ASTM D 823 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
Available format(s)
Hardcopy , PDF
Superseded date
07-07-2022
Superseded by
Language(s)
English
Published date
15-03-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.1.1 Five practices are given for preparing films of uniform thickness of coatings on test panels.
| Committee |
D 01
|
| DocumentType |
Standard Practice
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1Five practices are given for preparing films of uniform thickness of coatings on test panels. These practices are:
Practice A—Automated Spray Machine Application
Practice B—Motor-Driven Dip Coater Application
Practice C—Motor-Driven Blade Film Application
Practice D—Hand-Held Spray Gun Application
Practice E—Hand-Held Blade Film Application
1.2The use of wire-wound drawdown bars as described in Practice D4147 may also be an appropriate method for producing films of uniform coating thickness.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM D 4585/D4585M : 2018 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 6905 : 2020 | Standard Practice for Impact Flexibility of Organic Coatings |
| ASTM D 2134 : 2019 | Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
| ASTM D 7187 : 2020 | Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching |
| ASTM D 2803 : 2009 : R2020 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 2091 : 1996 : R2017 | Standard Test Method for Print Resistance of Lacquers |
| ASTM D 6279 : 2020 | Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 5531 : 2017 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 7786 : 2013 : R2019 | Standard Test Method for Determining Enamel Holdout |
| ASTM D 2197 : 2016 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 6490 : 1999 : R2014 | Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
| ASTM D 1735 : 2021 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 3964 : 2010 : R2020 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4708 : 2019 | Standard Practice for Preparation of Uniform Free Films of Organic Coatings |
| ASTM D 7306 : 2007 : R2017 | Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation |
| ASTM D 3105 : 2017 | Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
| ASTM D 7091 : 2022 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM E 1795 : 2020 : REV A | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 522/D522M : 2017 : R2021 | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 6132 : 2013 : R2017 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
| ASTM D 2247 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 5724 : 2016 : R2021 | Standard Specification for Gouache Paints |
| ASTM D 2454 : 2018 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM D 7514 : 2014 | Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
| ASTM D 3260 : 2001 : R2017 | Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
| ASTM D 2370 : 2016 : R2021 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 6486 : 2001 : R2017 | Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM D 5895 : 2020 | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 7377 : 2009 : R2018 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet |
| ASTM D 8367 : 2021 | Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles |
| ASTM D 1474/D1474M : 2013 : R2018 | Standard Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 2485 : 2018 | Standard Test Methods for Evaluating Coatings For High Temperature Service |
| ASTM D 333 : 2001 : R2021 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 4060 : 2019 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 1653 : 2013 : R2021 | Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
| ASTM E 1797 : 2012 : R2017 : EDT 1 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 5031/D5031M : 2013 : R2018 | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 3170/D3170M : 2014 | Standard Test Method for Chipping Resistance of Coatings |
| ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 6675 : 2001 : R2015 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM D 7538 : 2009 : R2018 | Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device |
| ASTM D 3361/D3361M : 2022 | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM D 4138 : 2007 : REV A : R2017 | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 6189 : 1997 : R2014 | Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 711 : 2020 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
| ASTM D 968 : 2017 | Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
| ASTM D 6695 : 2016 | Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
| ASTM D 822/D822M : 2013 : R2018 | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 5178 : 2021 | Standard Test Method for Mar Resistance of Organic Coatings |
| ASTM D 4366 : 2016 : R2021 | Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests |
| ASTM D 870 : 2015 : R2020 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 6037 : 2021 | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 2794 : 1993 : R2019 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM D 523 : 2014 : R2018 | Standard Test Method for Specular Gloss |
| ASTM D 5767 : 2018 | Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces |
| ASTM D 4039 : 2009 : R2015 | Standard Test Method for Reflection Haze of High-Gloss Surfaces |
| ASTM D 4141/D4141M : 2022 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 3468/D3468M : 1999 : R2020 | Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
| ASTM D 6577 : 2015 : R2019 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 8163 : 2018 | Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings |
| ASTM D 1212 : 1991 : R2013 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 1005 : 1995 : R2020 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4414 : 1995 : R2020 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 3924 : 2016 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 7091 : 2022 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 1212 : 1991 : R2007 : EDT 1 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 1212 : 1991 : R2020 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 4147 : 1999 : R2013 | Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar |
| ASTM D 4147 : 2018 | Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars |
| ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM D 1005 : 1995 : R2001 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4147 : 1999 : R2007 : EDT 1 | Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar |
| ASTM D 7091 : 2020 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 3924 : 1980 : R2011 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 4414 : 1995 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 3924 : 1980 : R2005 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 4147 : 1999 : R2003 | Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar |
| ASTM D 1212 : 1991 : R2001 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 1005 : 1995 : R2013 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4285 : 1983 : R2006 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM D 7091 : 2013 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 1212 : 1991 : R1996 : EDT 1 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 4285 : 1983 : R2012 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM D 4285 : 1983 : R1999 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| ASTM D 4414 : 1995 : R2007 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 7091 : 2021 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 7091 : 2012 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 1212 : 1991 : R2007 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 3924 : 1980 : R1996 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
| ASTM D 7091 : 2005 | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 1005 : 1995 : R2007 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 4414 : 1995 : R2013 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 1212 : 1991 | Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 4414 : 1995 : R2001 | Standard Practice for Measurement of Wet Film Thickness by Notch Gages |
| ASTM D 4147 : 1999 | Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar |
| ASTM D 1005 : 1995 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 3924 : 2016 : R2019 | Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.