ASTM E 2251 : 2014 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
Available format(s)
PDF
Language(s)
English
Published date
01-05-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 14.03, 2015 Describes liquid-in-glass ASTM thermometers with low hazard thermometric liquids.
| Committee |
E 20
|
| DocumentType |
Redline
|
| Pages |
22
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1The purpose of this standard is to specify liquid-in-glass ASTM thermometers using low hazard thermometric liquids defined in this standard.
1.2This standard specifies liquid-in-glass thermometers graduated in degrees Celsius or degrees Fahrenheit that are frequently identified and used in methods under the jurisdiction of the various technical committees within ASTM. The current approved thermometers are listed in Table 1.
1.3The technical requirements for the thermometric liquids used in the thermometers in Table 1 are specified in Annex A1. Tests for conformity to the technical requirements are also found in Annex A1.
Note 1:It has been found by experience that ASTM Thermometers, although developed in general for specific tests, may also be found suitable for other applications, thus precluding the need for new thermometer specifications differing in only minor features. However, it is suggested that technical committees contact E20.05 before choosing a currently designated thermometer for a new method to be sure the thermometer will be suitable for the intended application.
1.4For full rationale, see Appendix X1.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| ASTM D 7577 : 2012 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| AASHTO T 185 : 2011 | METHOD OF TEST FOR EARLY STIFFENING OF HYDRAULIC CEMENT (MORTAR METHOD) |
| ASTM D 5346 : 2017 : REDLINE | Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds |
| AASHTO T 215 : 2014(R2018) | METHOD OF TEST FOR PERMEABILITY OF GRANULAR SOILS (CONSTANT HEAD) |
| ASTM F 390 : 2011 : REDLINE | Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array |
| ASTM D 972 : 2016 : REDLINE | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM E 100 : 2017 : REDLINE | SPECIFICATION FOR ASTM HYDROMETERS |
| ASTM D 648 : 2016 | Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D 4532 : 2015 : REDLINE | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| ASTM D 1755 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) Resins |
| ASTM E 644 : 2011 : REDLINE | Standard Test Methods for Testing Industrial Resistance Thermometers |
| ASTM D 61 : 2015 : REDLINE | Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) |
| ASTM D 6288 : 2017 : REDLINE | Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
| ASTM D 1074 : 2017 : REDLINE | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM D 7263 : 2009 : R2018 : EDT 1 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 6784 : 2016 : REDLINE | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
| ASTM D 6371 : 2017-06 | TEST METHOD FOR COLD FILTER PLUGGING POINT OF DIESEL AND HEATING FUELS |
| ASTM D 4130 : 2015 : REDLINE | Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines |
| ASTM D 721 : 2017 : REDLINE | Standard Test Method for Oil Content of Petroleum Waxes |
| ASTM F 820 : 2017-10 | TEST METHOD FOR MEASURING AIR PERFORMANCE CHARACTERISTICS OF CENTRAL VACUUM CLEANING SYSTEMS |
| ASTM D 3195/D3195M : 2010 | Standard Practice for Rotameter Calibration |
| ASTM D 5869 : 2007 : REV A | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| ASTM D 5438 : 2017 : REDLINE | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM D 3685/D3685M : 2013 : REDLINE | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ASTM D 6926 : 2016 : REDLINE | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
| ASTM D 1125 : 2014 : REDLINE | Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023) |
| ASTM D 8055 : 2017 | Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards |
| ASTM D 7263 : 2009 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM D 2111 : 2010 | Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures |
| ASTM D 6925 : 2015 : REDLINE | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM D 8175 : 2018 | Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester |
| I.S. EN ISO 6246:2017 | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
| BS EN ISO 6246:1998 | Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ASTM C 782 : 2013 : R2018 | Standard Test Method for Softness of Preformed Tape Sealants |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| ASTM D 5869 : 2007 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| API MPM CH7.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT |
| ASTM D 3941 : 2015-02 | TEST METHOD FOR FLASH POINT BY THE EQUILIBRIUM METHOD WITH A CLOSED-CUP APPARATUS |
| 18/30358441 DC : DRAFT APR 2018 | BS EN ISO 3016 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF POUR POINT |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 4878 : 2015 : REDLINE | Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols |
| ASTM D 3603 : 2015-02 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF STEAM TURBINE OIL IN THE PRESENCE OF WATER (HORIZONTAL DISK METHOD) |
| ASTM D 2746 : 2007 | Standard Test Method for Staining Tendency of Asphalt (Stain Index) |
| ASTM C 403/C403M : 2016 : REDLINE | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| ASTM G 42 : 2011 : REDLINE | TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES |
| ASTM D 1075 : 2011 : REDLINE | TEST METHOD FOR EFFECT OF WATER ON COMPRESSIVE STRENGTH OF COMPACTED BITUMINOUS MIXTURES |
| ASTM F 483 : 2009 | Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals |
| ASTM D 914 : 2012 : REDLINE | Standard Test Methods for Ethylcellulose |
| I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
| ASTM D 5801 : 2017 : REDLINE | Standard Test Method for Toughness and Tenacity of Asphalt Materials |
| AASHTO T 197M/T 197 : 1900 | METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
| ASTM D 1045 : 2014 : REDLINE | Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| ASTM D 1310 : 2014 : REDLINE | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
| ASTM D 5440 : 2017 : REDLINE | Standard Test Method for Determining the Melting Point of Fats and Oils |
| ASTM D 4350 : 2016 : REDLINE | Standard Test Method for Corrosivity Index of Plastics and Fillers |
| ASTM D 5298 : 2016 : REDLINE | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM D 2746 : 2007 : R2013 | Standard Test Method for Staining Tendency of Asphalt (Stain Index) |
| ASTM D 6331 : 2016 : REDLINE | Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| ASTM D 4361 : 2010 : REDLINE | TEST METHOD FOR DETERMINING LOGARITHMIC VISCOSITY NUMBER OF POLY (VINYL CHLORIDE) (PVC) IN FORMULATED COMPOUNDS |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| 18/30358429 DC : DRAFT APR 2018 | BS EN ISO 3015 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF CLOUD POINT |
| ASTM D 1429 : 2013 : REDLINE | Standard Test Methods for Specific Gravity of Water and Brine |
| ASTM D 2914 : 2015 : REDLINE | Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
| AASHTO T 100 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
| ASTM D 3082 : 2015 : REDLINE | Standard Test Method for Boron in Water |
| ASTM D 5015 : 2015 : REDLINE | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM D 6927 : 2015 : REDLINE | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
| ASTM D 4669:2007 | Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols |
| ASTM D 1243 : 2015 : REDLINE | Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
| ASTM D 5006 :2011 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM D 2111 : 2010 : R2015 | Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures |
| ASTM D 3642 : 2013 : REDLINE | Standard Test Method for Softening Point of Certain Alkali-Soluble Resins |
| UNE-EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| ASTM D 7577 : 2012 : R2016 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
| ASTM D 2251 : 2010 | Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures |
| 16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| ASTM D 5865 : 2013 : REDLINE | TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE |
| ASTM D 1795 : 2013 : REDLINE | Standard Test Method for Intrinsic Viscosity of Cellulose |
| ASTM D 4957 : 2018 | Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 7263 : 2009 : R2018 | Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens |
| ASTM C 782 : 2013 | Standard Test Method for Softness of Preformed Tape Sealants |
| ASTM D 8164 : 2018 | Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing |
| ASTM D 5006 : 2011 : R2016 | Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels |
| ASTM D 6539 : 2013 : REDLINE | Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air |
| ASTM D 4669 : 2007 : R2013 : EDT 1 | Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols |
| ASTM D 6209 : 2013 : REDLINE | Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ASTM F 483 : 2009 : R2014 | Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals |
| ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| ASTM D 1525 : 2017 | Standard Test Method for Vicat Softening Temperature of Plastics |
| ASTM D 2913 : 2014 : REDLINE | Standard Test Method for Mercaptan Content of the Atmosphere |
| DIN EN ISO 6246:2016-04 (Draft) | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
| ASTM D 4943 : 2008-07 | TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY THE WAX METHOD |
| ASTM D 5869 : 2007 : REV A : R2013 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| ASTM D 2251 : 2010 : R2015 | Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures |
| ASTM D 4659 : 2014 : REDLINE | TEST METHODS FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF SPECIFIC GRAVITY OF ISOCYANATES |
| AASHTO T 59 : 2015 | METHOD OF TEST FOR EMULSIFIED ASPHALTS |
| ASTM D 6084/D6084M : 2013-12 | TEST METHOD FOR ELASTIC RECOVERY OF ASPHALT MATERIALS BY DUCTILOMETER |
| ASTM D 3154 : 2014 : REDLINE | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM D 3195/D3195M : 2010 : R2015 | Standard Practice for Rotameter Calibration |
| ASTM D 4889 : 2015 : REDLINE | Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates |
| ASTM D 6572 : 2014-02 | TEST METHODS FOR DETERMINING DISPERSIVE CHARACTERISTICS OF CLAYEY SOILS BY THE CRUMB TEST |
| ASTM D 1608 : 2016 : REDLINE | Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) |
| ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| ASTM D 4361 : 2010 : REDLINE | TEST METHOD FOR DETERMINING LOGARITHMIC VISCOSITY NUMBER OF POLY (VINYL CHLORIDE) (PVC) IN FORMULATED COMPOUNDS |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM E 344 : 2016-12 | TERMINOLOGY RELATING TO THERMOMETRY AND HYDROMETRY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.