![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 122 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
Hardcopy , PDF
29-04-2022
English
10-04-2017
This practice covers simple methods for calculating how many units to include in a random sample in order to estimate with a specified precision, a measure of quality for all the units of a lot of material, or produced by a process.
Committee |
E 11
|
DocumentType |
Standard Practice
|
Pages |
5
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers simple methods for calculating how many units to include in a random sample in order to estimate with a specified precision, a measure of quality for all the units of a lot of material, or produced by a process. This practice will clearly indicate the sample size required to estimate the average value of some property or the fraction of nonconforming items produced by a production process during the time interval covered by the random sample. If the process is not in a state of statistical control, the result will not have predictive value for immediate (future) production. The practice treats the common situation where the sampling units can be considered to exhibit a single (overall) source of variability; it does not treat multi-level sources of variability.
1.2The system of units for this standard is not specified. Dimensional quantities in the standard are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 510/F510M : 2020 | Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method |
ASTM D 3332 : 1999 : R2016 | Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines |
ASTM D 3987 : 2012 : R2020 | Standard Practice for Shake Extraction of Solid Waste with Water |
ASTM D 4687 : 2014 | Standard Guide for General Planning of Waste Sampling |
ASTM D 4678 : 2015 : REV A : R2019 | Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials |
ASTM D 3479/D3479M : 2019 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
ASTM D 5607 : 2016 | Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force |
ASTM C 50/C50M : 2013 : R2019 | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
ASTM D 3580 : 1995 : R2015 | Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products |
ASTM D 5363 : 2016 | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
ASTM E 2548 : 2016 | Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis |
ASTM D 8387/D8387M : 2021 | Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates |
ASTM D 7070 : 2016 | Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature |
ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
ASTM D 6344 : 2004 : R2017 | Standard Test Method for Concentrated Impacts to Transport Packages |
ASTM D 5112 : 1998 : R2015 | Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products |
ASTM D 3816/D3816M : 1996 : R2020 | Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes |
ASTM E 956 : 1983 : R2015 | Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) |
ASTM C 273/C273M : 2020 | Standard Test Method for Shear Properties of Sandwich Core Materials |
ASTM D 5375/D5375M : 1998 : R2019 | Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
ASTM F 564 : 2017 | Standard Specification and Test Methods for Metallic Bone Staples |
ASTM E 648 : 2019 : REV A : EDT 1 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source |
ASTM D 6295/D6295M : 1998 : R2019 | Standard Test Method for Dispensability of Light–Duty Pressure–Sensitive Film Tape (Withdrawn 2023) |
ASTM F 1428 : 1992 : R2017 | Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
ASTM C 363/C363M : 2016 | Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
ASTM D 6641/D6641M : 2016 : EDT 2 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
ASTM D 3759/D3759M : 2005 : R2019 | Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape |
ASTM D 7264/D7264M : 2021 | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
ASTM G 211 : 2014 : R2020 | Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets |
ASTM D 6653/D6653M : 2013 : R2021 | Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method |
ASTM D 5449/D5449M : 2016 | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 2176 : 2016 : R2021 | Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester |
ASTM D 8337/D8337M : 2021 | Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test |
ASTM D 5571 : 2016 | Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
ASTM F 384 : 2017 | Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
ASTM D 7565/D7565M : 2010 : R2017 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
ASTM D 5731 : 2016 | Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications |
ASTM G 176 : 2003 : R2017 | Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method |
ASTM D 3813/D3813M : 1998 : R2020 | Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes |
ASTM D 1596 : 2014 : R2021 | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
ASTM D 3434 : 2000 : R2018 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
ASTM D 6772/D6772M : 2016 | Standard Test Method for Dimensional Stability of Sandwich Core Materials |
ASTM D 6654 : 2018 | Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser |
ASTM D 6719 : 2022 | Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering |
ASTM D 7291/D7291M : 2015 | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
ASTM D 5823 : 2019 | Standard Test Method for Tuft Height of Pile Floor Coverings |
ASTM B 539 : 2020 | Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) |
ASTM D 5264 : 1998 : R2019 | Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester |
ASTM D 6633 : 2018 | Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser |
ASTM C 394/C394M : 2016 | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
ASTM D 1060 : 2010 : R2018 | Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present |
ASTM D 880 : 1992 : R2021 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
ASTM D 8268 : 2019 | Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber |
ASTM D 3652/D3652M : 2001 : R2020 | Standard Test Method for Thickness of Pressure-Sensitive Tapes |
ASTM F 2559/F2559M : 2021 | Standard Guide for Writing a Specification for Sterilizable Peel Pouches |
ASTM D 6264/D6264M : 2017 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
ASTM F 382 : 2017 | Standard Specification and Test Method for Metallic Bone Plates |
ASTM D 5793 : 2018 | Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings |
ASTM D 5277 : 1992 : R2015 | Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester |
ASTM B 942 : 2021 | Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations |
ASTM F 2232 : 2014 : R2020 | Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear |
ASTM D 5748 : 1995 : R2019 | Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM D 4506 : 2021 | Standard Test Method for Determining In Situ Modulus of Deformation of a Rock Mass Using the Radial Jacking Test |
ASTM D 6859 : 2018 | Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings |
ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
ASTM C 393/C393M : 2020 | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
ASTM D 7030 : 2004 : R2017 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 1402 : 2013 : R2018 | Standard Guide for Sampling Design |
ASTM D 7956/D7956M : 2016 | Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
ASTM D 7522/D7522M : 2021 | Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates |
ASTM D 3528 : 1996 : R2016 | Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM D 5458 : 1995 : R2020 | Standard Test Method for Peel Cling of Stretch Wrap Film |
ASTM D4003:1998(R2019)e1 | Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems<br> |
ASTM D 828 : 2016 : EDT 1 | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
ASTM D 1006/D1006M : 2021 | Standard Practice for Conducting Exterior Exposure Tests of Hand and Factory Applied Paints on Wood and Wood Composite Materials |
ASTM C 1425 : 2019 | Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
ASTM F 1541 : 2017 | Standard Specification and Test Methods for External Skeletal Fixation Devices |
ASTM D 5276 : 2019 | Standard Test Method for Drop Test of Loaded Containers by Free Fall |
ASTM D 5639/D5639M : 2020 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
ASTM C 364/C364M : 2016 | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
ASTM D 3833/D3833M : 1996 : R2019 | Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes |
ASTM F 1702 : 2010 : R2018 | Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus |
ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
ASTM E 2655 : 2014 : R2020 | Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
ASTM C 1869 : 2018 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
ASTM D 6252/D6252M : 1998 : R2019 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle |
ASTM D 3410/D3410M : 2016 : EDT 1 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
ASTM D 779 : 2016 | Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method |
ASTM F 1089 : 2018 | Standard Test Method for Corrosion of Surgical Instruments |
ASTM D 5450/D5450M : 2016 | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM E 382 : 2020 | Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets and Direct-Reduced Iron |
ASTM C 366/C366M : 2016 | Standard Test Methods for Measurement of Thickness of Sandwich Cores |
ASTM D 4611 : 2016 | Standard Test Method for Specific Heat of Rock and Soil |
ASTM G 115 : 2010 : R2018 | Standard Guide for Measuring and Reporting Friction Coefficients |
ASTM D 5335 : 2014 | Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023) |
ASTM C 1045 : 2019 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 1773 : 2021 | Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
ASTM C 1341 : 2013 : R2018 | Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites |
ASTM D 5961/D5961M : 2017 | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
ASTM D 2442 : 1975 : R2020 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
ASTM D 7617/D7617M : 2011 : R2017 | Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
ASTM C 365/C365M : 2016 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
ASTM C 613 : 2019 | Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
ASTM D 5265 : 2009 : R2016 | Standard Test Method for Bridge Impact Testing |
ASTM D 6804 : 2019 | Standard Guide for Hand Hole Design in Corrugated Boxes |
ASTM D 7336/D7336M : 2016 | Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
ASTM D 6115 : 1997 : R2019 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 7078/D7078M : 2020 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
ASTM D 6790/D6790M : 2016 | Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
ASTM D 3889/D3889M : 1996 : R2020 | Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature |
ASTM D 5848 : 2020 | Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings |
ASTM C 429 : 2021 | Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
ASTM F 3014 : 2014 | Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures (Withdrawn 2023) |
ASTM E 701 : 1980 : R2018 | Standard Test Methods for Municipal Ferrous Scrap |
ASTM G 137 : 1997 : R2017 | Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration |
ASTM D 7248/D7248M : 2021 | Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
ASTM B 579 : 1973 : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM F 1015 : 2021 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM E 970 : 2017 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
ASTM D 5459 : 1995 : R2020 | Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film |
ASTM D 5528/D5528M : 2021 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 2936 : 2020 | Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens |
ASTM C 297/C297M : 2016 | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM D 7136/D7136M : 2020 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
ASTM C 92 : 1995 : R2022 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM D 8336 : 2021 | Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure |
ASTM D 1975 : 2016 | Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails |
ASTM C 1470 : 2020 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM F 3143 : 2020 | Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator |
ASTM G 105 : 2020 | Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests |
ASTM D 6544 : 2021 | Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing |
ASTM F 1499 : 2017 | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
ASTM F 355 : 2016 : EDT 1 | Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play |
ASTM D 7205/D7205M : 2021 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
ASTM D 7914/D7914M : 2021 | Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
ASTM D 3330/D3330M : 2004 : R2018 | Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
ASTM C 271/C271M : 2016 | Standard Test Method for Density of Sandwich Core Materials |
ASTM D 3039/D3039M : 2017 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
ASTM D 7249/D7249M : 2020 | Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure |
ASTM F 2502 : 2017 | Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
ASTM D 979/D979M : 2015 | Standard Practice for Sampling Bituminous Paving Mixtures |
ASTM E 1432 : 2019 | Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of<brk/> Intermediate Size |
ASTM D 7430/D7430M : 2021 | Standard Practice for Mechanical Sampling of Coal |
ASTM F 543 : 2017 | Standard Specification and Test Methods for Metallic Medical Bone Screws |
ASTM G 77 : 2017 | Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test |
ASTM D 2221 : 2001 : R2021 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM D 5379/D5379M : 2019 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
ASTM C 1469 : 2022 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
ASTM D 7137/D7137M : 2017 | Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
ASTM G 132 : 1996 : R2018 | Standard Test Method for Pin Abrasion Testing |
ASTM E 703 : 2020 | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM D 4535 : 2021 | Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer |
ASTM E 141 : 2010 : R2018 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
ASTM C 1532/C1532M : 2021 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
ASTM D 642 : 2020 | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
ASTM C 1292 : 2022 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM D 6873/D6873M : 2019 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
ASTM C 480/C480M : 2016 | Standard Test Method for Flexure Creep of Sandwich Constructions |
ASTM D 5448/D5448M : 2016 | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 8131/D8131M : 2017 : EDT 1 | Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
ASTM D 7905/D7905M : 2019 : EDT 1 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 2344/D2344M : 2016 | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 2661 : 2021 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
ASTM E 566 : 2019 | Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals |
ASTM D 4255/D4255M : 2020 | Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
ASTM F 3036 : 2021 | Standard Guide for Testing Absorbable Stents |
ASTM D 5233 : 1992 : R2017 | Standard Test Method for Single Batch Extraction Method for Wastes |
ASTM D 7615/D7615M : 2019 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
ASTM D 75/D75M : 2019 | Standard Practice for Sampling Aggregates |
ASTM E 2935 : 2021 | Standard Practice for Evaluating Equivalence of Two Testing Processes |
ASTM D 5651 : 2021 | Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials |
ASTM D 6671/D6671M : 2022 | Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
ASTM D 3654/D3654M : 2006 : R2019 | Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes |
ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
ASTM D 5487 : 2016 | Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
ASTM D 7012 : 2014 : EDT 1 | Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures |
ASTM F 1645/F1645M : 2016 | Standard Test Method for Water Migration in Honeycomb Core Materials |
ASTM F 2193 : 2020 | Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
ASTM D 7332/D7332M : 2016 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite |
ASTM D 7616/D7616M : 2011 : R2017 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
ASTM G 143 : 2003 : R2018 | Standard Test Method for Measurement of Web/Roller Friction Characteristics |
ASTM D 7250/D7250M : 2020 | Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
ASTM D 6484/D6484M : 2020 | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
ASTM D 4577 : 2019 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
ASTM G 65 : 2016 : R2021 | Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus |
ASTM D 999 : 2008 : R2015 | Standard Test Methods for Vibration Testing of Shipping Containers |
ASTM D 2940/D2940M : 2020 | Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports |
ASTM D 8132/D8132M : 2017 | Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement |
ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
ASTM E 2629 : 2020 | Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems |
ASTM F 3207 : 2017 | Standard Guide for <emph type="bdit">in vivo</emph> Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model |
ASTM G 76 : 2018 | Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets |
ASTM D 6856/D6856M : 2003 : R2016 | Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.