ASTM E 1331 : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
29-07-2015
English
01-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.01, 2017 Specifies the instrumental measurement of the reflection properties and color of object-color specimens by using a spectrophotometer or spectrocolorimeter with a hemispherical optical measuring system, such as an integrating sphere.
| Committee |
E 12
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
1.1This test method describes the instrumental measurement of the reflection properties and color of object-color specimens by the use of a spectrophotometer or spectrocolorimeter with a hemispherical optical measuring system, such as an integrating sphere.
1.2The test method is suitable for use with most object-color specimens. However, it should not be used for retroreflective specimens or for fluorescent specimens when highest accuracy is desired. Specimens having intermediate-gloss surfaces should preferably not be measured by use of this geometry.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| ASTM D 2805 : 2011 : R2018 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM E 1477 : 1998 : REV A | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM D 8163 : 2017 | Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings |
| ASTM D 5382 : 2002 : R2013 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM C 1650 : 2014 : REDLINE | Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated |
| ASTM E 1477 : 1998 : REV A : R2017 : EDT 1 | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM D 6131 : 2017 : REDLINE | Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments |
| ASTM C 1510 : 2001 : R2016 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM D 6441 : 2005 | Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
| ASTM E 1477 : 1998 : REV A : R2003 | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| MIL-PRF-32348 Base Document:2010 | POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
| ASTM D 3424 : 2011 : REDLINE | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
| ASTM C 1510 :2001 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM D 5326 : 1994 : REV A : R2013 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 6441 : 2005 : R2016 | Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
| ASTM E 805 : 2012 : REV A : R2017 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM E 805 :2012 | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM E 2387 : 2005 : R2011 | Standard Practice for Goniometric Optical Scatter Measurements |
| ASTM D 7990 : 2015 | Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| ASTM E 805 : 2012 : REV A | Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials |
| ASTM D 3134 : 2015 : REDLINE | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 2066 : 2007 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
| ASTM E 1477 : 1998 : REV A : R2013 | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM D 2805 : 2011 | Standard Test Method for Hiding Power of Paints by Reflectometry |
| ASTM D 5326 : 1994 : REV A : R2009 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 5382 : 2002 : R2017 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM E 2387 : 2005 | Standard Practice for Goniometric Optical Scatter Measurements |
| ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6441 : 2005 : R2010 | Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
| ASTM E 1477 : 1998 : REV A : R2008 | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM E 2387 : 2 | PRACTICE FOR GONIOMETRIC OPTICAL SCATTER MEASUREMENTS |
| ASTM D 5531 : 2017 : REDLINE | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 1247 : 2012 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 5382 : 2002 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM E 3125 : 2017 | Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range |
| ASTM D 2066 : 2007 : R2012 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
| ASTM D 6531 : 2000 | Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
| ASTM E 2938 : 2015 | Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| ASTM C 1510 : 2001 : R2007 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM E 179 : 2017 : REDLINE | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| ASTM D 5382 : 2002 : R2007 | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM C 1510 : 2001 : R2012 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM D 5326 : 1994 : REV A | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM D 5326 : 1994 : REV A : R2002 | Standard Test Method for Color Development in Tinted Latex Paints |
| ASTM E 1247 : 2012 : R2017 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM E 1477 : 1998 : REV A : R2017 | Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6531 : 2000 : R2005 | Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 991 : 2016 : REDLINE | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM E 179 : 2017 : REDLINE | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.