ASTM D 5477 : 2018
Current
The latest, up-to-date edition.
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
Hardcopy , PDF
English
01-08-2018
This practice describes the techniques used for detecting two different polymer entities such as: 1.1.1 Abnormal specks or spots on a surface or in the film that are objectionable as defects and 1.1.2 Layers of different polymeric sheets commonly used as barrier films made by coextrusion.
Committee |
D 20
|
DocumentType |
Standard Practice
|
Pages |
4
|
ProductNote |
ASTM D 1600 : 2018
ASTM E 131 : 10(2015) ASTM E 168 : 2016 ASTM E 2015 : 04(2014) This standard also refers |
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice describes the techniques used for detecting two different polymer entities such as:
1.1.1Abnormal specks or spots on a surface or in the film that are objectionable as defects and
1.1.2Layers of different polymeric sheets commonly used as barrier films made by coextrusion.
1.2This practice utilizes through-transmittance optical and infrared techniques.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.
Note 1:There is no known ISO equivalent to this standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 1600 : 1999 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM D 1248 : 2002 | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
ASTM D 1248 : 1984 : R1989 : EDT 1 | Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
ASTM E 131 : 2010 : R2023 | Standard Terminology Relating to Molecular Spectroscopy |
ASTM E 2015 : 1999 | Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
ASTM D 1248 : 2012 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM E 168 : 2016 : R2023 | Standard Practices for General Techniques of Infrared Quantitative Analysis |
ASTM E 2015 : 2004 : R2021 | Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
ASTM E 2015 : 2004 : R2014 | Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM D 1248 : 2016 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 1600 : 2007 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 1600 : 2013 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM E 2015 : 2004 | Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
ASTM D 1600 : 2014 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM D 1600 : 2008 | Standard Terminology for Abbreviated Terms Relating to Plastics |
ASTM E 131 : 2010 : R2015 | Standard Terminology Relating to Molecular Spectroscopy |
ASTM D 1248 : 2004 | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
ASTM E 2015 : 2004 : R2009 | Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
ASTM D 1600 : 2018 | Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
ASTM D 1248 : 2000 : REV A | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
ASTM D 1248 : 2005 | Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable |
ASTM E 168 : 2016 | Standard Practices for General Techniques of Infrared Quantitative Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.