![header thumbnail](/images/publishers\astm_cover.gif)
ASTM E 456 : 2013 : REV A : R2017 : EDT 4
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Terminology Relating to Quality and Statistics
Hardcopy , PDF
25-05-2021
English
16-04-2020
Committee |
E 11
|
DocumentType |
Reference Material
|
Pages |
11
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This standard is the general terminology standard for terms defined in the standards of Committee E11 on Quality and Statistics.
1.2A term in this standard which lists an attribution to an E11 technical standard indicates that the standard is normative for that term. Any changes in the term definition in the normative standard will be editorially changed in this standard. Any terms added to an E11 standard will be editorially added to this standard with an attribution to that standard.
1.3Term definitions that are similar to ISO 3534 will be noted in this standard, but ISO 3534 will not be considered normative for any E11 terms.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 8293 : 2019 | Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements |
ASTM D 6300 : 2020 : REV B | Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants |
ASTM E 3159 : 2018 | Standard Guide for General Reliability |
ASTM D 5961/D5961M : 2017 | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
ASTM D 7617/D7617M : 2011 : R2017 | Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
ASTM D 5523 : 2021 | Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
ASTM C 365/C365M : 2016 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
ASTM D 6621 : 2000 : R2017 | Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials |
ASTM C 613 : 2019 | Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
ASTM D 6576 : 2020 | Standard Specification for Flexible Cellular Rubber Chemically Blown |
ASTM F 2554 : 2018 | Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems |
ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
ASTM D 7778 : 2015 | Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 2919 : 2014 | Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose |
ASTM D 5357 : 2019 | Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction |
ASTM C 363/C363M : 2016 | Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
ASTM D 6641/D6641M : 2016 : EDT 2 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
ASTM D 4968 : 2019 : REV A | Standard Practice for Annual Review of Test Methods and Specifications for Plastics |
ASTM E 399 : 2020 : REV A | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials |
ASTM D 7264/D7264M : 2021 | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
ASTM D 7290 : 2006 : R2017 | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
ASTM D 4877 : 2019 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
ASTM E 2610 : 2018 | Standard Test Method for Sensory Analysis—Duo-Trio Test |
ASTM D 5048 : 2020 : REV A | Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
ASTM D 7337/D7337M : 2012 : R2019 | Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
ASTM E 131 : 2010 : R2015 | Standard Terminology Relating to Molecular Spectroscopy |
ASTM D 6792 : 2020 | Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
ASTM C 364/C364M : 2016 | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
ASTM D 7248/D7248M : 2012 : R2017 | Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
ASTM D 4659 : 2019 | Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
ASTM E 2108 : 2016 | Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer |
ASTM E 2164 : 2016 | Standard Test Method for Directional Difference Test |
ASTM D 4481 : 2010 : R2015 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
ASTM E 3009 : 2015 : EDT 1 | Standard Test Method for Sensory Analysis—Tetrad Test |
ASTM E 2655 : 2014 : R2020 | Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
ASTM D 5517 : 2014 | Standard Test Method for Determining Extractability of Metals from Art Materials |
ASTM D 2344/D2344M : 2016 | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
ASTM D 6259 : 2015 : R2019 | Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method |
ASTM D 3552 : 2017 | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
ASTM D 792 : 2020 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ASTM C 1673 : 2010 : REV A : R2018 | Standard Terminology of C26.10 Nondestructive Assay Methods |
ASTM D 5758 : 2001 : R2015 | Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction |
ASTM D 1622 : 2020 | Standard Test Method for Apparent Density of Rigid Cellular Plastics |
ASTM E 2544 : 2011 : REV A : R2019 | Standard Terminology for Three-Dimensional (3D) Imaging Systems |
ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM E 2943 : 2015 : R2021 | Standard Guide for Two-Sample Acceptance and Preference Testing With Consumers |
ASTM D 4513 : 2011 : R2017 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving |
ASTM E 3193 : 2020 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
ASTM F 1645/F1645M : 2016 | Standard Test Method for Water Migration in Honeycomb Core Materials |
ASTM D 4179 : 2011 : R2017 | Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers |
ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
ASTM D 4464 : 2015 : R2020 | Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
ASTM D 7332/D7332M : 2016 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite |
ASTM D 7616/D7616M : 2011 : R2017 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
ASTM D 7084 : 2018 | Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers |
ASTM C 1427 : 2021 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
ASTM E 2587 : 2016 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM E 2798 : 2019 | Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application |
ASTM D 7250/D7250M : 2020 | Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
ASTM D 7336/D7336M : 2016 | Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
ASTM C 366/C366M : 2016 | Standard Test Methods for Measurement of Thickness of Sandwich Cores |
ASTM E 2782 : 2017 | Standard Guide for Measurement Systems Analysis (MSA) |
ASTM D 5450/D5450M : 2016 | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM E 1655 : 2017 | Standard Practices for Infrared Multivariate Quantitative Analysis |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 178 : 2016 : REV A | Standard Practice for Dealing With Outlying Observations |
ASTM E 2862 : 2018 | Standard Practice for Probability of Detection Analysis for Hit/Miss Data |
ASTM E 2653 : 2015 | Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
ASTM E 2489 : 2016 | Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs |
ASTM D 3014 : 2019 : REV A | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
ASTM D 5379/D5379M : 2019 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
ASTM C 1255 : 2018 | Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy |
ASTM D 7137/D7137M : 2017 | Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
ASTM D 5280 : 1996 : R2013 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
ASTM D 4180 : 2013 : R2018 | Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers |
ASTM D 6026 : 2013 | Standard Practice for Using Significant Digits in Geotechnical Data |
ASTM D 4781 : 2003 : R2018 : EDT 1 | Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles |
ASTM D 8132/D8132M : 2017 | Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement |
ASTM D 6484/D6484M : 2020 | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
ASTM E 2834 : 2012 : R2018 | Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA) |
ASTM D 4365 : 2019 | Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst |
ASTM D 6890 : 2018 | Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber |
ASTM D 6226 : 2021 | Standard Test Method for Open Cell Content of Rigid Cellular Plastics |
ASTM D 2234/D2234M : 2020 | Standard Practice for Collection of a Gross Sample of Coal |
ASTM D 2700 : 2019 : EDT 1 | Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
ASTM D 6342 : 2012 : R2017 : EDT 1 | Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
ASTM E 2586 : 2019 : EDT 1 | Standard Practice for Calculating and Using Basic Statistics |
ASTM D 4782 : 2010 : R2016 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry |
ASTM D 7846 : 2016 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
ASTM D 8321 : 2020 | Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements |
ASTM C 721 : 2020 | Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability |
ASTM B 963 : 2017 | Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
ASTM E 2281 : 2015 : R2020 | Standard Practice for Process Capability and Performance Measurement |
ASTM D 7205/D7205M : 2006 : R2016 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
ASTM B 939 : 2021 | Standard Test Method for Radial Crushing Strength, <emph type="bdit">K</emph>, of Powder Metallurgy (PM) Bearings and Structural Materials |
ASTM D 3410/D3410M : 2016 : EDT 1 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
ASTM E 1970 : 2016 | Standard Practice for Statistical Treatment of Thermoanalytical Data |
ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
ASTM D 6175 : 2003 : R2019 | Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles |
ASTM D 4284 : 2012 : R2017 : EDT 1 | Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry |
ASTM D 6290 : 2019 | Standard Test Method for Color Determination of Plastic Pellets |
ASTM D 5681 : 2020 | Standard Terminology for Waste and Waste Management |
ASTM D 3518/D3518M : 2018 | Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
ASTM D 7310 : 2020 | Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors |
ASTM D 8336 : 2021 | Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure |
ASTM D 8004 : 2015 | Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing |
ASTM D 1871 : 2004 : R2014 | Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) |
ASTM D 7766/D7766M : 2016 | Standard Practice for Damage Resistance Testing of Sandwich Constructions |
ASTM C 534/C534M : 2020 : REV A | Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
ASTM D 4986 : 2020 | Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
ASTM D 5766/D5766M : 2011 : R2018 | Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
ASTM D 3575 : 2020 | Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
ASTM D 4699 : 2003 : R2018 : EDT 1 | Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles |
ASTM D 2842 : 2019 | Standard Test Method for Water Absorption of Rigid Cellular Plastics |
ASTM E 2696 : 2009 : R2018 | Standard Practice for Life and Reliability Testing Based on the Exponential Distribution |
ASTM E 2475 : 2010 : R2016 | Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control |
ASTM E 1847 : 1996 : R2013 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines (Withdrawn 2022) |
ASTM E 766 : 2014(R2019) | Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope |
ASTM D 909 : 2018 : EDT 1 | Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline |
ASTM D 4812 : 2019 | Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
ASTM C 273/C273M : 2020 | Standard Test Method for Shear Properties of Sandwich Core Materials |
ASTM E 1732 : 2019 : EDT 1 | Standard Terminology Relating to Forensic Science |
ASTM D 613 : 2018 : REV A : EDT 1 | Standard Test Method for Cetane Number of Diesel Fuel Oil |
ASTM D 3675 : 2021 : REV A | Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM D 635 : 2018 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
ASTM D 6115 : 1997 : R2019 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 3769 : 2020 | Standard Test Method for Microcellular Urethanes—High-Temperature Sag |
ASTM D 7078/D7078M : 2020 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
ASTM D 6790/D6790M : 2016 | Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
ASTM D 3030 : 2017 | Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
ASTM D 1603 : 2020 | Standard Test Method for Carbon Black Content in Olefin Plastics |
ASTM E 2120 : 2010 : R2016 | Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
ASTM D 8067/D8067M : 2017 | Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture |
ASTM D 2126 : 2020 | Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
ASTM B 855 : 2017 | Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel |
ASTM D 1977 : 2016 | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
ASTM D 5528 : 2013 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM E 1617 : 2009 : R2019 | Standard Practice for Reporting Particle Size Characterization Data |
ASTM C 1683 : 2010 : R2019 | Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics |
ASTM D 5154/D5154M : 2018 | Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
ASTM D 4662 : 2020 | Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
ASTM D 6671/D6671M : 2019 | Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
ASTM F 1061 : 2008 : R2020 | Standard Specification for Ski Binding Test Devices |
ASTM D 5449/D5449M : 2016 | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 3801 : 2020 : REV A | Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
ASTM B 761 : 2017 | Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation |
ASTM D 1238 : 2020 | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 7565/D7565M : 2010 : R2017 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
ASTM E 2283 : 2008 : R2019 | Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features |
ASTM D 3856 : 2011 : R2015 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) |
ASTM D 4804 : 2020 | Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
ASTM D 4164 : 2013 : R2018 | Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers |
ASTM D 7668 : 2017 | Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method |
ASTM C 1648 : 2012 : R2018 | Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass |
ASTM B 331 : 2020 | Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction |
ASTM D 2396 : 2020 | Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer |
ASTM E 141 : 2010 : R2018 | Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
ASTM D 1056 : 2020 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
ASTM D 4058 : 1996 : R2020 | Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
ASTM D 8066/D8066M : 2017 | Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates |
ASTM B 330 : 2020 | Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability |
ASTM D 6631 : 2005 : R2019 | Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method |
ASTM D 6873/D6873M : 2019 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
ASTM E 1260 : 2003 : R2020 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
ASTM E 526 : 2017 : EDT 1 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium |
ASTM C 1474 : 2019 | Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry |
ASTM D 6108 : 2019 | Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
ASTM E 2677 : 2020 | Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest |
ASTM D 6742/D6742M : 2017 | Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
ASTM D 6856/D6856M : 2003 : R2016 | Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
ASTM E 2262 : 2003 : R2020 | Standard Practice for Estimating Thurstonian Discriminal Distances |
ASTM D 4255/D4255M : 2020 | Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
ASTM E 2263 : 2012 : R2018 | Standard Test Method for Paired Preference Test |
ASTM E 1325 : 2016 | Standard Terminology Relating to Design of Experiments |
ASTM D 1790 : 2021 | Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM D 5117 : 2017 | Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
ASTM D 6772/D6772M : 2016 | Standard Test Method for Dimensional Stability of Sandwich Core Materials |
ASTM F 3263 : 2017 | Standard Guide for Packaging Test Method Validation |
ASTM F 1789 : 2017 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM E 3000 : 2018 | Standard Guide for Measuring and Tracking Performance of Assessors on a Descriptive Sensory Panel |
ASTM D 6341 : 2021 | Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) |
ASTM C 480/C480M : 2016 | Standard Test Method for Flexure Creep of Sandwich Constructions |
ASTM B 311 : 2017 | Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
ASTM E 1827 : 2011 : R2017 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 1323 : 2015 : R2020 | Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM D 5448/D5448M : 2016 | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM E 1707 : 2015 | Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing |
ASTM D 7914/D7914M : 2021 | Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
ASTM E 1297 : 2018 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
ASTM D 6299 : 2020 : REV A | Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance |
ASTM D 5153 : 2010 : R2016 | Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption |
ASTM E 2762 : 2010 : R2020 | Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL |
ASTM E 1169 : 2020 | Standard Practice for Conducting Ruggedness Tests |
ASTM D 4780 : 2012 : R2017 : EDT 1 | Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption |
ASTM D 4226 : 2019 : EDT 1 | Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
ASTM D 6122 : 2020 : REV A | Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems |
ASTM E 2234 : 2009 : R2018 | Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL |
ASTM D 6883 : 2017 | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
ASTM D 7291/D7291M : 2015 | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
ASTM D 7372 : 2017 | Standard Guide for Analysis and Interpretation of Proficiency Test Program Results |
ASTM C 394/C394M : 2016 | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
ASTM D 6415/D6415M : 2006 : REV A : R2013 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
ASTM D 5155 : 2019 | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
ASTM D 4512 : 2003 : R2018 : EDT 1 | Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
ASTM D 1004 : 2021 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 6264/D6264M : 2017 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
ASTM D 7390 : 2018 : EDT 1 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
ASTM D 7027 : 2020 | Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine |
ASTM D 3012 : 2019 | Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven |
ASTM C 271/C271M : 2016 | Standard Test Method for Density of Sandwich Core Materials |
ASTM D 3039/D3039M : 2017 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
ASTM D 7249/D7249M : 2020 | Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure |
ASTM E 2910 : 2012 : R2018 | Standard Guide for Preferred Methods for Acceptance of Product |
ASTM E 3080 : 2019 | Standard Practice for Regression Analysis with a Single Predictor Variable |
ASTM D 4463/D4463M : 2019 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASTM D 5124 : 1996 : R2018 | Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation |
ASTM D 4567 : 2019 | Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method |
ASTM C 917/C917M : 2018 | Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength |
ASTM D 2885 : 2020 | Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique |
ASTM E 3143 : 2018 : REV B | Standard Practice for Performing Cryo-Transmission Electron Microscopy of Liposomes |
ASTM E 266 : 2017 | Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 3576 : 2020 | Standard Test Method for Cell Size of Rigid Cellular Plastics |
ASTM F 2232 : 2014 : R2020 | Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear |
ASTM F 1062 : 1997 : R2018 | Standard Test Method for Verification of Ski Binding Test Devices |
ASTM C 1067 : 2020 | Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials |
ASTM E 2363 : 2014 | Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry |
ASTM F 3211 : 2017 | Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices |
ASTM E 1885 : 2018 | Standard Test Method for Sensory Analysis—Triangle Test |
ASTM D 5492 : 2017 | Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
ASTM E 284 : 2017 | Standard Terminology of Appearance |
ASTM F 1773 : 2009 : R2015 | Standard Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices (Withdrawn 2024) |
ASTM E 2709 : 2019 | Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure |
ASTM E 1706 : 2020 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM D 3907/D3907M : 2019 | Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
ASTM D 7615/D7615M : 2019 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
ASTM D 8145 : 2018 | Standard Practice for Sampling of Green Petroleum Coke |
ASTM E 177 : 2020 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 2843 : 2019 | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
ASTM D 5132 : 2020 | Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
ASTM D 6761 : 2017 | Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers |
ASTM D 1044 : 2019 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
ASTM B 703 : 2017 | Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter |
ASTM D 2699 : 2019 : EDT 1 | Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel |
ASTM D 3906 : 2019 | Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials |
ASTM D 7705/D7705M : 2012 : R2019 | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
ASTM D 8131/D8131M : 2017 : EDT 1 | Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
ASTM D 4642 : 2004 : R2016 | Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
ASTM D 7905/D7905M : 2019 : EDT 1 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 2863 : 2019 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
ASTM D 3663 : 2020 | Standard Test Method for Surface Area of Catalysts and Catalyst Carriers |
ASTM E 2139 : 2005 : R2018 | Standard Test Method for Same-Different Test |
ASTM C 297/C297M : 2016 | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
ASTM E 1458 : 2012 : R2016 | Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles |
ASTM E 2819 : 2011 : R2015 | Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL |
ASTM D 4218 : 2020 | Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique |
ASTM D 5420 : 2021 | Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
ASTM D 7136/D7136M : 2020 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
ASTM D 6609 : 2017 | Standard Guide for Part-Stream Sampling of Coal |
ASTM E 3023 : 2021 | Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data |
ASTM D 8314 : 2020 | Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping |
ASTM E 2554 : 2018 : EDT 1 | Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques |
ASTM D 3479/D3479M : 2019 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
ASTM D 4663 : 2020 | Flameproof restrained plugs |
ASTM D 3908 : 2020 | Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method |
ASTM D 2047 : 2017 | Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine |
ASTM C 1271 : 1999 : R2020 | Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone |
ASTM F 2150 : 2019 | Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products |
ASTM C 802 : 2014 | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
ASTM F 3107 : 2014 | Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems |
ASTM D 2013/D2013M : 2020 | Standard Practice for Preparing Coal Samples for Analysis |
ASTM C 393/C393M : 2020 | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
ASTM D 4889 : 2021 | Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates |
ASTM D 4222 : 2020 | Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements |
ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 6109 : 2019 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
ASTM D 5757 : 2011 : R2017 | Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets |
ASTM C 1671 : 2020 : REV A | Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging |
ASTM D 7956/D7956M : 2016 | Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
ASTM D 1203 : 2020 | Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods |
ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
ASTM D 7309 : 2021 | Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry |
ASTM C 670 : 2015 | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
ASTM C 1285 : 2021 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM E 1656/E1656M : 2011 : R2016 | Standard Guide for Classification of Automated Pavement Condition Survey Equipment (Withdrawn 2022) |
ASTM E 535 : 2019 | Standard Practice for Preparation of Fire-Test-Response Standards |
ASTM D 1929 : 2020 | Standard Test Method for Determining Ignition Temperature of Plastics |
ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM E 1169 : 2018 | Standard Practice for Conducting Ruggedness Tests |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 2334 : 2009 : R2018 | Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-Conformities, Using Attribute Data, When There is a Zero Response in the Sample |
ASTM E 2587 : 2007 : EDT 1 | Standard Practice for Use of Control Charts in Statistical Process Control |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 1402 : 2013 : R2018 | Standard Guide for Sampling Design |
ASTM E 2555 : 2007 : R2018 : EDT 1 | Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection |
ASTM E 178 : 2000 | Standard Practice for Dealing With Outlying Observations |
ASTM E 2489 : 2016 | Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs |
ASTM E 178 : 1994 | Standard Practice for Dealing With Outlying Observations |
ASTM E 2282 : 2014 : R2019 | Standard Guide for Defining the Test Result of a Test Method |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 1488 : 1996 | Standard Guide for Statistical Procedures to Use in Developing and Applying ASTM Test Methods |
ASTM E 1994 : 2009 : R2018 | Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ASTM E 2782 : 2017 | Standard Guide for Measurement Systems Analysis (MSA) |
ASTM E 1488 : 2012 : R2018 | Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.