• Shopping Cart
    There are no items in your cart

BS 5546:2010

Current

Current

The latest, up-to-date edition.

Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kW net

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-06-2010

€322.53
Excluding VAT

Committee
GSE/30
DevelopmentNote
Supersedes BS 5546(2000) & 09/30166542 DC. (06/2010)
DocumentType
Standard
Pages
68
PublisherName
British Standards Institution
Status
Current
Supersedes

This British Standard specifies requirements for the selection, installation, inspection, commissioning and maintenance of gas-fired water-heating appliances, which have a rated heat input not exceeding 70kW, based on net calorific value. It applies to water-heating appliances utilizing 1st, 2nd or 3rd family gases designed to operate in the condensing or non-condensing mode for the supply of hot water for domestic purposes in domestic dwellings or domestic dwellings in commercial premises. This standard does not apply to: water-heating appliances with a rated input of over 70kW; hot water supply systems in multiple dwellings supplied from a central source. NOTE1 Groups of water-heating appliances with individual ratings of less than 70kW but with a maximum aggregate input of 70kW may be installed to this Standard but specialist advice on the system design, installation and control needs to be sought from the appliance manufacturer. It does not cover the detailed design and installation of the whole hot water distribution system, which was specified in BS5449. NOTE2 With the publication of EN12828, EN12831 and EN14336, BS5449 has been withdrawn. These European standards, which have now been adopted as British Standards, are not aligned to UK design and installation practices; they cover commercial as well as domestic heating systems and exclude hot water. Consequently, they have been amended to include national annexes covering all the relevant material from BS5449. This standard applies to water-heating appliances which carry a CE mark and also to previously used water-heating appliances which do not carry the CE mark (see 5.3.1). NOTE3 In this standard, heat input is expressed in terms of net calorific values (CV), unless stated otherwise. The ratio of gross to net heat input is approximately 1.11:1 for natural gas, 1.09:1 for propane, and 1.08:1 for butane. NOTE4 It is essential that persons carrying out the installation of any gas appliance be competent to do so (see Clause4). NOTE5 Some parts of this standard might be appropriate for the installation of pool and spa water-heating appliances. The manufacturer’s instructions may advise which parts are not appropriate.

10/30213917 DC : 0 BS 8660-1 - GAS-FIRED MICRO-COGENERATION APPLIANCES OF RATED THERMAL INPUT NOT EXCEEDING 70 KW NET - PART 1: SPECIFICATION FOR SELECTION, INSTALLATION, INSPECTION, COMMISSIONING, SERVICING AND MAINTENANCE OF STIRLING ENGINE MICRO-COGENERATION APPLIANCES
I.S. 327-3:1987 DOMESTIC INSTALLATIONS USING LIQUEFIED PETROLEUM GASES
13/30261683 DC : 0 BS 6798 - SPECIFICATION FOR SELECTION, INSTALLATION, INSPECTION, COMMISSIONING, SERVICING AND MAINTENANCE OF GAS-FIRED BOILERS OF RATED INPUT NOT EXCEEDING 70 KW NET
BS 7967:2015 Guide for the use of electronic portable combustion gas analysers for the measurement of carbon monoxide in dwellings and the combustion performance of domestic gas-fired appliances
BS 6798:2014 Specification for selection, installation, inspection, commissioning, servicing and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
I.S. 327-1:1987 DOMESTIC INSTALLATIONS USING LIQUEFIED PETROLEUM GASES
14/30258585 DC : 0 BS 7967 - GUIDE FOR THE USE OF ELECTRONIC PORTABLE COMBUSTION GAS ANALYSERS FOR THE MEASUREMENT OF CARBON MONOXIDE IN DWELLINGS AND THE COMBUSTION PERFORMANCE OF DOMESTIC GAS FIRED APPLIANCES
BS 8660-1:2011 Gas-fired micro-cogeneration appliances of rated thermal input not exceeding 70 kW net Specification for selection, installation, inspection, commissioning, servicing and maintenance of Stirling engine micro-cogeneration appliances
BS 5864:2010 Installation and maintenance of gas-fired ducted air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family gases). Specification

BS 6340-2:1983 Shower units Specification for the installation of shower units
BS 476-4:1970 Fire tests on building materials and structures Non-combustibility test for materials
BS 5386-1:1976 Specification for gas burning appliances Gas burning appliances for instantaneous production of hot water for domestic use
BS 1566-2:1984 Copper indirect cylinders for domestic purposes Specification for single feed indirect cylinders
BS 1179-6:1980 Glossary of terms used in the gas industry Combustion and utilization including installation at consumers\' premises
BS 5258-8:1980 Safety of domestic gas appliances Combined appliances: gas fire/back boiler
BS 7927:1998 Heating appliances for domestic applications. Portable apparatus designed to detect and measure specific combustion flue gas products. Requirements
BS 5386-2:1981 Specification for gas burning appliances Mini water heaters (2nd and 3rd family gases)
BS 6700(2006) : 2006 DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - SPECIFICATION
BS EN 12897:2016 Water supply. Specification for indirectly heated unvented (closed) storage water heaters
BS EN 14336:2004 Heating systems in buildings. Installation and commissioning of water based heating systems
BS EN 1490:2000 Building valves. Combined temperature and pressure relief valves. Tests and requirements
BS 7967-2:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances Guide for using electronic portable combustion gas analysers in the measurement of carbon monoxide and the determination of combustion performance
BS 6400-2:2006 Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h Medium pressure (2nd family gases)
PD 5482-3:2005 Code of practice for domestic butane and propane gas-burning installations Installations in boats, yachts and other vessels
BS 1212-2:1990 Float operated valves Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 7671(2008) : 2008 REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS
BS 6400-3:2007 Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h Low and medium pressure (3rd family gases)
BS 5258-7:1977 Safety of domestic gas appliances Storage water heaters
BS 1566-1(2002) : 2002 COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS
BS 5482-2:1977 Domestic butane- and propane-gas-burning installations Installations in caravans and non-permanent dwellings
BS 3198:1981 Specification for copper hot water storage combination units for domestic purposes
BS 5386-5:1988 Specification for gas burning appliances Specification for gas burning instantaneous water heaters with automatic output variation (2nd and 3rd family gases)
BS 5258-15:1990 Safety of domestic gas appliances Specification for combination boilers
BS 3632:2005 Residential park homes. Specification
BS EN 50379-3:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Performance requirements for apparatus used in non-statutory servicing of gas fired heating appliances
BS 5449:1990 Specification for forced circulation hot water central heating systems for domestic premises
BS EN 1443:2003 Chimneys. General requirements
CR 1472:1997 General guidance for the marking of gas appliances
BS 7967-3:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances Guide for responding to measurements obtained from electronic portable combustion gas analysers
BS EN 50291:2001 Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements
BS EN 1856-1:2009 Chimneys. Requirements for metal chimneys System chimney products
BS 8525-1:2010 Greywater systems Code of practice
BS EN 12828 : 2012 HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
BS 1179:1967 Glossary of terms used in the gas industry
BS 7967-1:2005 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances Guide for identifying and managing sources of fumes, smells, spillage/leakage of combustion products and carbon monoxide detector activation
BS EN 12831:2003 Heating systems in buildings. Method for calculation of the design heat load
BS 5422:2009 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40°C to +700°C
BS 1010-2:1973 Specification for draw-off taps and stopvalves for water services (screw-down pattern) Draw-off taps and above-ground stopvalves
PD CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
BS 5871-2:2005 Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances Inset live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back boilers (2nd and 3rd family gases)
BS 476-22:1987 Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction
BS 7967-4:2007 Carbon monoxide in dwellings and the combustion performance of gas-fired appliances Guide for using electronic portable combustion gas analysers as part of the process of servicing and maintenance of gas-fired appliances

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.