ASTM D 3182 : 2021
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
Hardcopy , PDF
06-01-2022
English
20-07-2021
Committee |
D 11
|
DocumentType |
Standard Practice
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice provides a listing of reference compounding materials required to prepare the rubber test compounds listed in succeeding methods and contains procedures for weighing. It also specifies the mixing equipment, general mixing procedures, vulcanization equipment and procedures.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific warning statement, see 5.4.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 1646 : 2019 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM E 670 : 2009 : R2020 | Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter |
ASTM D 3190 : 2006 : R2016 | Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR) |
ASTM D 3403 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber) |
ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
ASTM D 4811/D4811M : 2016 | Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing |
ASTM D 6746 : 2015 : R2020 | Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds |
ASTM D 3004 : 2008 : R2020 | Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials |
ASTM D 3185 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil |
ASTM D 1456 : 1986 : R2020 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
ASTM D 5963 : 2004 : R2019 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM E 501 : 2008 : R2020 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
ASTM D 4482 : 2011 : R2021 | Standard Test Method for Rubber Property—Extension Cycling Fatigue |
ASTM D 1917 : 2003 : R2017 | Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR) |
ASTM C 1083 : 2006 : R2020 : EDT 1 | Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials |
ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 6338 : 2017 | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM F 2870 : 2019 | Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire |
ASTM D 5099 : 2008 : R2017 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
ASTM D 1248 : 2016 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM F 640 : 2020 | Standard Test Methods for Determining Radiopacity for Medical Use |
ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
ASTM F 2493 : 2020 | Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire |
ASTM D 3189 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber) |
ASTM D 1148 : 2013 : R2018 | Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces |
ASTM C 1115 : 2017 | Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories |
ASTM D 1330 : 2004 : R2015 : EDT 1 | Standard Specification for Rubber Sheet Gaskets |
ASTM D 3771 : 2015 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
ASTM D 4289 : 2019 | Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids |
ASTM D 750 : 2012 : R2021 | Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus |
ASTM D 413 : 1998 : R2017 | Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate |
ASTM F 2871 : 2016 | Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire |
ASTM D 1485 : 2007 : R2020 | Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation |
ASTM D 925 : 2014 : R2019 | Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) |
ASTM D 3157 : 2005 : R2020 | Standard Test Method for Rubber from Natural Sources—Color |
ASTM D 3186 : 2007 : R2016 | Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil |
ASTM D 991 : 1989 : R2020 | Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products |
ASTM D 3184 : 2011 : R2018 | Standard Practice for Rubber—Evaluation of NR (Natural Rubber) |
ASTM E 1551 : 2016 : R2020 | Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire |
ASTM D 2230 : 2017 : EDT 1 | Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds |
ASTM G 74 : 2013 | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
ASTM D 3568 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil |
ASTM D 395 : 2018 | Standard Test Methods for Rubber Property—Compression Set |
ASTM D 623 : 2007 : R2019 : EDT 1 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
ASTM D 573 : 2004 : R2019 | Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 2632 : 2015 : R2019 | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
ASTM F 2872 : 2019 | Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire |
ASTM D 816 : 2006 : R2016 | Standard Test Methods for Rubber Cements |
ASTM E 1136 : 2019 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
ASTM D 6284 : 2017 | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine |
ASTM D 2663 : 2014 : R2019 : EDT 1 | Standard Test Methods for Carbon Black—Dispersion in Rubber |
ASTM D 3187 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber) |
ASTM F 1909 : 1998 : R2020 | Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets |
ASTM D 3194 : 2017 | Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI) |
ASTM D 2692/D2692M : 2015 | Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns (Withdrawn 2024) |
ASTM D 572 : 2004 : R2019 | Standard Test Method for Rubber—Deterioration by Heat and Oxygen |
ASTM C 864 : 2005 : R2019 | Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers |
ASTM D 454 : 2004 : R2019 | Standard Test Method for Rubber Deterioration by Heat and Air Pressure |
ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 7121 : 2005 : R2018 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
ASTM E 524 : 2008 : R2020 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
ASTM D 3188 : 2006 : R2017 | Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber) |
ASTM F 2466 : 2010 : R2018 | Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications |
ASTM D 8363 : 2020 | Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions |
ASTM D 624 : 2000 : R2020 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 1417 : 2016 | Standard Test Methods for Rubber Latices—Synthetic |
ASTM D 2228 : 2004 : R2019 | Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method |
ASTM D 2287 : 2019 | Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
ASTM D 4122 : 2017 : EDT 1 | Standard Practice for Carbon Black—Evaluation of an Industry Reference Black |
ASTM D 3346 : 2017 | Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney) |
ASTM D 865 : 2011 : R2018 | Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure) |
ASTM E 1844 : 2008 : R2020 | Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire |
ASTM D 3484 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber) |
ASTM E 2203 : 2014 : R2018 | Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories |
ASTM D 3667 : 2016 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
ASTM D 5668 : 2019 | Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter |
ASTM D 1056 : 2020 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
ASTM D 3137 : 1981 : R2018 | Standard Test Method for Rubber Property—Hydrolytic Stability |
ASTM D 3958 : 2006 : R2016 | Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber) |
ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 3183 : 2010 : R2019 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
ASTM D 3848 : 2003 : R2018 | Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black |
ASTM D 813 : 2007 : R2019 | Standard Test Method for Rubber Deterioration—Crack Growth |
ASTM D 1460 : 1986 : R2020 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM D 6147 : 1997 : R2020 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 3191 : 2010 : R2020 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
ASTM G 74 : 2013 : R2021 | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
API RP 13B-2:2023 | Field Testing Oil-based Drilling Fluids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.