Skip to content
Please enter a keyword to search

  • ASTM D 6837 : 2013

    Current The latest, up-to-date edition.

    Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine (Withdrawn 2022)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  07-06-2013

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight of 3856 kg or less. The tests are conducted on a dynamometer test stand using a specified spark-ignition engine with a displacement of 4.6-L. It applies to multiviscosity grade oils used in these applications.

    1.2This test method also provides for the running of an abbreviated length test that is referred to as the VIBSJ. The procedure for VIBSJ is identical to the Sequence VIB with the exception of the items specifically listed in Annex A13. The procedure modifications listed in Annex A13 refer to the corresponding section of the Sequence VIB test method.

    1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.3.1Exceptions—Where there is no direct SI equivalent such as screw threads, National Pipe Threads/diameters, tubing size, or single source supply equipment specifications. Brake Specific Fuel Consumption is measured in kilograms per kilowatthour. In Figs. A2.4, A2.5, and A2.8, inch-pound units are to be regarded as standard.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    1.5This test method is arranged as follows:

    Subject

    Section

    Introduction

    Scope

    1

    Referenced Documents

    2

    Terminology

    3

    Summary of Test Method

    4

    Significance and Use

    5

    Apparatus

    6

     General

    6.1

     Test Engine Configuration

    6.2

     Laboratory Ambient Conditions

    6.3

     Engine Speed and Torque Control

    6.4

      Dynamometer

    6.4.1

      Dynamometer Torque

    6.4.2

     Engine Cooling System

    6.5

     External Oil System

    6.6

     Fuel System

    6.7

      Fuel Flow Measurement

    6.7.2

      Fuel Temperature and Pressure Control to
       the Fuel Flowmeter

    6.7.3

      Fuel Temperature and Pressure Control to
       Engine Fuel Rail

    6.7.4

     Fuel Supply Pumps

    6.7.5

      Fuel Filtering

    6.7.6

     Engine Intake Air Supply

    6.8

      Intake Air Humidity

    6.8.1

      Intake Air Filtration

    6.8.2

      Intake Air Pressure Relief

    6.8.3

     Temperature Measurement

    6.9

      Thermocouple Location

    6.9.5

     AFR Determination

    6.10

     Exhaust and Exhaust Back Pressure Systems

    6.11

      Exhaust Manifolds

    6.11.1

      Laboratory Exhaust System

    6.11.2

      Exhaust Back Pressure

    6.11.3

     Pressure Measurement and Pressure Sensor
      Locations

    6.12

      Engine Oil

    6.12.2

      Fuel to Fuel Flowmeter

    6.12.3

      Fuel to Engine Fuel Rail

    6.12.4

      Exhaust Back Pressure

    6.12.5

      Intake Air

    6.12.6

      Intake Manifold Vacuum/Absolute Pressure

    6.12.7

      Coolant Flow Differential Pressure

    6.12.8

      Crankcase Pressure

    6.12.9

     Engine Hardware and Related Apparatus

    6.13

      Test Engine Configuration

    6.13.1

      ECM/EEC (Engine Control) Module

    6.13.2

      Thermostat/Orifice Plate

    6.13.3

      Intake Manifold

    6.13.4

      Flywheel

    6.13.5

      Wiring Harnesses

    6.13.6

      EGR Block-Off Plate

    6.13.7

      Oil Pan

    6.13.8

      Oil Pump Screen and Pickup Tube

    6.13.9

      Idle Speed Control Solenoid (ISC) Block-Off
       Plate

    6.13.10

      Engine Water Pump

    6.13.11

      Thermostat Housing

    6.13.12

      Oil Filter Adapter

    6.13.13

      Fuel Rail

    6.13.14

     Miscellaneous Apparatus Related to Engine
      Operation

    6.14

      Timing Light

    6.14.1

    Reagents and Materials

    7

     Engine Oil

    7.1

     Test Fuel

    7.2

     Engine Coolant

    7.3

     Cleaning Materials

    7.4

    Preparation of Apparatus

    8

     Test Stand Preparation

    8.2

    Engine Preparation

    9

     Cleaning of Engine Parts

    9.2

     Engine Assembly Procedure

    9.3

      General Assembly Instructions

    9.3.1

      Bolt Torque Specifications

    9.3.2

      Sealing Compounds

    9.3.3

      Harmonic Balancer

    9.3.5

      Oil Pan

    9.3.6

      Intake Manifold

    9.3.7

      Camshaft Covers

    9.3.8

      Thermostat

    9.3.9

      Thermostat Housing

    9.3.10

      Coolant Inlet

    9.3.11

      Oil Filter Adapter

    9.3.12

      Dipstick Tube

    9.3.13

      Water Pump

    9.3.14

      Sensors, Switches, Valves, and Positioners

    9.3.15

      Ignition System

    9.3.16

      Fuel Injection System

    9.3.17

      Intake Air System

    9.3.18

      Engine Management System (Spark and Fuel
       Control)

    9.3.19

      Accessory Drive Units

    9.3.20

      Exhaust Manifolds

    9.3.21

      Engine Flywheel and Guards

    9.3.22

      Lifting of Assembled Engines

    9.3.23

      Engine Mounts

    9.3.24

    Calibration

    10

     Stand/Engine Calibration

    10.1

      Procedure

    10.1.1

      Reporting of Reference Results

    10.1.2

      Analysis of Reference/Calibration Oils

    10.1.3

      Instrument Calibration

    10.2

      Engine Torque Measurement System

    10.2.1

      Fuel Flow Measurement System

    10.2.2

      Coolant Flow Measurement System

    10.2.3

      Thermocouple and Temperature Measurement
       System

    10.2.4

      Humidity Measurement System

    10.2.5

      Other Instrumentation

    10.2.6

    Test Procedure

    11

     Preparation for Initial Start-up of New Engine

    11.1

      External Oil System

    11.1.1

      Flush Effectiveness Demonstration

    11.1.2

      Preparation for Oil Charge

    11.1.3

      Oil Charge for Coolant Flush

    11.1.4

      Engine Coolant Charge for Coolant Flush

    11.1.5

     Initial Engine Start-up

    11.2

     Coolant Flush

    11.3

     New Engine Break-In

    11.4

      Oil Charge for Break-In

    11.4.2

      Break-In Operating Conditions

    11.4.3

     Routine Test Operation

    11.5

      Start-Up and Shutdown Procedures

    11.5.8

      Flying Flush Oil Exchange Procedures

    11.5.9

      Test Operating Stages

    11.5.10

      Stabilization to Stage Conditions

    11.5.11

      Stabilized BSFC Measurement Cycle

    11.5.12

      Data Logging

    11.5.13

      BC Oil Flush Procedure for BC Oil Before Test
       Oil

    11.5.14

     BSFC Measurement of BC Oil Before Test Oil

    11.5.15

      Test Oil Flush Procedure

    11.5.16

      Test Oil Aging

    11.5.17

      BSFC Measurement of Aged (Phase I) Test Oil

    11.5.18

      Aging Phase II

    11.5.19

      BSFC Measurement of Aged (Phase II) Test Oil

    11.5.21

      BC Oil Flush Procedure for BC Oil After Test Oil

    11.5.22

      BSFC Measurement for BC Oil After Test Oil

    11.5.23

      General Test Data Logging Forms

    11.5.24

      Diagnostic Review Procedures

    11.5.25

     Determination of Test Results

    12

      FEI1 and FEI2 Calculations

    12.1

     Final Test Report

    13

      Validity Statement

    13.1

      Report Format

    13.2

    Precision and Bias

    14

     Precision

    14.1

     Validity

    14.2

      Test Stand Calibration Status

    14.2.1

      Validity Interpretation of Deviant Operational
       Conditions

    14.2.2

     Bias

    14.3

    Keywords

    15

    Annexes

    Role of ASTM TMC

    Annex A1

    Detailed Specifications and Drawings of Apparatus

    Annex A2

    Oil Heater Cerrobase Refill Procedure

    Annex A3

    Engine Part Number Listing

    Annex A4

    Flying Flush Checklists

    Annex A5

    Safety Precautions

    Annex A6

    Report Format

    Annex A7

    Statistical Equations for Mean and Standard
     Deviations

    Annex A8

    Oil Sump Full Level Determination Consumption
     Measurement Calibration Procedure

    Annex A9

    Fuel Injector Evaluation

    Annex A10

    Pre-test Maintenance Checklist

    Annex A11

    Blow-by Ventilation System Requirements

    Annex A12

    VIBSJ Abbreviated Length Test Requirements

    Annex A13

    Appendix

    Procurement of Test Materials

    Appendix X1


    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Test Method
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 7589 : 2016 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
    ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 8226 : 2021 : REV A Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
    ASTM D 8114 : 2021 : REV A Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4175 : 2020 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2014 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2003 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2009 : REV A : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2699 : 2016 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 2699 : 2011 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 3338 : 1992 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    ASTM D 4175 : 2008 : REV B : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2006 Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2005 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2011 : REV C Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 2699 : 1999 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 1319 : 1989 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
    ASTM D 4175 : 2005 : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 1319 : 2008 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6750 : 2017 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 2699 : 2004 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4485 : 2001 Standard Specification for Performance of Engine Oils
    ASTM D 2699 : 2007 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 3231 : 1999 Standard Test Method for Phosphorus in Gasoline
    ASTM D 2699 : 2013 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2015 : REV C Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 3231 : 2013 Standard Test Method for Phosphorus in Gasoline
    ASTM D 4175 : 2020 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2017 : REV A : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 2699 : 2017 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 6750 : 2006 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 6750 : 2014 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure(0.4 % Fuel Sulfur) and 1N Procedure(0.04 % Fuel Sulfur)
    ASTM D 4485 : 2003 Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2008 Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2015 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4485 : 2005 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2008 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2020 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 6750 : 2016 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 1319 : 2014 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4175 : 2017 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2009 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2011 : REV A Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 6557 : 2004 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 3338 : 2000 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM D 3338 : 2004 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    ASTM D 2699 : 1992 Standard Test Method for Knock Characteristics of Motor Fuels by the Research Method
    ASTM D 240 : 1992 : R1997 : EDT 2 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
    ASTM D 6750 : 2019 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 3237 : 2006 : EDT 1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    ASTM D 1319 : 1999 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4485 : 2018 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4175 : 2009 : REV A : EDT 4 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 6557 : 2000 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 4175 : 2009 : REV A : EDT 3 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2699 : 2001 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 235 : 2022 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
    ASTM D 2699 : 2003 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 6750 : 2018 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4485 : 2011 : REV B Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4485 : 2016 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4175 : 2018 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2007 Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2010 Standard Specification for Performance of Engine Oils
    ASTM D 2699 : 2009 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4485 : 2001 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2001 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2020 : REV B : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 1319 : 2002 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6750 : 2005 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4175 : 2001 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2005 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 6557 : 2010 : REV A Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 2699 : 2012 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 3231 : 2018 Standard Test Method for Phosphorus in Gasoline
    ASTM D 4175 : 2002 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 3237 : 2002 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
    ASTM D 6750 : 2013 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4485 : 2004 Standard Specification for Performance of Engine Oils
    ASTM D 2699 : 2016 : EDT 1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
    ASTM D 3231 : 2002 Standard Test Method for Phosphorus in Gasoline
    ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2699 : 2011 : EDT 1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2015 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2000 Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2002 : REV A : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2699 : 2012 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 2699 : 2008 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 1319 : 2003 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6557 : 2008 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 6750 : 2015 : REV A Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4485 : 2015 : REV A Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 6557 : 2013 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 2699 : 2019 : EDT 1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 1319 : 2010 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4175 : 2009 : REV A : EDT 5 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2016 : REV C Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2015 : REV B Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2699 : 2003 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 6750 : 2010 : REV A Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 2699 : 2018 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2015 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2006 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4175 : 2009 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2016 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2002 : REV A : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2008 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2699 : 2007 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2002 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4175 : 2000 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2016 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 3237 : 2006 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 2699 : 2004 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 2699 : 2015 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 235 : 2002 : R2012 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021)
    ASTM D 2699 : 2013 : REV B Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2019 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2018 : REV A Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4485 : 2005 Standard Specification for Performance of Engine Oils
    ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2699 : 2001 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 6750 : 2009 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 2699 : 2006 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
    ASTM D 2699 : 2021 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4485 : 2014 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 2699 : 2015 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 6557 : 2009 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 4485 : 2002 Standard Specification for Performance of Engine Oils
    ASTM D 6557 : 2018 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 4175 : 2017 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2005 : EDT 1 Standard Specification for Performance of Engine Oils
    ASTM D 6750 : 2015 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 2699 : 2002 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2009 : REV A : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
    ASTM D 3231 : 2007 Standard Test Method for Phosphorus in Gasoline
    ASTM D 3237 : 2017 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    ASTM D 4175 : 2018 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2016 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 1319 : 2015 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2699 : 2009 : EDT 1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 2699 : 2004 : EDT 1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 2699 : 2006 : REV A Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 3237 : 1997 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
    ASTM D 1319 : 2013 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 6750 : 2010 : REV B Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 6557 : 2003 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 3338 : 2005 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    ASTM D 3231 : 1989 Standard Test Method for Phosphorus in Gasoline
    ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 6750 : 2005 : REV A Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 6750 : 2008 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 2699 : 2018 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4175 : 2017 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 6557 : 2010 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    ASTM D 4175 : 2019 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 3338 : 2008 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    ASTM D 3338 : 1995 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    ASTM D 2699 : 2013 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4485 : 2009 Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2019 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 6750 : 2010 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 6750 : 2002 Standard Test Methods for Evaluation of Engine Oils in A High-Speed, Single-Cylinder Diesel Engine -1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4175 : 2015 : REV B : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 6750 : 2004 Standard Test Methods for Evaluation of Engine Oils in A High-Speed, Single-Cylinder Diesel Engine -1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    ASTM D 4485 : 2010 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2011 Standard Specification for Performance of Engine Oils
    ASTM D 2699 : 2010 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 3231 : 2011 Standard Test Method for Phosphorus in Gasoline
    ASTM D 3237 : 2012 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
    ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 2699 : 2019 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 1319 : 2002 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4175 : 2008 : REV B Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2007 : REV A Standard Specification for Performance of Engine Oils
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective