![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 230 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
Hardcopy , PDF
11-11-2014
English
23-09-2003
CONTAINED IN VOL. 14.03, 2009 Gives reference tables for temperature electro-motive force relationships for various industrial thermocouples commonly used in industry.
Committee |
E 20
|
DocumentType |
Standard
|
Pages |
189
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This specification contains reference tables (Tables 8-23) that give temperature-electromotive force (emf) relationships for Types B, E, J, K, N, R, S, and T thermocouples. These are the thermocouple types most commonly used in industry.
1.2 Also included are lists of standard and special tolerances on initial values of emf versus temperature for thermocouples (Table 1), thermocouple extension wires (Table 2), and compensating extension wires for thermocouples (Table 3).
1.3 Tables 4-5, included herein, give data on insulation color coding for thermocouple and thermocouple extension wires as customarily used in the United States.
1.4 Recommendations regarding upper temperature limits for the thermocouple types referred to in 1.1 are given in Table 6.
1.5 Tables 24-43 give temperature-emf data for single-leg thermoelements referenced to platinum (NIST Pt 67). The tables include values for Types BP, BN, JP, JN, KP (same as EP), KN, NP, NN, TP, and TN (same as EN).
1.6 Tables for Types RP, RN, SP, and SN thermoelements are not included since, nominally, Tables 18-21 represent the thermoelectric properties of Type RP and SP thermoelements referenced to pure platinum.
1.7 Polynomial coefficients that may be used for computation of thermocouple emf as a function of temperature are given in Table 7. Coefficients for the emf of each thermocouple pair as well as for the emf of individual thermoelements versus platinum are included.
1.8 Coefficients for sets of inverse polynomials are given in Table 44. These may be used for computing a close approximation of temperature (oC) as a function of thermocouple emf. Inverse functions are provided only for thermocouple pairs and are valid only over the emf ranges specified.
1.9 This specification is intended to define the thermoelectric properties of materials that conform to the relationships presented in the tables of this standard and bear the letter designations contained herein. Topics such as ordering information, physical and mechanical properties, workmanship, testing, and marking are not addressed in this specification. The user is referred to specific standards such as Specifications E235, E574, E585, E608, E1159, or E1223, as appropriate, for guidance in these areas.
1.10 The temperature-emf data in this specification are intended for industrial and laboratory use.
ASTM D 8040 : 2017 | Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware |
ASTM D 7873 : 2013 : EDT 2 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
ISO 13573:2012 | Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials |
ASTM C 1033 : 1985 : R1994 : EDT 1 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically |
13/30259829 DC : 0 | BS ISO 17245 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR HIGH-TEMPERATURE CORROSION TESTING OF METALLIC MATERIALS BY IMMERSING IN MOLTEN SALT OR OTHER LIQUIDS UNDER STATIC CONDITIONS |
BS ISO 17248:2015 | Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids |
ASTM D 6200 : 2001 : R2007 | Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
API MPM CH19.3A : 1997 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART A - WIND TUNNEL TEST METHOD FOR THE MEASUREMENT OF DECK-FITTING LOSS FACTORS FOR EXTERNAL FLOATING-ROOF TANKS |
ASTM C 335 : 2005 : REV A | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
ASTM D 3711 : 1995 : R2005 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
ISA 67.06.01 : 2002 | PERFORMANCE MONITORING FOR NUCLEAR SAFETY-RELATED INSTRUMENT CHANNELS IN NUCLEAR POWER PLANTS |
FM 3600 : 2018 | ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
ASTM C 372 : 1994 : R2007 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
ASTM E 1159 : 2015 : REDLINE | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
ASTM D 7820 : 2012 | Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel |
ASTM D 7646 : 2010 | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis |
ASTM A 991/A991M : 2017 : REDLINE | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products |
ASTM E 235/E235M : 2012 : R2018 | Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications |
ASTM D 6200 : 2001 | Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
ASTM C 1003 : 1983 : R1992 : EDT 1 | Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box (Withdrawn 1997) |
ASTM C 1033 : 1985 : R2000 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically (Withdrawn 2003) |
ASTM D 5869 : 2007 : REV A | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM E 207 : 2008 : R2015 : EDT 1 | Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties |
ASTM C 210 : 1995 : R2014 | Standard Test Method for Reheat Change of Insulating Firebrick |
ASTM D 6891 : 2015 : REDLINE | Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine |
ASTM C 1465 : 2008 : R2013 : EDT 1 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
ASTM D 3711 : 1995 : R2009 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (Withdrawn 2016) |
ASTM D 3711 : 1995 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
ASTM C 835 : 2006 : R2013 : EDT 1 | Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C |
ASTM C 335 : 2005 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
ASTM C 1774 : 2013 | Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems |
ASTM C 1465 : 2008 : R2013 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
MIL-DTL-25446 Revision F:2022 | Transmitter, Temperature, Electrical Resistance, Armored, Bayonet Locking Type, (-50 Degrees C to 300 Degrees C) |
ASTM E 585/E585M : 2012-06 | SPECIFICATION FOR COMPACTED MINERAL-INSULATED, METAL-SHEATHED, BASE METAL THERMOCOUPLE CABLE |
ASTM C 1211 : 2018 : REDLINE | Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures |
ASTM C 210 : 1995 : R2007 : EDT 1 | Standard Test Method for Reheat Change of Insulating Firebrick |
ASTM C 210 : 1995 : R1999 | Standard Test Method for Reheat Change of Insulating Firebrick |
ASTM D 5869 : 2007 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
API MPMS CHAPTER 19.3 PART D : 2001(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART D - FUGITIVE EMISSIONS TEST METHOD OF DECK-SEAM LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS |
BS ISO 13573:2012 | Corrosion of metals and alloys. Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials |
ISO 17224:2015 | Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances |
API MPM CH19.3D:2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART D - FUGITIVE EMISSIONS TEST METHOD OF DECK-SEAM LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS |
API MPM CH19.3C : 1998(R2018) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - EVAPORATIVE LOSS MEASUREMENT - WEIGHT LOSS TEST METHOD FOR THE MEASUREMENT OF RIM-SEAL LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS |
ASTM E 644 : 2011 : REDLINE | Standard Test Methods for Testing Industrial Resistance Thermometers |
API MPM CH19.3C : 1998(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - EVAPORATIVE LOSS MEASUREMENT - WEIGHT LOSS TEST METHOD FOR THE MEASUREMENT OF RIM-SEAL LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS |
ASTM C 1465 : 2008 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
CSA Z223.1 : 0 | METHOD FOR THE DETERMINATION OF PARTICULATE MASS FLOWS IN ENCLOSED GAS STREAMS |
ASTM E 839 : 2011 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
BS ISO 29473:2010 | Fire tests. Uncertainty of measurements in fire tests |
BS 874-1:1986 | Methods for determining thermal insulating properties Introduction, definitions and principles of measurement |
ASTM D 3711 : 1995 : R2000 : EDT 1 | Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
ASTM C 113 : 2014 : REDLINE | Standard Test Method for Reheat Change of Refractory Brick |
ASTM D 6482 : 2006 | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
ASTM E 696 : 2007 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
ASTM C 335 : 2005 : REV A : EDT 1 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
ASTM D 4681 : 1987 | Specification For Lubricants For Two-Stroke-Cycle Gasoline Engines- (TSC-4) (Withdrawn 1995) |
ASTM D 5958 : 1999 | Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
ASTM C 835 : 2006 | Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C |
AWS C3.6 : 1999 | SPECIFICATION FOR FURNACE BRAZING |
ASTM C 372 : 1994 : R2001 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
ASTM D 2879 : 2010-10 | TEST METHOD FOR VAPOR PRESSURE-TEMPERATURE RELATIONSHIP AND INITIAL DECOMPOSITION TEMPERATURE OF LIQUIDS BY ISOTENISCOPE |
ASTM E 207 : 2008 | Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties |
ASTM E 2877 : 2012 | Standard Guide for Standard Guide for Digital Contact Thermometers |
ASTM D 5958 : 1999 : R2011 | Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
ASTM E 2536 : 2015 : REV A | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
ASTM C 372 : 1994 : R2012 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
ASTM C 865 : 2017 : REDLINE | Standard Practice for Firing Refractory Concrete Specimens |
ASTM D 4857 : 2012 : REDLINE | Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
ASTM E 2820 : 2013-07 | TEST METHOD FOR EVALUATING THERMAL EMF PROPERTIES OF BASE-METAL THERMOCOUPLE CONNECTORS |
ASTM E 696 : 2007 : R2013 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
ASTM E 1350 : 2013-08 | GUIDE FOR TESTING SHEATHED THERMOCOUPLES, THERMOCOUPLES ASSEMBLIES, AND CONNECTING WIRES PRIOR TO, AND AFTER INSTALLATION OR SERVICE |
ASTM E 2877 : 2012e1 | GUIDE FOR DIGITAL CONTACT THERMOMETERS |
ASTM D 7873 : 2013 : R2017 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) |
ASTM E 2730 : 2010 : R2015 : EDT 1 | Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits |
API MPM CH19.3A : 1997(R2012) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART A - WIND TUNNEL TEST METHOD FOR THE MEASUREMENT OF DECK-FITTING LOSS FACTORS FOR EXTERNAL FLOATING-ROOF TANKS |
08/30183661 DC : DRAFT SEP 2008 | BS ISO 29473 - FIRE TESTS - UNCERTAINTY OF MEASUREMENTS IN FIRE TESTS |
13/30259880 DC : 0 | BS ISO 17224 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR HIGH-TEMPERATURE CORROSION TESTING OF METALLIC MATERIALS BY APPLICATION OF A DEPOSIT OF SALT, ASH OR OTHER SUBSTANCES |
BS ISO 17224:2015 | Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances |
API MPM CH19.3C : 1998 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - EVAPORATIVE LOSS MEASUREMENT - WEIGHT LOSS TEST METHOD FOR THE MEASUREMENT OF RIM-SEAL LOSS FACTORS FOR INTERNAL FLOATING-ROOF TANKS |
ASTM D 6200 : 2001 : R2012 | Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
ASTM D 6549 : 2006 : R2011 | Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) |
ASTM D 1384 : 2005 : R2012 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
ASTM E 2730 : 2010 | Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits |
ASTM D 4858 : 2013 : REDLINE | Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines |
MIL-PRF-62430 Revision B:2010 | HARNESS ASSEMBLY, THERMOCOUPLE |
ASTM E 608/E608M : 2013 : REDLINE | SPECIFICATION FOR MINERAL-INSULATED, METAL-SHEATHED BASE METAL THERMOCOUPLES |
ASTM C 1337 : 2017 : REDLINE | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
ASTM D 5958 : 1999 : R2005 : EDT 1 | Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
ASTM E 2714 : 2013 : REDLINE | Standard Test Method for Creep-Fatigue Testing |
ASTM D 7873 : 2013 : EDT 1 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method) |
SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
ASTM D 6482 : 2006 : R2016 | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
ASTM C 1363 : 2011 : REDLINE | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
ASTM D 6549 : 2006 : R2015 | Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) |
ASTM D 1384 : 2005 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
ASTM D 6482 : 2006 : R2011 | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method) |
ASTM D 5207 : 2014 : REDLINE | Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
ASTM E 235/E235M : 2012 | Standard Specification for Type K and Type N Mineral-Insulated, Metal-Sheathed Thermocouples for Nuclear or for Other High-Reliability Applications |
ASTM D 4693 : 2007 : R2017 | Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
API 551 : 2016 | PROCESS MEASUREMENT |
ASHRAE 41.1 : 2013 | STANDARD METHOD FOR TEMPERATURE MEASUREMENT |
10/30231379 DC : 0 | BS ISO 21608 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR ISOTHERMAL-EXPOSURE OXIDATION TESTING UNDER HIGH-TEMPERATURE CORROSION CONDITIONS FOR METALLIC MATERIALS |
MIL-DTL-25446 Revision E:2012 | Transmitter, Temperature, Electrical Resistance, Armored, Bayonet Locking Type, (-50 Degrees C to 300 Degrees C) |
ASTM E 633 : 2013 : REDLINE | Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air |
ASTM C 976 : 1990 : R1996 : EDT 1 | Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (Withdrawn 2002) |
AWS C3.7 : 1999 | SPECIFICATION FOR ALUMINUM BRAZING |
ASTM E 696 : 2007 : R2018 | Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire |
TR AMS2750 : 2009 | AEROSPACE SERIES - AEROSPACE MATERIAL SPECIFICATION - PYROMETRY |
ASTM E 601 : 2015 : REDLINE | Standard Guide for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air |
ASTM C 335/C335M : 2017 : REDLINE | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
ASTM C 372 : 1994 : R2001 : EDT 1 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
ASTM D 4693 : 2007 | Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
ASTM E 1232 : 2007 : R2013 | Standard Test Method for Temperature Limit of Flammability of Chemicals |
ASTM C 1291 : 2018 : REDLINE | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
ASTM D 7646 : 2010 : R2014 | Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis |
ASTM E 1232 : 2007 | Standard Test Method for Temperature Limit of Flammability of Chemicals |
ASTM D 1384 : 2005 : EDT 1 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
ASTM D 5869 : 2007 : REV A : R2013 | Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
ASTM E 608/E608M : 2013 : R2019 | Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples |
ASTM C 210 : 1995 | TEST METHOD FOR REHEAT CHANGE OF INSULATING FIREBRICK |
BS ISO 17245:2015 | Corrosion of metals and alloys. Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions |
ASTM E 220 : 2013 : REDLINE | Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
ASTM C 372 : 1994 : R2016 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
SAE ARP 5144 : 2017 | HEAT APPLICATION FOR THERMOSETTING RESIN CURING |
ASTM C 372 : 1994 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
11/30210857 DC : 0 | BS ISO 13573 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR THERMAL-CYCLING EXPOSURE TESTING UNDER HIGH-TEMPERATURE CORROSION CONDITIONS FOR METALLIC MATERIALS |
13/30259830 DC : 0 | BS ISO 17248 - CORROSION OF METALS AND ALLOYS - TEST METHOD FOR HIGH-TEMPERATURE CORROSION TESTING OF METALLIC MATERIALS BY EMBEDDING IN SALT, ASH, OR OTHER SOLIDS |
ASTM D 5958 : 1999 : R2012 : EDT 1 | Standard Practices for Preparation of Oil-Based Ink Resin Solutions |
MIL-P-11570 Revision C:1984 | PYROMETERS, INDICATING, THERMOCOUPLES |
AWS C3.7M/C3.7 : 2011 | SPECIFICATION FOR ALUMINUM BRAZING |
ASTM F 526 : 2016 : REDLINE | Standard Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines |
SAE AMS 2750 : 2012 | PYROMETRY |
IES LM 82 : 2012 | CHARACTERIZATION OF LED LIGHT ENGINES AND LED LAMPS FOR ELECTRICAL AND PHOTOMETRIC PROPERTIES AS A FUNCTION OF TEMPERATURE |
ASTM D 6549 : 2006 | Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) |
API MPM CH19.3A : 1997 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 19.3 - EVAPORATIVE LOSS MEASUREMENT - PART A - WIND TUNNEL TEST METHOD FOR THE MEASUREMENT OF DECK-FITTING LOSS FACTORS FOR EXTERNAL FLOATING-ROOF TANKS |
ASTM E 2584 : 2014 : REDLINE | Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter |
ASTM E 2181/E2181M : 2011 | Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable |
ASTM D 4693 : 2007 : R2012 | Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings |
ASTM C 210 : 1995 : R2005 | Standard Test Method for Reheat Change of Insulating Firebrick |
ASTM D 6200 : 2001 : R2017 | Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
ASTM C 1834 : 2016 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures |
ASTM E 1225 : 2013 : REDLINE | Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique |
ISO 29473:2010 | Fire tests — Uncertainty of measurements in fire tests |
ASTM E 2730 : 2010 : R2015 : EDT 2 | Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits |
ISO 17248:2015 | Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids |
ISO 17245:2015 | Corrosion of metals and alloys Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions |
ASTM E 1232 : 2007 : R2019 | Standard Test Method for Temperature Limit of Flammability of Chemicals |
ASTM D 4611 : 2016 : REDLINE | Standard Test Method for Specific Heat of Rock and Soil |
ASTM E 839 : 2011 : R2016 : EDT 1 | Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable |
ASTM E 207 : 2008 : R2015 | Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties |
ASTM D 7873 : 20131 | Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120°C Without the Inclusion of Water (Dry TOST Method) |
ASME PTC19.3 : 1974(R2004) | PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT |
PIP ELSWC05 : 2015 | 300-VOLT INSTRUMENTATION TRAY CABLE SPECIFICATION |
IEC 60584-3:2007 | Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system |
ASTM E 1159 : 2015 : REDLINE | Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.