MIL-PRF-32239 Revision A:2014
|
COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
ASTM D 3730 : 2017 : REDLINE
|
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 3451 : 2006
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 3451 : 2006 : R2017
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
NSF 51 : 2014
|
FOOD EQUIPMENT MATERIALS |
BS EN ISO 11439:2013
|
Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
DIN EN ISO 11439:2013-09
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
NACE SP 08 92 : 2007
|
COATINGS AND LININGS OVER CONCRETE FOR CHEMICAL IMMERSION AND CONTAINMENT SERVICE |
ISO 23160:2011
|
Watch cases and accessories Tests of the resistance to wear, scratching and impacts |
ISO/TS 15869:2009
|
Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
NACE TM 04 04 : 2004
|
Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation
|
EN ISO 11439:2013
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
NACE SP 03 02 : 2007
|
SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE |
NACE TM 03 04 : 2004
|
OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
NACE RP 03 02 : 2002
|
SELECTION AND APPLICATION OF A COATING SYSTEM TO INTERIOR SURFACES OF NEW AND USED RAIL TANK CARS IN MOLTEN SULFUR SERVICE |
NACE 6G197 : 0
|
DESIGN, INSTALLATION, AND MAINTENANCE OF COATING SYSTEMS FOR CONCRETE USED IN SECONDARY CONTAINMENT |
AWWA C550 : 2017
|
PROTECTIVE INTERIOR COATINGS FOR VALVES AND HYDRANTS |
SAE J 1976 : 2012
|
OUTDOOR WEATHERING OF EXTERIOR MATERIALS |
SAE AMS 3143 : 2016
|
POWDER COATING MATERIAL |
MIL-PRF-32584 Base Document:2017
|
Deck Covering Materials, Monolithic |
TT-C-555 Revision B:1973
|
COATING, TEXTURED (FOR INTERIOR AND EXTERIOR MASONRY SURFACES) |
MIL-PRF-32171 Revision B:2009
|
DECK COATINGS, HIGH DURABILITY |
MIL-PRF-24712 Revision B:2014
|
COATINGS, POWDER, THERMOSETTING |
SSPC-PAINT 39 : 2015
|
TWO-COMPONENT ALIPHATIC POLYUREA TOPCOAT, FAST- OR MODERATE-DRYING, PERFORMANCE-BASED |
MIL-C-52032 Revision D:1995
|
COATING, INTERIOR, FUEL RESISTANT, VOC COMPLIANT FOR GASOLINE CONTAINERS |
MIL-PRF-4556 Revision F:1998
|
COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
MIL-C-82747 Base Document:1988
|
COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
MIL C 4556 : E
|
COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
A-A-3126 Base Document:1972
|
COATING SYSTEM: TILE-LIKE HIGH PERFORMANCE ARCHITECTURAL |
MIL-C-24782 Base Document:1993
|
COATING, POWDERED FLUORPOLYMER FOR USE ON HIGH PRESSURE GAS FLASK INTERIORS |
MIL-PRF-32440 Base Document:2013
|
COATINGS, CHIP-, IMPACT-, WEAR-, AND ABRASION-RESISTANT |
MIL E 24763 : A
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL-R-53086 Base Document:1988
|
RUST CONVERTER, METRIC |
MIL C 24712 : A
|
COATINGS, POWDER (METRIC) |
MIL-C-81945 Revision B:1989
|
COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
I.S. CWA 15596:2006
|
CODE OF PRACTICE ON CLEANABILITY OF COMMERCIAL FOOD EQUIPMENT USED IN THE RETAIL AND CATERING SECTORS |
API 1631 : 2001
|
INTERIOR LINING AND PERIODIC INSPECTION OF UNDERGROUND STORAGE TANKS |
ASTM D 7270 : 2007 : R2013
|
Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM E 1795 : 2017 : REDLINE
|
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 7230 : 2006 : R2013
|
Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates |
ISO 11515:2013
|
Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
NACE SP 01 08 : 2008
|
CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
AWWA C218 : 2016
|
LIQUID COATINGS FOR ABOVEGROUND STEEL WATER PIPE AND FITTINGS |
ASTM D 6905 : 2003 : R2008
|
Standard Test Method for Impact Flexibility of Organic Coatings |
ASTM E 2924 : 2014
|
Standard Practice for Intumescent Coatings |
ASTM D 3732 : 1982 : R2005
|
Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 4956 : 2017 : REDLINE
|
SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
ASTM D 6905 : 2003
|
Standard Test Method for Impact Flexibility of Organic Coatings |
ANSI C57.12.29 : 2014
|
SWITCHGEAR AND TRANSFORMERS - PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY FOR COASTAL ENVIRONMENTS |
ASTM D 6665 : 2009 : R2014
|
Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test |
ASTM E 2486 : 2006
|
Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) |
ASTM D 16 : 2016 : REDLINE
|
TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
ASTM D 3732 : 1982 : R2017
|
Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 3732 : 1982 : R1996 : EDT 1
|
Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
AASHTO M 246 : 2015
|
SPECIFICATION FOR STEEL SHEET, METALLIC-COATED AND POLYMER-PRECOATED, FOR CORRUGATED STEEL PIPE |
ASTM E 1797 : 2012
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 3732 : 1982 : R2001
|
Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
ASTM D 6905 : 2003 : R2012
|
Standard Test Method for Impact Flexibility of Organic Coatings |
ASTM D 3732 : 1982 : R2011
|
Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
DD ISO/TS 15869:2009
|
Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks |
ASTM D 6665 : 2009
|
Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test |
BS ISO 11515 : 2013
|
GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
ASTM D 2454 : 2014-03
|
PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
ASTM D 8161 : 2017
|
Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight |
ASTM E 1797 : 2012 : R2017 : EDT 1
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
IEEE C57.12.31-2010
|
IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
ISO 11439:2013
|
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
ASTM D 7270 : 2007
|
Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
ASTM D 7230 : 2006
|
Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates |
IEEE C57.12.28-2014
|
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity |
ISO 19867-1:2018
|
Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
ASTM D 2336 : 1999
|
Standard Guide for Specifying Factory Applied Wood Coatings (Withdrawn 2008) |
ASTM E 1420 : 1991
|
Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
CSA B51S1 : 2005
|
SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
I.S. EN ISO 11439:2013
|
GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
CSA M671 : 1999
|
SLOW-MOVING VEHICLE IDENTIFICATION EMBLEM |
N287.2-17
|
Material requirements for concrete containment structures for nuclear power plants |
CSA B51 : 2014
|
BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
CSA G401 : 2014
|
CORRUGATED STEEL PIPE PRODUCTS |
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 3451 : 2006 : R2012
|
Standard Guide for Testing Coating Powders and Powder Coatings |
ASTM F 2589 : 2016 : REDLINE
|
Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
MSS SP 98 : 2015
|
PROTECTIVE COATINGS FOR THE INTERIOR OF VALVES, HYDRANTS, AND FITTINGS |
NACE 02203 : 0
|
DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE |
SAE AIR 5479 : 2017
|
ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR |
SAE USCAR 9 : 1998
|
CLASSIFICATION SYSTEM FOR AUTOMOTIVE TOOLING, MACHINERY AND EQUIPMENT LOW VOC WATERBORNE PAINT SYSTEMS |
BS ISO 23160:2011
|
Watch cases and accessories. Tests of the resistance to wear, scratching and impacts |
SDI A250.3 : 2007(R2011)
|
TEST PROCEDURE AND ACCEPTANCE CRITERIA FOR - FACTORY APPLIED FINISH COATINGS FOR STEEL DOORS AND FRAMES |
ASTM F 2408 : 2016 : REDLINE
|
Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
ASTM D 5420 : 2016 : REDLINE
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
IEEE C57.12.32-2002
|
IEEE Standard for Submersible Equipment - Enclosure Integrity |
ANSI C57.12.28 : 2014
|
PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY |
UNE-EN ISO 11439:2013
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
NACE SP 04 87 : 2007
|
CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
UNI EN ISO 11439 : 2013
|
GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
SAE AMS 3144 : 2012
|
PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
SAE AMS 3107 : 1983(R2014)
|
PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |