ASTM E 543 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Agencies Performing Nondestructive Testing
Available format(s)
Hardcopy , PDF
Superseded date
20-08-2021
Superseded by
Language(s)
English
Published date
05-03-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.1.1 This specification covers minimum requirements for agencies performing nondestructive testing (NDT).
| Committee |
E 07
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers minimum requirements for agencies performing nondestructive testing (NDT).
1.2When using this specification to assess the capability of, or to accredit NDT agencies, Guide E1359 shall be used as a basis for the survey. It can be supplemented as necessary with more detail in order to meet the auditor's specific needs.
1.3This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private.
1.4The use of SI or inch-pound units, or combination thereof, will be the responsibility of the technical committee whose standards are referred to in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 1118/E1118M : 2016 : R2020 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 748 : 2019 | Standard Guide for Thermal Neutron Radiography of Materials |
| ASTM E 3170/E3170M : 2018 | Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints |
| ASTM E 2533 : 2021 | Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications |
| ASTM E 2984/E2984M : 2014 | Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
| ASTM E 2775 : 2016 | Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction |
| ASTM E 1888/E1888M : 2017 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| ASTM E 3100 : 2017 | Standard Guide for Acoustic Emission Examination of Concrete Structures |
| ASTM E 1067/E1067M : 2018 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 2003 : 2020 | Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators |
| ASTM E 751/E751M : 2017 | Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
| ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
| ASTM E 3052 : 2016 | Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
| ASTM C 1331 : 2018 | Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
| ASTM E 94/E94M : 2017 | Standard Guide for Radiographic Examination Using Industrial Radiographic Film |
| ASTM E 2023 : 2019 | Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators |
| ASTM E 2929 : 2018 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
| ASTM E 2261/E2261M : 2017 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| ASTM E 2479 : 2016 : R2021 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
| ASTM E 1417/E1417M : 2016 | Standard Practice for Liquid Penetrant Testing |
| ASTM E 1003 : 2013 : R2018 | Standard Practice for Hydrostatic Leak Testing |
| ASTM E 588 : 2003 : R2020 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
| ASTM E 2982 : 2021 | Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 165/E165M : 2018 | Standard Practice for Liquid Penetrant Testing for General Industry |
| ASTM E 2884 : 2017 | Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
| ASTM F 2959 : 2021 | Standard Practice for Aerial Adventure Courses |
| ASTM E 3024/E3024M : 2019 | Standard Practice for Magnetic Particle Testing for General Industry |
| ASTM E 2104 : 2015 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM E 2191/E2191M : 2016 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 2373/E2373M : 2019 | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
| ASTM E 1814 : 2014 | Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM E 2983 : 2014 : R2019 | Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
| ASTM E 1002 : 2011 : R2018 | Standard Practice for Leaks Using Ultrasonics |
| ASTM E 570 : 2020 | Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
| ASTM E 2985/E2985M : 2014 : R2019 | Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
| ASTM E 709 : 2021 | Standard Guide for Magnetic Particle Testing |
| ASTM E 215 : 2016 | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
| ASTM E 1210 : 2021 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
| ASTM E 1418 : 2021 | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
| ASTM E 2698 : 2018 : EDT 1 | Standard Practice for Radiographic Examination Using Digital Detector Arrays |
| ASTM E 797/E797M : 2015 | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
| ASTM E 2906/E2906M : 2018 | Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
| ASTM E 2907/E2907M : 2013 : R2019 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
| ASTM E 1219 : 2021 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
| ASTM E 213 : 2020 | Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
| ASTM E 3167/E3167M : 2018 | Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints |
| ASTM C 1332 : 2018 | Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
| ASTM E 494 : 2020 | Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method |
| ASTM E 569/E569M : 2020 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
| ASTM E 566 : 2019 | Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals |
| ASTM E 329 : 2021 | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
| ASTM E 2662 : 2015 | Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 1209 : 2018 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
| ASTM E 164 : 2019 | Standard Practice for Contact Ultrasonic Testing of Weldments |
| ASTM E 426 : 2016 : R2021 | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 515 : 2011 : R2018 | Standard Practice for Leaks Using Bubble Emission Techniques |
| ASTM E 1030/E1030M : 2021 | Standard Practice for Radiographic Examination of Metallic Castings |
| ASTM E 3101 : 2018 | Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints |
| ASTM E 1220 : 2021 | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
| ASTM E 703 : 2020 | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
| ASTM E 2863 : 2017 | Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
| ASTM E 243 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 1495/E1495M : 2017 | Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
| ASTM E 273 : 2020 | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ASTM E 1255 : 2016 | Standard Practice for Radioscopy |
| ASTM E 1161 : 2021 | Standard Practice for Radiographic Examination of Semiconductors and Electronic Components |
| ASTM E 3044/E3044M : 2016 : EDT 1 | Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints |
| ASTM E 1817 : 2008 : R2014 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
| ASTM E 749/E749M : 2017 | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
| ASTM E 1139/E1139M : 2017 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 664/E664M : 2015 : R2020 : EDT 1 | Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
| ASTM E 2598/E2598M : 2013 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
| ASTM E 999 : 2020 | Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ASTM E 2928/E2928M : 2017 | Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
| ASTM E 1416 : 2016 : REV A | Standard Practice for Radioscopic Examination of Weldments |
| ASTM E 2076/E2076M : 2015 | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 1419/E1419M : 2015 : REV A : R2020 | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 2981 : 2021 | Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
| ASTM E 2861 : 2016 : R2020 | Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams |
| ASTM E 1930/E1930M : 2017 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 587 : 2015 : R2020 | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
| ASTM E 2581 : 2014 : R2019 | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
| ASTM E 801 : 2016 | Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices |
| ASTM E 114 : 2020 | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
| ASTM E 545 : 2019 | Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
| ASTM E 2024/E2024M : 2011 : R2019 | Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
| ASTM E 690 : 2015 : R2020 | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
| ASTM E 1734 : 2016 : REV A | Standard Practice for Radioscopic Examination of Castings |
| ASTM E 2930 : 2013 : R2021 | Standard Practice for Pressure Decay Leak Test Method |
| ASTM E 2661/E2661M : 2020 : EDT 1 | Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
| ASTM E 1742/E1742M : 2018 | Standard Practice for Radiographic Examination |
| ASTM E 2096/E2096M : 2016 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ASTM E 1208 : 2021 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
| ASTM E 1444/E1444M : 2016 : EDT 1 | Standard Practice for Magnetic Particle Testing |
| ASTM E 309 : 2016 | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ASTM E 376 : 2019 | Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods |
| ASTM E 3102 : 2018 | Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application |
| ASTM E 1736 : 2015 | Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
| ASTM E 1211/E1211M : 2017 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM F 1193 : 2018 : REV A | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM E 2076 : 2005 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 213 : 1998 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing |
| ASTM E 1962 : 2009 | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1212 : 2012 | Standard Practice for Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 2261 : 2007 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| ASTM E 2479 : 2006 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<sub>CR</sub>) Waves |
| ASTM E 317 : 2016 | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
| ASTM E 1254 : 2013 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1961 : 2011 | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
| ASTM E 1571 : 2001 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 2338 : 2004 | Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards |
| ASTM E 1316 : 2011 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1033 : 1998 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
| ASTM E 2580 : 2017 | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 1316 : 2015 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1359 : 2002 : R2008 | Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 2534 : 2010 | Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
| ASTM E 1118 : 2005 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 1742 : 2000 | Standard Practice for Radiographic Examination |
| ASTM E 1025 : 2011 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1316 : 2009 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1419 : 2002 : REV B | Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 2192 : 2013 | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
| ASTM E 569 : 1997 | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
| ASTM E 1004 : 2009 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method |
| ASTM E 1962 : 2004 | Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1033 : 2009 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
| ASTM E 213 : 2002 | Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing |
| ASTM E 1316 : 2008 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2010 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 2375 : 2004 | Standard Practice for Ultrasonic Examination of Wrought Products |
| ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2017 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1901 : 2008 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
| ASTM E 1316 : 2013 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1032 : 2012 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM E 1961 : 2016 | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
| ASTM E 1417 : 2005 | Standard Practice for Liquid Penetrant Testing |
| ASTM E 1419 : 2002 : REV A | Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 2479 : 2011 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<sub>CR</sub>) Waves |
| ASTM E 1606 : 2009 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes |
| ASTM E 426 : 2016 : R2021 | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 1316 : 2000 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1774 : 2017 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1901 : 2018 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
| ASTM E 1419 : 2002 | Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 1316 : 2019 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1930 : 2002 | Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 1212 : 1999 | Standard Practice for Quality Control Systems for Nondestructive Testing Agencies |
| ASTM E 2261 : 2003 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| ASTM E 1030 : 2000 | Standard Test Method for Radiographic Examination of Metallic Castings |
| ASTM E 1139 : 2007 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 1030 : 2005 | Standard Test Method for Radiographic Examination of Metallic Castings |
| ASTM E 1932 : 1997 : R2002 : EDT 1 | Standard Guide for Acoustic Emission Examination of Small Parts |
| ASTM E 2223 : 2012 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
| ASTM E 1139 : 1997 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 1774 : 1996 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1032 : 1995 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM E 2580 : 2007 | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 1211 : 2007 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 2479 : 2016 : R2021 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
| ASTM E 1316 : 2014 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1211 : 1997 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 1316 : 2013 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1312 : 1999 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ASTM E 1316 : 2018 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1067 : 2001 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 1962 : 2014 | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1316 : 2011 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1032 : 2006 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM E 709 : 2021 | Standard Guide for Magnetic Particle Testing |
| ASTM E 1774 : 2012 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1067 : 2007 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 2096 : 2005 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ASTM E 2223 : 2013 : R2018 : EDT 1 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
| ASTM E 2001 : 2008 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts |
| ASTM E 1316 : 2007 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1312 : 2009 : R2013 : EDT 1 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ASTM E 1571 : 2011 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 1316 : 2015 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2075 : 2000 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 1316 : 2019 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1025 : 2018 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography |
| ASTM E 1316 : 2013 : REV D | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2000 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2001 : 1998 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts |
| ASTM E 2373 : 2009 | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
| ASTM E 1419 : 2009 | Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 1316 : 2019 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1211 : 2002 | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ASTM E 1312 : 2009 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ASTM E 2096 : 2000 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
| ASTM E 1316 : 2001 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1212 : 2017 | Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 1001 : 2011 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 1004 : 1999 | Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method |
| ASTM E 1359 : 2012 | Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 2223 : 2013 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
| ASTM E 1067 : 1996 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 1001 : 1999 : REV A | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 1004 : 2002 | Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method |
| ASTM E 1932 : 2007 | Standard Guide for Acoustic Emission Examination of Small Parts |
| ASTM E 2373 : 2004 | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
| ASTM E 1316 : 2003 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1417 : 2005 : EDT 1 | Standard Practice for Liquid Penetrant Testing |
| ASTM E 1742 : 2008 : REV A | Standard Practice for Radiographic Examination |
| ASTM E 1316 : 2018 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2491 : 2008 | Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems |
| ASTM E 1496 : 2005 : R2010 | Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) |
| ASTM E 1254 : 2008 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1359 : 1999 | Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 1419 : 2000 | Standard Test Method for Examination of Seamless, Gas- Filled, Pressure Vessels Using Acoustic Emission |
| ASTM E 426 : 2016 | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 2192 : 2007 | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
| ASTM E 1606 : 2015 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
| ASTM E 1901 : 2013 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
| ASTM E 1774 : 1996 : R2007 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1359 : 2017 | Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 1316 : 2006 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 748 : 1995 | Standard Practices for Thermal Neutron Radiography of Materials |
| ASTM E 1316 : 2016 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1417 : 1999 | Standard Practice for Liquid Penetrant Examination |
| ASTM E 1118 : 2000 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 1316 : 2002 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1571 : 1996 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 1930 : 2007 | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 2338 : 2011 | Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards |
| ASTM E 2191 : 2002 | Standard Test Method for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 2192 : 2013 : R2018 | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
| ASTM E 1901 : 1997 | Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods |
| ASTM E 2700 : 2020 | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
| ASTM E 1254 : 2003 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM E 1316 : 2014 : EDT 1 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1025 : 2005 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1496 : 2005 | Standard Test Method for Neutron Radiographic Dimensional Measurements |
| ASTM E 2192 : 2002 | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
| ASTM E 1774 : 1996 : R2002 | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
| ASTM E 1316 : 2010 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1032 : 2001 | Standard Test Method for Radiographic Examination of Weldments |
| ASTM E 2479 : 2016 | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
| ASTM E 2192 : 2008 | Standard Guide for Planar Flaw Height Sizing by Ultrasonics |
| ASTM E 2375 : 2016 | Standard Practice for Ultrasonic Testing of Wrought Products |
| ASTM E 1962 : 1998 | Standard Test Method for Ultrasonic Surface Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 2374 : 2016 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2001 : 2013 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ASTM E 1316 : 2013 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2001 : 2018 | Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts |
| ASTM E 1444 : 2001 | Standard Practice for Magnetic Particle Examination |
| ASTM E 1001 : 2016 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 1742 : 2005 | Standard Practice for Radiographic Examination |
| ASTM E 2338 : 2017 | Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
| ASTM E 650 : 1997 | Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors |
| ASTM E 1030 : 2005 : R2011 | Standard Test Method for Radiographic Examination of Metallic Castings |
| ASTM E 1444 : 1994 : REV A | Standard Practice for Magnetic Particle Examination |
| ASTM E 1629 : 2007 | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
| ASTM E 2338 : 2006 | Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards |
| ASTM E 317 : 2021 | Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments |
| ASTM E 2223 : 2007 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
| ASTM E 1359 : 2009 | Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 1254 : 1998 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1025 : 1998 | Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology |
| ASTM E 1359 : 2002 | Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies |
| ASTM E 1316 : 2017 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1315 : 1993 | Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces |
| ASTM E 1316 : 2016 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1001 : 2006 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 2700 : 2009 | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
| ASTM E 2491 : 2006 | Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Examination Instruments and Systems |
| ASTM E 1316 : 2009 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1932 : 2012 | Standard Guide for Acoustic Emission Examination of Small Parts |
| ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1816 : 2018 | Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods |
| ASTM E 2076 : 2000 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 1316 : 2004 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 1315 : 1993 : R2002 | Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces (Withdrawn 2007) |
| ASTM E 1571 : 2011 : R2016 : EDT 1 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 1312 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ASTM E 1316 : 2007 : REV C | Standard Terminology for Nondestructive Examinations |
| ASTM E 1316 : 2010 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 2534 : 2015 | Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts |
| ASTM E 1118 : 1995 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
| ASTM E 1316 : 2013 : REV A | Standard Terminology for Nondestructive Examinations |
| ASTM E 2580 : 2012 | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E 2223 : 2002 | Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics |
| ASTM E 1961 : 1998 | Standard Practice for Mechanized Ultrasonic Examination of Girth Welds Using Zonal Discrimination with Focused Search Units |
| ASTM E 2491 : 2013 : R2018 | Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems |
| ASTM E 1032 : 2019 | Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film |
| ASTM E 1961 : 2006 | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
| ASTM E 1254 : 2013 : R2018 | Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E 1742 : 2006 | Standard Practice for Radiographic Examination |
| ASTM E 1212 : 2009 | Standard Practice for Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 1781 : 2008 | Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
| ASTM E 2700 : 2014 | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
| ASTM E 1139 : 2002 | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ASTM E 1496 : 1997 | Standard Test Method for Neutron Radiographic Dimensional Measurements |
| ASTM E 2374 : 2004 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 1001 : 2004 | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| ASTM E 1212 : 2004 | Standard Practice for Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2374 : 2015 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 2375 : 2008 | Standard Practice for Ultrasonic Testing of Wrought Products <a href="#fn00002"></a> |
| ASTM E 1629 : 1994 | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
| ASTM E 2491 : 2013 | Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems |
| ASTM E 1316 : 2007 : REV B | Standard Terminology for Nondestructive Examinations |
| ASTM E 2374 : 2010 | Standard Guide for Acoustic Emission System Performance Verification |
| ASTM E 1033 : 2013 | Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature (Withdrawn 2019) |
| ASTM E 1930 : 1997 | Standard Test Method for Examination of Liquid Filled Atmospheric and Low Pressure Metal Storage Tanks Using Acoustic Emission |
| ASTM E 1316 : 2005 | Standard Terminology for Nondestructive Testing |
| ASTM E 1316 : 2004 | Standard Terminology for Nondestructive Examinations |
| ASTM E 1816 : 2012 | Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1629 : 2012 | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
| ASTM E 2191 : 2008 | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
| ASTM E 1316 : 2007 | Standard Terminology for Nondestructive Examinations |
| ASTM E 2075 : 2005 | Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod |
| ASTM E 1629 : 2012 : R2020 | Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
| ASTM E 1571 : 2006 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ASTM E 1781 : 1998 | Standard Practice for Secondary Calibration of Acoustic Emission Sensors |
| ASTM E 1816 : 1996 | Standard Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1816 : 2007 | Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
| ASTM E 1932 : 2012 : R2017 | Standard Guide for Acoustic Emission Examination of Small Parts |
| ASTM E 1606 : 1999 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes |
| ASTM E 1212 : 2004 : R2008 | Standard Practice for Quality Management Systems for Nondestructive Testing Agencies |
| ASTM E 1316 : 2012 | Standard Terminology for Nondestructive Examinations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.