ASTM D 297 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Rubber Products—Chemical Analysis
Available format(s)
PDF
Superseded date
22-01-2022
Superseded by
Language(s)
English
Published date
01-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 09.01, 2015 Defines the qualitative and quantitative analysis of the composition of rubber products of the 'R' family.
| Committee |
D 11
|
| DevelopmentNote |
Supersedes ASTM D 834 (12/2001)
|
| DocumentType |
Redline
|
| Pages |
48
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1These test methods cover the qualitative and quantitative analysis of the composition of rubber products of the “R” family (see 3.1). Many of these test methods may be applied to the analysis of natural and synthetic crude rubbers.
1.1.1Part Aconsists of general test methods for use in the determination of some or all of the major constituents of a rubber product.
1.1.2Part Bcovers the determination of specific polymers present in a rubber product.
1.1.3The test methods appear in the following order:
| Part A. General Test Methods: | Sections |
| Rubber Polymer Content by the Indirect Method | 11 – 13 |
| Determinations and Report for the General Method | 14 and 15 |
| Density | 16 |
| Extract Analysis | 17 – 26 |
| Sulfur Analysis | 27 – 33 |
| Fillers Analysis | 34 – 40 |
| Ash Analysis | 41 – 51 |
| Part B. Determination of Rubber Polymers | 52 – 58 |
1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary or warning statements are given in 31.4.5, 31.6, 37.4.2, 38.4.2, 45.1.3, 53.2.3.5, 54.4.2, 54.6, 56.5.3, and 57.7.3; and X1.3.3 and X2.4.1.6.
| Standards | Relationship |
| UNE 53562:1974 | Identical |
| UNE 53563:1974 | Identical |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| SAE AMS7254B | Perfluoroether Elastomer |
| SAE AMS3331C | Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 – 75 Shore A Hardness For Products in Fuel Systems/Lubricating Oils |
| DDD-C-001799 Base Document:1972 | CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION |
| SAE AMS3210H | Chloroprene (CR) Rubber Electrical Resistant 65 - 75 |
| MIL G 12223 : J | GLOVES, TOXICOLOGICAL AGENTS PROTECTIVE |
| SAE AMS3357G | RUBBER, SILICONE (VMQ) Lubricating Oil and Compression Set Resistant 65 - 75 |
| CSA Z259.7 : 0 | RUBBER INSULATING LINE HOSE |
| ASTM D 5774 : 1995 : R2000 | Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables |
| MIL-B-41816 Revision H:1990 | BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD) |
| MIL-R-6130 Revision C:1980 | RUBBER, CELLULAR, CHEMICALLY BROWN |
| SAE AMS3217A | Standard Elastomer Stocks Test Slabs |
| MIL-DTL-85052 Revision B:2005 | CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| SAE AMSR83485A | Rubber, Fluorocarbon Elastomer, Improved Perfrormance At Low Temperatures |
| SAE AMS3227H | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65 |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE; RUBBER SHEET SOLID |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| SAE AMS R 6130 : 2001 | RUBBER, CELLULAR, CHEMICALLY BLOWN |
| ASTM D 6370 : 1999 : R2003 | Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
| SAE AMS7259E | Rubber: Fluorocarbon (FKM) High Temperature/Fluid Resistant Low Compression Set/85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| SAE AMS3332F | Silicone Rubber Extreme Low-Temperature Resistant 15 - 30 |
| MIL H 28693 : 0 | HOSE, RUBBER, OIL & GASOLINE DISCHARGE, SMOOTH BORE, LIGHTWEIGHT BUOYANT TYPE, LONGITUDINALLY REINFORCED, 6 INCH |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| AASHTO M 261 : 1996 | SPECIFICATION FOR RIB-TREAD STANDARD TIRE FOR SPECIAL-PURPOSE PAVEMENT FRICTIONAL-PROPERTY TESTS |
| SAE AMSR25988A | Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes |
| SAE AMS3337F | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75 |
| SAE AMS3304H | Silicone, Rubber General Purpose 70 Durometer |
| FSA PSJ 703 : 2011 | GUIDELINES FOR ELASTOMERS USED IN PIPING SYSTEMS NON-METALLIC EXPANSION JOINTS |
| SAE AMS3216H | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80 |
| ASTM D 1050 : 2005 : R2011 | Standard Specification for Rubber Insulating Line Hose |
| ASTM D 1050 : 2005 : R2017 | Standard Specification for Rubber Insulating Line Hose |
| ASTM C 990 : 2009 : R2014 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants |
| ASTM D 3452 : 2006 | Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography |
| ASTM D 5963 : 2004 : R2010 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| ASTM D 1049 : 1998 : R2002 | Standard Specification for Rubber Insulating Covers |
| ASTM D 5774 : 1995 : R2014 | Standard Test Methods for Rubber—Chemical Analysis of Extractables |
| ASTM E 1844 : 2008 | Standard Specification for A Size 10 <span class='unicode'>×</span> 4<span class='unicode'>–</span>5 Smooth-Tread Friction Test Tire |
| ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 7999 : 2015 | Standard Classification for Rubber Products in Natural Gas Pipeline Applications |
| SAE J2884_201406 | Thermoset Elastomer Specification System |
| ASTM D 1416 : 1989 | Test Methods for Rubber from Synthetic Sources--Chemical Analysis (Withdrawn 1996) |
| SAE AMS3217/1B | Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75 |
| ASTM D 3452 : 2006 : R2017 | Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography |
| SAE AMS 3240 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
| PD ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber. Evaluation procedure |
| ASTM D 5774 : 1995 : R2004 : EDT 1 | Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables |
| A-A-1936 Revision A:1996 | ADHESIVES, CONTACT, NEOPRENE RUBBER |
| ASTM E 524 : 2008 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
| MIL C 915 : F | CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
| SAE AMS7338 | Rubber: Butyl (IIR Abbreviation) Phosphate Ester Resistant 65 to 75 Hardness For Seals In Hydraulic Systems, etc. |
| SAE AMS3329C | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45 – 55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS / LUBRICATING OILS |
| BS 7164-23.1:1993 | Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content Oxygen combustion flask method |
| ASTM D 5644 : 2001 : R2013 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM D 7567 : 2009 | Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction (Withdrawn 2015) |
| DDD-C-001630 Base Document:1973 | CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE |
| A-A-59567 Revision A:2014 | HOSE AND HOSE ASSEMBLIES, RUBBER (YARN OR FABRIC REINFORCED) WATER SERVICE |
| ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
| ASTM D 1278 : 1991 : REV A : R2015 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| MIL-S-19653 Revision B:1984 | SEALING COMPOUND (WOOD BEDDING), FORTIFIED |
| AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
| CSA Z259.8 : 0 | RUBBER INSULATING COVERS |
| ASTM E 501 : 2008 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
| SAE AMS3301H | Silicone, Rubber General Purpose 40 Durometer |
| SAE AMS3382D | Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness |
| ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
| AWWA C303 : 2017 | CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
| ASTM C 990 : 2009 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants |
| ASTM D 3452 : 2006 : R2012 | Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography |
| SAE AMSR83248A | Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| ASTM D 6049 : 2003 : R2008 | Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM D 3156 : 1996 : R2001 | Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) |
| ASTM D 1049 : 1998 : R2002 : EDT 1 | Standard Specification for Rubber Insulating Covers |
| ASTM D 6814 : 2002 : EDT 1 | Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density |
| ASTM D 7106/D7106M : 2005 : R2015 : EDT 1 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM D 6814 : 2002 : R2008 | Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density |
| ASTM F 2157 : 2009-02 | SPECIFICATION FOR SYNTHETIC SURFACED RUNNING TRACKS |
| CSA Z259.4 : 0 | RUBBER INSULATING GLOVES AND MITTS |
| ASTM D 5140 : 1995 | Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004) |
| ASTM D 5963 : 2004 : R2010 : EDT 1 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASHRAE GUIDELINE 6 : 2015 | REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
| SAEITC TS170-5 | TS170 Woven Glassfibre Cushion Sleeving and Respective Loop Style Clamp Assemblies for use at Temperatures up to 550°C |
| SAEITC TS147-8 | TS147 Silicone Elastomer, Glassfibre Fabric Reinforced Cushion (for Use in Loop Style Clamp Assemblies) |
| SAE AMS3349D | Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 |
| FSA DSJ 401 : 2009 | SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER |
| SAE AMS3338G | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 75 - 85 |
| ASTM D 5963 : 2004 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| MIL-C-19002 Revision D:1985 | CLOTH, COATED, & STRIP, COATED CLOTH POLYCHLOROPRENE ON NYLON |
| CSA Z259.6 : 0 | RUBBER INSULATING BLANKETS |
| MIL-DTL-43976 Revision D:2003 | GLOVES AND GLOVE SET, CHEMICAL PROTECTIVE |
| MIL-DTL-32145 Base Document:2004 | Neck Seal, Flyers\', Anti-Exposure, Ruggedized |
| MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| A-A-55063 Revision A:2012 | APRON, UTILITY, IMPERMEABLE, RUBBER COATED FABRIC (GENERAL PURPOSE) |
| ASTM D 1278 : 1991 : REV A : R2002 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| MIL-DTL-915 Revision G:2002 | Cable, Electrical, for Shipboard Use, General Specification for |
| ASTM C 990M : 2009 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric) |
| ASTM D 1049 : 1998 : R2017 | Standard Specification for Rubber Insulating Covers |
| ASTM D 1049 : 1998 : R2010 | Standard Specification for Rubber Insulating Covers |
| SAE AMS 3242 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
| ASTM D 178 : 2001 | Standard Specification for Rubber Insulating Matting |
| MIL-R-83283 Revision A:1991 | RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| ASTM D 6814 : 2002 : R2013 | Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density |
| SAE AMS3305J | Silicone, Rubber General Purpose 80 Durometer |
| ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| SAE AMSR7362A | Nitrile Rubber, Synthetic, Solid, Sheet, Strip and Fabricated Parts, Synthetic Oil Resistant |
| ASTM D 7106 : 2005 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM E 501 : 2008 : R2015 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
| SAE AMS3215M | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75 |
| ASTM D 3156:1996 | Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) |
| ASTM D 6576 : 2013 : REDLINE | Standard Specification for Flexible Cellular Rubber Chemically Blown |
| SAE AMSP5315B | Acrylonitrile-butadiene (NBR) Rubber For Fuel-Resistant Seals 60 to 70 |
| ASTM D 3156 : 1996 : R2016 | Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) |
| SAE AMS3325F | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 – 65 |
| ASTM D 6049 : 2003 | Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM D 6049 : 2003 : R2017 | Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| ASTM E 670 : 2009 | Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter |
| ASTM D 3156 : 1996 : R2011 | Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) |
| ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber Evaluation procedure |
| ASTM E 670 : 2009 : R2015 | Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter |
| SAE AMS3238H | Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 |
| MIL-I-62522 Base Document:1987 | INSULATION, PANEL, NOISE AND THERMAL-BARRIER |
| PD ISO/TS 16095:2014 | Reclaimed rubber derived from products containing mainly natural rubber. Evaluation procedure |
| MIL H 17505 : E | HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE |
| ASTM D 178 : 2001 : EDT 1 | Standard Specification for Rubber Insulating Matting |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| SAE AMS3226H | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55 |
| MIL-DTL-25988 Revision C:2006 | RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
| SAE AMS3250K | Synthetic Rubber and Cork Composition General Purpose Soft |
| SAE AMS3345F | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer |
| MIL-DTL-28693 Revision B:2016 | Hose, Rubber, Oil and Gasoline Discharge, Smooth Bore, Lightweight Buoyant Type, Longitudinally Reinforced, 6 Inch |
| ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
| SAE AMS3334F | Silicone Rubber Extreme Low-Temperature Resistant 35 - 45 |
| SAE AMS3251J | Synthetic Rubber and Cork Composition General Purpose Medium |
| SAE AMS3212P | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 55 - 65 |
| ASTM D 178 : 2001 : R2005 | Standard Specification for Rubber Insulating Matting |
| MIL G 43976 : C | GLOVE & GLOVE SET, CHEMICAL PROTECTIVE |
| DDD-C-95 Base Document:1965 | CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC |
| ASTM D 1278 : 1991 : REV A : R2007 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| SAE AMS3347C | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 – 55 |
| SAE AMS3346G | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer |
| SAE AMS3328C | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 – 45 |
| SAE AMS3237F | Butyl (IIR) Rubber Phosphate Ester Resistant 35 - 45 |
| SAE AMS3704A | Adhesive, Contact Polychloroprene (CR) Rubber, Resin Modified |
| ANSI/AWWA C200 : 2017 | STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
| ASTM D 6370 : 1999 : R2009 | Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D 1050 : 2005 | Standard Specification for Rubber Insulating Line Hose |
| ASTM D 5963 : 2004 : R2015 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| SAE AMS7287 | Fluorocarbon Elastomer (FKM) High Temperature / HTS Oil Resistant / Fuel Resistant Low Compression Set / 70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C) For Seals in Oil / Fuel / Specific Hydraulic Systems |
| ASTM D 1050 : 2005 : EDT 1 | Standard Specification for Rubber Insulating Line Hose |
| ASTM C 990M : 2009 : R2014 | Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric) |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| ASTM D 3156 : 1996 : R2005 | Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers) |
| ASTM D 6049 : 2003 : R2013 | Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates |
| MIL-DTL-32237 Revision C:2016 | BOOT, COMBAT, HOT WEATHER ARMY |
| ASTM D 5644 : 2001 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM D 3900 : 2017 : REDLINE | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| MIL-C-10369 Revision D:1958 | CABLE, TELEPHONE, FIELD, FOR RAPID PAYOUT (MX-306 A/G) |
| SAE AMS3213M | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85 |
| SAE AMSR83285A | Rubber, Ethylene-Propylene, General Purpose |
| ASTM E 1551 : 2016 : REDLINE | Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire |
| SAE AMS7274J | Rubber: Butadiene-Acrylonitrile (NBR) 65 to 75 Hardness, For Elastomeric Seals in Aircraft Engine Oil Systems |
| CSA Z259.5 : 0 | RUBBER INSULATING SLEEVES |
| ASTM D 3677 : 2010 : EDT 1 | Standard Test Methods for Rubber<char: emdash>Identification by Infrared Spectrophotometry |
| HH-P-31 Revision F:1987 | PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE |
| SAE AMS3330C | Elastomer: Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 – 55 For Products in Fuel Systems/Lubricating Oils |
| MMM-A-182 Revision A:1967 | Adhesive, Rubber |
| ASTM D 1049 : 1998 | Standard Specification for Rubber Insulating Covers |
| MIL-DTL-17505 Revision G:2014 | Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge |
| MIL-A-87134 Base Document:1978 | ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS |
| MIL-C-17415 Revision F:1989 | CLOTH, COATED, AND WEBBING, INFLATABLE BOAT AND MISCELLANEOUS USE |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| SAE AMS7257E | Perfluorocarbon (FFKM) Engine Oil, Fuel and Hydraulic Fluid Resistant 70 to 80 Hardness For High Temperature Seals in Engine Oil Systems, Fuel Systems and Hydraulic Systems |
| GG-C-1320 Revision B:1985 | CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM) |
| MIL-DTL-45301 Revision E:1998 | TREAD ELASTOMER: SOLID TIRE, FOR TRACK LAYING VEHICLES |
| ASTM D 178 : 2001 : R2010 | Standard Specification for Rubber Insulating Matting |
| MIL-C-14505 Revision D:1983 | CLOTH, NYLON, POLYCHLOROPRENE-COATED (FOR PNEUMATIC FLOATING EQUIPMENT) |
| ASTM D 2765 : 2016 : REDLINE | Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
| ASTM D 178 : 2001 : EDT 2 | Standard Specification for Rubber Insulating Matting |
| ISO/TS 16096:2014 | Reclaimed isobutene-isoprene (IIR) rubber Evaluation procedure |
| SAE AMS3348D | Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35 |
| SAE AMS3384 | Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems |
| SAE AMS3229J | Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85 |
| SAE AMS3218D | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 |
| ASTM D 6370 : 1999 | Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA) |
| AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
| ASTM D 6370 : 1999 : R2014 | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| SAE AMS3356F | Silicone (VMQ) Rubber Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65 |
| ASTM D 1278 : 1991 : REV A : R2011 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 6909 : 2010 : R2016 | Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer |
| SAE AMSR83283A | Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type |
| ASTM D 3677 : 2010 : R2015 | Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| ASTM D 6909 : 2010 | Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer |
| ASTM D 7106 : 2005 : R2010 | Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM D 5644 : 2001 : R2008 : EDT 1 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM E 524 : 2008 : R2015 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
| ASTM D 8115 : 2017 | Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader) |
| ASTM E 1844 : 2008 : R2015 | Standard Specification for A Size 10 × 4–5 Smooth-Tread Friction Test Tire |
| ASTM D 3677 : 2010 | Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry |
| ASTM D 5774 : 1995 : R2009 | Standard Test Methods for Rubber-Chemical Analysis of Extractables |
| ASTM D 5774 : 1995 : R2004 : EDT 2 | Standard Test Methods for Rubber-Chemical Analysis of Extractables |
| ASTM D 5644 : 2001 : R2008 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
| ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 6047 : 2017 : REDLINE | Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 1416 : 1989 | Test Methods for Rubber from Synthetic Sources--Chemical Analysis (Withdrawn 1996) |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
| ASTM E 442 : 1991 | Test Method for Chlorine, Bromine, or Iodine in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997) |
| ASTM D 982 : 2016 : REDLINE | Standard Test Method for Organic Nitrogen in Paper and Paperboard |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.