BS 5991:2006
Current
The latest, up-to-date edition.
Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases)
Hardcopy , PDF
English
20-07-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of appliances
5 General requirements
6 General conditions of test
7 Design and construction
8 Soundness
9 Heat input
10 Combustion
11 Ignition
12 Flame stability
13 Flue system
14 External temperatures
15 Heat exchanger: working life
16 Manual gas valves
17 Automatic controls
18 Motors and fans
19 Electricity supply
20 Manufacturer's instructions
21 Facilities for commissioning and testing
22 Identification and marking
23 Air handling
24 Combustion chamber pressure reliefs
25 Thermal efficiency
26 Air delivery volume
27 Weather resistance
Bibliography
Provides detailed requirements, including safety and performance requirements and methods of test, for indirect gas fired forced convection air heaters having heat inputs greater than 330 kW but not exceeding 2 MW, intended for industrial and commercial applications.
| Committee |
GSE/20
|
| DevelopmentNote |
Supersedes BS 5991(1989). (07/2006) Reviewed and confirmed by BSI, December 2011. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This British Standard specifies detailed requirements, including safety and performance requirements and methods of test, for indirect gas fired forced convection air heaters having heat inputs greater than 330 kW but not exceeding 2 MW, intended for industrial and commercial applications. Appliances covered by this standard are not intended for installation in domestic dwellings.
The scope of this standard includes indirect gas fired forced convection air heaters for use both with and without ducting, and intended primarily for space heating applications.
This standard also specifies the requirements for indirect gas fired forced convection air heaters designed for permanent outdoor installation.
It applies to appliances designed to operate on normal low pressure district supplies of 2nd family gas.
For appliances fitted with gas boosters and/or flue dampers, additional requirements may apply.
This standard does not apply to portable and transportable indirect gas fired forced convection air heaters.
| BS 6230:2011 | Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases) |
| BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
| BS EN 437 : 2003 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
| BS 10:1962 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 5986:1980 | Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW |
| BS 1179-6:1980 | Glossary of terms used in the gas industry Combustion and utilization including installation at consumers\' premises |
| BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
| BS EN 257:2010 | Mechanical thermostats for gas-burning appliances |
| BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 1092-2:1997 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Cast iron flanges |
| BS EN 61032:1998 | Protection of persons and equipment by enclosures. Probes for verification |
| BS EN 126:2012 | Multifunctional controls for gas burning appliances |
| BS 5000-11(1973) : 1973 | SPECIFICATION FOR ROTATING ELECTRICAL MACHINES OF PARTICULAR TYPES OR FOR PARTICULAR APPLICATIONS - PART 11: SMALL-POWER ELECTRIC MOTORS AND GENERATORS |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| BS EN 60730-2-9:2010 | Automatic electrical controls for household and similar use Particular requirements for temperature sensing controls |
| BS EN 1092-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
| BS EN 88:1991 | Pressure governors for gas appliances for inlet pressures up to 200 mbar |
| BS EN 161 : 2011 | AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads Taper external threads and taper internal threads. Dimensions, tolerances and designation |
| BS EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads Taper external threads and parallel internal threads. Dimensions, tolerances and designation |
| BS EN 125 : 2010 | FLAME SUPERVISION DEVICES FOR GAS BURNING APPLIANCES - THERMOELECTRIC FLAME SUPERVISION DEVICES |
| BS 1042-2.1:1983 | Measurement of fluid flow in closed conduits. Velocity area methods Method using Pitot static tubes |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
| BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| PD CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
| BS EN 60085:2008 | Electrical insulation. Thermal evaluation and designation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.