BS 6203:2003
Current
The latest, up-to-date edition.
Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
Hardcopy , PDF
English
23-04-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Relevant legislation and insurance requirements
5 Grades and types of expanded polystyrene boards
6 Fire characteristics
7 Fire test methods
8 Handling and storage recommendations
9 Procedure in the event of fire
Annex A (informative) Examples of locations of expanded
polystyrene materials in buildings - Guidance for
installation, fire hazards and protection
Annex B (normative) Unprotected expanded polystyrene ceiling
tiles, up to 12 mm thick, fixed to a substrate
Annex C (informative) Contribution to fire spread by expanded
polystyrene tiles up to 12 mm thick and veneers up
to 5 mm thick
Bibliography
Tables
Gives information on the fire characteristics and performance in fire tests of expanded polystyrene materials for use in building applications.
| Committee |
PRI/26
|
| DevelopmentNote |
Supersedes BS 6203(1991) and 98/125659 DC. (04/2003) Reviewed and confirmed by BSI, October 2008. (09/2008)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This British Standard provides information on the fire characteristics and performance in fire tests of expanded polystyrene materials for use in building applications. This standard illustrates a number of suitable constructions incorporating expanded polystyrene materials, including moulded and extruded products conforming to BS EN 13164 and BS EN 13165. This guide does not apply to expanded polystyrene materials with densities greater than 100 kg/m3.
This guide draws attention to the unsuitability of some standard fire test methods for certain applications of expanded polystyrene materials in buildings.
| BS 476-23:1987 | Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure |
| BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
| BS 7899-1:1997 | Code of practice for assessment of hazard to life and health from fire General guidance |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| BS 5588-9:1989 | Fire precautions in the design, construction and use of buildings Code of practice for ventilation and air conditioning ductwork |
| ISO 9705:1993 | Fire tests Full-scale room test for surface products |
| BS EN 13164 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| BS EN ISO 13943:2017 | Fire safety. Vocabulary |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| BS EN ISO 5659-2:2017 | Plastics. Smoke generation Determination of optical density by a single-chamber test |
| BS EN 13165 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| BS EN ISO 1182:2010 | Reaction to fire tests for products. Non-combustibility test |
| BS 476-3:1975 | Fire tests on building materials and structures External fire exposure roof test |
| BS 476-11:1982 | Fire tests on building materials and structures Method for assessing the heat emission from building materials |
| BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
| BS ISO 11925-2:1997 | Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Single flame source test |
| BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
| BS 476-13:1987 | Fire tests on building materials and structures Method of measuring the ignitability of products subjected to thermal irradiance |
| BS 476-21:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction |
| BS 476-33:1993 | Fire tests on building materials and structures Full-scale room test for surface products |
| BS 476-15:1993 | Fire tests on building materials and structures Method for measuring the rate of heat release of products |
| BS ISO TR 9122-5:1993 | Toxicity testing of fire effluents Prediction of toxic effects of fire effluents |
| BS EN ISO 1716:2010 | Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value) |
| BS 5422:1990 | Method for specifying thermal insulating materials on pipes, ductwork and equipment (in the temperature range -40°C to +700°C) |
| BS 4735:1974 | Laboratory method of test for assessment of the horizontal burning characteristics of specimens no larger than 150 mm x 50 mm x 13 mm (nominal) of cellular plastics and cellular rubber materials when subjected to a small flame |
| BS EN 13823 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| BS 476-22:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of non-loadbearing elements of construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.