ASTM E 6 : 2023 : REV A
Current
Current
The latest, up-to-date edition.
Standard Terminology Relating to Methods of Mechanical Testing
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
29-03-2023
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
E 28
|
| DocumentType |
Reference Material
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This terminology covers the principal terms relating to methods of mechanical testing of solids. The general definitions are restricted and interpreted, when necessary, to make them particularly applicable and practicable for use in standards requiring or relating to mechanical tests. These definitions are published to encourage uniformity of terminology in product specifications.
1.2Terms relating to fatigue and fracture testing are defined in Terminology E1823.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 1856 : 2013 : R2021 | Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
| ASTM E 190 : 2021 | Standard Test Method for Guided Bend Test for Ductility of Welds |
| ASTM D 6415/D6415M : 2022 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| ASTM F 3574 : 2022 | Standard Test Methods for Sacroiliac Joint Fusion Devices |
| ASTM D 5751 : 1999 : R2019 | Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products |
| ASTM C 1773 : 2021 | Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
| ASTM C 1341 : 2013 : R2018 | Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites |
| ASTM E 467 : 2021 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
| ASTM D 3518/D3518M : 2018 | Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
| ASTM C 749 : 2015 : R2020 | Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
| ASTM D 5961/D5961M : 2017 | Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
| ASTM E 604 : 2018 | Standard Test Method for Dynamic Tear Testing of Metallic Materials |
| ASTM C 1187 : 2020 : REV A | Standard Guide for Establishing Surveillance Test Program for Boron-based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in Pool Environment |
| ASTM D 2442 : 1975 : R2020 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
| ASTM D 7617/D7617M : 2011 : R2017 | Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
| ASTM D 6115 : 1997 : R2019 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM B 565 : 2020 | Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods |
| ASTM D 5448/D5448M : 2022 | Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 7078/D7078M : 2020 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
| ASTM F 2346 : 2018 | Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs |
| ASTM C 1291 : 2018 | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
| ASTM F 1044 : 2005 : R2017 : EDT 1 | Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings |
| ASTM E 1922/E1922M : 2022 | Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
| ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
| ASTM D 8066/D8066M : 2017 | Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates |
| ASTM C 1292 : 2022 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM D 6873/D6873M : 2019 | Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
| ASTM E 83 : 2023 | Standard Practice for Verification and Classification of Extensometer Systems |
| ASTM D 907 : 2015 | Standard Terminology of Adhesives |
| ASTM C 480/C480M : 2016 | Standard Test Method for Flexure Creep of Sandwich Constructions |
| ASTM E 633 : 2021 : REV A | Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing |
| ASTM C 1783 : 2015 | Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications |
| ASTM C 1323 : 2022 | Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature |
| ASTM E 647 : 2022 : REV B | Standard Test Method for Measurement of Fatigue Crack Growth Rates |
| ASTM D 7705/D7705M : 2012 : R2019 | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
| ASTM D 4255/D4255M : 2020 : EDT 1 | Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
| ASTM D 8131/D8131M : 2017 : EDT 1 | Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
| ASTM F 1147 : 2005 : R2017 : EDT 1 | Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
| ASTM D 7905/D7905M : 2019 : EDT 1 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM E 1237 : 2020 | Standard Guide for Installing Bonded Resistance Strain Gages |
| ASTM E 1561 : 2020 | Standard Practice for Analysis of Strain Gage Rosette Data |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM E 468 : 2018 | Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
| ASTM C 1835 : 2016 | Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures |
| ASTM F 3036 : 2021 | Standard Guide for Testing Absorbable Stents |
| ASTM D 7615/D7615M : 2019 | Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
| ASTM D 5449/D5449M : 2022 | Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM E 143 : 2020 | Standard Test Method for Shear Modulus at Room Temperature |
| ASTM F 2789 : 2010 : R2020 | Standard Guide for Mechanical and Functional Characterization of Nucleus Devices |
| ASTM C 1468 : 2019 : REV A | Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature |
| ASTM D 6671/D6671M : 2022 | Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
| ASTM E 132 : 2017 | Standard Test Method for Poisson’s Ratio at Room Temperature |
| ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
| ASTM D 2095 : 1996 : R2015 | Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens |
| ASTM C 1259 : 2021 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ASTM E 290 : 2022 | Standard Test Methods for Bend Testing of Material for Ductility |
| ASTM F 2193 : 2020 | Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System |
| ASTM D 7616/D7616M : 2011 : R2017 | Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
| ASTM C 1424 : 2015 : R2019 | Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature |
| ASTM F 2516 : 2022 | Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
| ASTM C 1499 : 2019 | Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature |
| ASTM D 7250/D7250M : 2020 | Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
| ASTM D 6484/D6484M : 2020 | Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
| ASTM C 1368 : 2018 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature |
| ASTM E 345 : 2016 | Standard Test Methods of Tension Testing of Metallic Foil |
| ASTM C 365/C365M : 2022 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
| ASTM D 2343 : 2017 | Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics |
| ASTM B 820 : 2018 | Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip |
| ASTM E 1949 : 2021 | Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages |
| ASTM C 1337 : 2017 | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
| ASTM D 8069 : 2017 : REV A | Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending |
| ASTM C 1366 : 2019 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
| ASTM C 1683 : 2010 : R2019 | Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics |
| ASTM B 647 : 2010 : R2016 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
| ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM D 8388/D8388M : 2022 | Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions |
| ASTM E 9 : 2019 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature |
| ASTM E 2712 : 2022 | Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet |
| ASTM C 67/C67M : 2023 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM E 2218 : 2015 | Standard Test Method for Determining Forming Limit Curves |
| ASTM E 2448 : 2022 | Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials |
| ASTM F 1582 : 1998 : R2016 | Standard Terminology Relating to Spinal Implants |
| ASTM D 7248/D7248M : 2021 | Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
| ASTM C 1525 : 2018 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
| ASTM D 8067/D8067M : 2017 | Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture |
| ASTM D 5528/D5528M : 2021 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 8454/D8454M : 2022 | Standard Test Method for Open-Hole Compressive Strength of Sandwich Constructions |
| ASTM C 297/C297M : 2016 | Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
| ASTM F 2842 : 2020 | Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing |
| ASTM F 2078 : 2022 | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| ASTM D 7136/D7136M : 2020 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
| ASTM D 7336/D7336M : 2022 | Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
| ASTM D 2559 : 2012 : REV A : R2018 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
| ASTM A 994 : 2018 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys |
| ASTM D 5262 : 2021 | Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes |
| ASTM D 7469 : 2022 | Standard Test Methods for End Joints in Structural Wood Products |
| ASTM D 3479/D3479M : 2019 | Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
| ASTM C 1361 : 2010 : R2019 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
| ASTM D 5572 : 1995 : R2019 | Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM B 1015 : 2020 | Standard Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloys |
| ASTM A 938 : 2018 | Standard Test Method for Torsion Testing of Wire |
| ASTM C 1576 : 2005 : R2017 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature |
| ASTM E 1426 : 2014 : R2019 : EDT 1 | Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques |
| ASTM D 8387/D8387M : 2021 | Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates |
| ASTM D 5467/D5467M : 1997 : R2017 | Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
| ASTM C 78/C78M : 2022 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ASTM C 1465 : 2008 : R2019 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
| ASTM E 855 : 2021 | Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading |
| ASTM F 1717 : 2021 | Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model |
| ASTM F 2077 : 2022 | Standard Test Methods for Intervertebral Body Fusion Devices |
| ASTM E 2207 : 2015 : R2021 | Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens |
| ASTM C 273/C273M : 2020 | Standard Test Method for Shear Properties of Sandwich Core Materials |
| ASTM E 1875 : 2020 : REV A | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance |
| ASTM E 328 : 2021 | Standard Test Methods for Stress Relaxation for Materials and Structures |
| ASTM C 1899 : 2021 | Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
| ASTM E 111 : 2017 | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| ASTM E 646 : 2016 | Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials |
| ASTM C 363/C363M : 2016 | Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
| ASTM D 6641/D6641M : 2016 : EDT 2 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
| ASTM D 5592 : 1994 : R2018 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| ASTM D 7264/D7264M : 2021 | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
| ASTM D 8337/D8337M : 2021 | Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test |
| ASTM E 754 : 1980 : R2022 | Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints |
| ASTM C 565 : 2015 : R2021 | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
| ASTM D 7565/D7565M : 2010 : R2017 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
| ASTM E 3097 : 2017 | Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
| ASTM D 5824 : 1998 : R2017 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 6416/D6416M : 2016 : EDT 1 | Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load |
| ASTM B 648 : 2010 : R2015 : EDT 1 | Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
| ASTM F 1624 : 2012 : R2018 | Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique |
| ASTM D 2344/D2344M : 2022 | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| ASTM C 773 : 1988 : R2020 | Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials |
| ASTM E 3246 : 2022 | Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials |
| ASTM C 394/C394M : 2016 | Standard Test Method for Shear Fatigue of Sandwich Core Materials |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1876 : 2022 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
| ASTM B 831 : 2022 | Standard Test Method for Shear Testing of Thin Aluminum Alloy Products |
| ASTM E 3098 : 2017 | Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
| ASTM D 6264/D6264M : 2017 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| ASTM D 5450/D5450M : 2022 | Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM E 238 : 2017 : REV A | Standard Test Method for Pin-Type Bearing Test of Metallic Materials |
| ASTM D 1676 : 2017 | Standard Test Methods for Film-Insulated Magnet Wire |
| ASTM D 953 : 2019 | Standard Test Method for Pin-Bearing Strength of Plastics |
| ASTM E 1319 : 2021 | Standard Guide for High-Temperature Static Strain Measurement |
| ASTM D 7846 : 2021 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites |
| ASTM F 2790 : 2010 : R2019 : EDT 1 | Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses |
| ASTM D 198 : 2022 : REV A | Standard Test Methods of Static Tests of Lumber in Structural Sizes |
| ASTM C 1674 : 2016 | Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures |
| ASTM C 1275 : 2018 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| ASTM E 92 : 2017 | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| ASTM D 3983 : 1998 : R2019 | Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen |
| ASTM C 1359 : 2018 : EDT 1 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures |
| ASTM A 135/A135M : 2021 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM E 1928 : 2013 : R2019 | Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing |
| ASTM D 7290 : 2006 : R2022 | Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
| ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
| ASTM C 1273 : 2018 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
| ASTM E 1823 : 2021 | Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 915 : 2021 | Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement |
| ASTM E 251 : 2020 : REV A | Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages |
| ASTM E 2899 : 2019 : EDT 1 | Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending |
| ASTM C 393/C393M : 2020 | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
| ASTM E 139 : 2011 : R2018 | Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
| ASTM E 2860 : 2020 | Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels |
| ASTM D 7956/D7956M : 2016 | Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
| ASTM D 7522/D7522M : 2021 | Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM C 1358 : 2018 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures |
| ASTM C 1557 : 2020 | Standard Test Method for Tensile Strength and Young's Modulus of Fibers |
| ASTM F 1160 : 2014 : R2017 : EDT 1 | Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings |
| ASTM C 1819 : 2021 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
| ASTM D 7291/D7291M : 2022 | Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
| ASTM C 1425 : 2019 | Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| ASTM D 7337/D7337M : 2012 : R2019 | Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM C 364/C364M : 2016 | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
| ASTM C 301 : 2018 : R2022 | Standard Test Methods for Vitrified Clay Pipe |
| ASTM B 557 : 2015 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| ASTM E 1685 : 2020 | Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique |
| ASTM E 1012 : 2019 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM C 140/C140M : 2022 : REV C | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1869 : 2018 | Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
| ASTM D 3410/D3410M : 2016 : EDT 1 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
| ASTM E 837 : 2020 | Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
| ASTM A 370 : 2022 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM B 950 : 2022 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
| ASTM E 209 : 2018 | Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates |
| ASTM C 1836 : 2016 | Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures |
| ASTM D 3930 : 2008 : R2015 | Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes |
| ASTM C 1239 : 2013 : R2018 | Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics |
| ASTM E 1450 : 2016 | Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium |
| ASTM E 292 : 2018 | Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials |
| ASTM F 19 : 2021 | Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals (Withdrawn 2023) |
| ASTM D 7766/D7766M : 2016 | Standard Practice for Damage Resistance Testing of Sandwich Constructions |
| ASTM C 469/C469M : 2022 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| ASTM G 129 : 2021 | Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking |
| ASTM D 5766/D5766M : 2011 : R2018 | Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
| ASTM E 517 : 2019 | Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal |
| ASTM E 2954 : 2015 : R2022 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
| ASTM B 557M : 2015 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric) |
| ASTM D 7205/D7205M : 2021 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM D 8453/D8453M : 2022 | Standard Practice for Open-Hole Flexural Strength of Sandwich Constructions |
| ASTM C 1360 : 2017 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM E 21 : 2020 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials |
| ASTM D 7914/D7914M : 2021 | Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
| ASTM E 2624 : 2017 | Standard Practice for Torque Calibration of Testing Machines |
| ASTM B 769 : 2011 : R2021 | Standard Test Method for Shear Testing of Aluminum Alloys |
| ASTM E 2428 : 2022 | Standard Practice for Calibration and Verification of Elastic Torque Measurement Standards |
| ASTM D 3039/D3039M : 2017 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM C 1863 : 2018 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization |
| ASTM D 7249/D7249M : 2020 | Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure |
| ASTM F 2502 : 2017 | Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants |
| ASTM C 1793 : 2015 | Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications |
| ASTM D 4896 : 2001 : R2016 | Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results |
| ASTM F 543 : 2017 | Standard Specification and Test Methods for Metallic Medical Bone Screws |
| ASTM D 7332/D7332M : 2022 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite |
| ASTM A 931 : 2018 | Standard Test Method for Tension Testing of Wire Ropes and Strand |
| ASTM C 1198 : 2020 | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance |
| ASTM D 5379/D5379M : 2019 : EDT 1 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| ASTM C 1469 : 2022 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
| ASTM D 6815 : 2022 : REV A | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 7137/D7137M : 2017 | Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
| ASTM D 4092 : 2021 | Standard Terminology for Plastics: Dynamic Mechanical Properties |
| ASTM D 6742/D6742M : 2017 | Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
| ASTM D 8287/D8287M : 2022 | Standard Test Method for Compressive Residual Strength Properties of Damaged Sandwich Composite Panels |
| ASTM F 3122 : 2014 : R2022 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| ASTM D 6856/D6856M : 2003 : R2016 | Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
| ASTM A 1084 : 2015 : REV A : R2022 | Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels |
| ASTM E 1823 : 2024 | Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 1823 : 2024 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 1823 : 2024 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 1823 : 2021 | Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 1823 : 2024 : REV C | Standard Terminology Relating to Fatigue and Fracture Testing |
| ASTM E 1823 : 2023 | Standard Terminology Relating to Fatigue and Fracture Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.