BIS IS 1363-1 : 2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)
Published date
12-01-2013
Publisher
Superseded date
09-11-2019
Superseded by
Sorry this product is not available in your region.
NATIONAL FOREWORD
1 Scope
2 Normative references
3 Dimensions
4 Specifications and reference standards
5 Designation
Bibliography
Describes the characteristics of hexagon head bolts with threads from M5 up to and including M64 of product grade C.
| Committee |
BPD 33
|
| DocumentType |
Standard
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 4016:2011 | Identical |
| BIS IS 10386-11 : 2012 | SAFETY CODE FOR CONSTRUCTION, OPERATION AND MAINTENANCE OF RIVER VALLEY PROJECTS - PART 11: UNDERGROUND EXCAVATION |
| BIS IS 5312-1 : 2004(R2009) | SWING CHECK TYPE REFLUX (NON-RETURN) VALVES FOR WATER WORKS PURPOSES - SPECIFICATION - PART 1: SINGLE-DOOR PATTERN |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BIS IS 807 : 2006 | DESIGN, ERECTION AND TESTING (STRUCTURAL PORTION) OF CANES AND HOISTS - CODE OF PRACTICE |
| BIS IS 15998 : 2013 | CAST IRON, SPHEROIDAL/NODULAR CAST IRON AND CAST STEEL SCREW-DOWN STOP VALVES AND STOP AND CHECK VALVES FOR MARINE APPLICATIONS - SPECIFICATION |
| BIS IS 6533-2 : 1989(R2003) | CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF STEEL CHIMNEY - PART 2: STRUCTURAL ASPECT |
| BIS IS 14846 : 2000 AMD 3 2010 | SLUICE VALVE FOR WATER WORKS PURPOSES (50 TO 1200 MM SIZE) - SPECIFICATION |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread — Product grades A and B |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| ISO 7412:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9 |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| ISO 7417:1984 | Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9 |
| ISO 4775:1984 | Hexagon nuts for high-strength structural bolting with large width across flats — Product grade B — Property classes 8 and 10 |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 4034:2012 | Hexagon regular nuts (style 1) — Product grade C |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread — Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 4017:2014 | Fasteners — Hexagon head screws — Product grades A and B |
| ISO 225:2010 | Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 7414:1984 | Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10 |
| ISO 7413:1984 | Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8 |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) — Product grade B |
| ISO 15071:2011 | Hexagon bolts with flange — Small series — Product grade A |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| ISO 7411:1984 | Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes 8.8 and 10.9 |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4014:2011 | Hexagon head bolts — Product grades A and B |
| ISO 4018:2011 | Hexagon head screws — Product grade C |
| ISO 4162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.