ISO 812:2017
|
Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
ASME PV CODE 8 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
ASTM D 297 : 2015 : REDLINE
|
Standard Test Methods for Rubber Products—Chemical Analysis |
ISO 1432:2013
|
Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 10893-5:2011
|
Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ASTM D 429 : 2014 : REDLINE
|
Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
API 20A : 2017
|
CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
API 5CT : 2012
|
CASING AND TUBING |
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
ASTM D 736 : 1954
|
Method of Test for Low-Temperature Brittleness of Rubber and Rubber-Like Materials (Withdrawn 1965) |
ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
ASME PV CODE 8 DIV 3 : 2017
|
BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
ASME B46.1 : 2009
|
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
SAE AS 568 : 2014
|
AEROSPACE SIZE STANDARD FOR O-RINGS |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ISO 23936-2:2011
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
API 6J : 1992
|
BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
API Q1 : 2013
|
SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
ASME PV CODE 5 : 2017
|
BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
ASTM E 111 : 2017 : REDLINE
|
Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
BS 2M 54:1991
|
Specification for temperature control in the heat treatment of metals |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
API TR 1PER15K-1 : 2013
|
PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
ISO 3601-1:2012
|
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
ASTM D 695 : 2015 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Plastics |
SAE AMS H 6875 : 2010
|
HEAT TREATMENT OF STEEL RAW MATERIALS |
ISO 3601-3:2005
|
Fluid power systems O-rings Part 3: Quality acceptance criteria |
ISO 34-2:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 329 : 2007
|
Standard Specification for Acetone |
MIL-STD-413 Revision C:1980
|
VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 12095:1994
|
Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |