BS 8301:1985
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Code of practice for building drainage
Hardcopy , PDF
15-06-1998
English
30-04-1985
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Committees responsible
Code of practice
Section one - General
1 Scope
2 Definitions
3 Exchange of information
4 Enactments and official recommendations
Section two - Materials and components
5 Materials and components
Section three - Design
6 General design considerations
7 Foul drainage
8 Surface water drainage
9 Combined drainage
10 Groundwater drainage
11 The structural design of drains
12 Provision of gullies, interceptors and anti-flooding devices
13 Access to drains
14 Ground movement
15 Sewage and surface water lifting installations
Section four - Work on site
16 Organization
17 Setting out
18 Trenching, excavation and timbering
19 Alternatives to trench construction
20 Pipe bedding and laying
21 Jointing pipes
22 Prevention of displacement of drains
23 Groundwater drains
24 Connections
Section five - Inspection, testing and maintenance
25 Inspection and testing of drainage works
26 Maintenance and periodic inspection
Appendices
A Bibliography
B Preparation of plans
C Background information on the discharge unit method for estimating
drain flow rates
D Compaction fraction test for suitability of bedding material
Index
Sets out recommendations for the design, layout, construction, testing and maintenance of foul, surface water and ground water drainage systems constructed in the ground under and around any buildings and their connection to sewers, treatment works, cesspools, soakaways or watercourses.
| Committee |
B/505
|
| DevelopmentNote |
Supersedes BS CP301(1971) Inactive for the new design. Supersedes 76/13530 DC & 88/15650 DC (07/2003)
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| BS 8000-14:1989 | Workmanship on building sites Code of practice for below ground drainage |
| BS EN 752-5:1998 | Drain and sewer systems outside buildings Rehabilitation |
| BS EN 752-1:1996 | Drain and sewer systems outside buildings Generalities and definitions |
| BS 5911-2:1982 | Precast concrete pipes, fittings and ancillary products Specification for inspection chambers |
| BS 5502-82:1997 | Buildings and structures for agriculture Code of practice for design of amenity buildings |
| BS 7158:2001 | Plastics inspection chambers for drains and sewers. Specification |
| BS 4428:1989 | Code of practice for general landscape operations (excluding hard surfaces) |
| BS 4962:1989 | Specification for plastics pipes and fittings for use as subsoil field drains |
| BS EN 752-3:1997 | Drain and sewer systems outside buildings Planning |
| BS 7913:1998 | Guide to the principles of the conservation of historic buildings |
| 05/30057907 DC : DRAFT SEP 2005 | BS 6465-1 - SANITARY INSTALLATIONS - PART 1: CODE OF PRACTICE FOR DESIGN OF SANITARY FACILITIES AND SCALE OF PROVISION OF SANITARY APPLIANCES |
| BS 5502-25:1991 | Buildings and structures for agriculture Code of practice for design and installation of services and facilities |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| 09/30168197 DC : 0 | BS 8102 - CODE OF PRACTICE FOR PROTECTION OF STRUCTURES FROM WATER FROM THE GROUND |
| I.S. 325-2:1995 | CODE OF PRACTICE FOR USE OF MASONRY - PART 2: MASONRY CONSTRUCTION |
| EN 752-4 : 1997 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PART 4: HYDRAULIC DESIGN AND ENVIRONMENTAL CONSIDERATIONS |
| BS 8010-2.1:1987 | Code of practice for pipelines. Pipelines on land: design, construction and installation Ductile iron |
| BS 8102:1990 | Code of practice for protection of structures against water from the ground |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS EN 752-2:1997 | Drain and sewer systems outside buildings Performance requirements |
| BS 6465-1:1994 | Sanitary installations Code of practice for scale of provision, selection and installation of sanitary appliances |
| BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
| BS 882:1992 | Specification for aggregates from natural sources for concrete |
| BS 5955-7:1983 | Plastics pipework (thermoplastics materials) Recommendations for methods of thermal fusion jointing |
| BS 1247:1975 | Specification for manhole step irons |
| BS 5481:1977 | Specification for unplasticized PVC pipe and fittings for gravity sewers |
| BS 3284:1967 | Specification for polythene pipe (Type 50) for cold water services |
| BS 5607:1998 | Code of practice for the safe use of explosives in the construction industry |
| BS 4622:1970 | Specification for grey iron pipes and fittings |
| BS 6100-6.3:1984 | Glossary of building and civil engineering terms. Concrete and plaster Aggregates |
| BS 5328:1981 | Methods for specifying concrete, including ready-mixed concrete |
| BS 6437:1984 | Specification for polyethylene pipes (type 50) in metric diameters for general purposes |
| BS 4118:1981 | Glossary of sanitation terms |
| BS 1198,1199,1200(1955) : LATEST | RENUMBERED BS 1199 & 1200 |
| BS 6209:1982 | Specification for solvent cement for non-pressure thermoplastics pipe systems |
| BS 5955-6:1980 | Plastics pipework (thermoplastics materials) Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers |
| BS CP2004(1972) : AMD 1755 | CODE OF PRACTICE FOR FOUNDATIONS |
| BS 6100-6.2:1986 | Glossary of building and civil engineering terms. Concrete and plaster Concrete |
| BS 6031:1981 | Code of practice for earthworks |
| BS 892:1967 | Glossary of highway engineering terms |
| BS 4248:1974 | Specification for supersulphated cement |
| BS 146-1(1958) : LATEST | |
| BS 5911-3:2002 | Concrete pipes and ancillary concrete products Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002) |
| BS 4346-1:1969 | Joints and fittings for use with unplasticized PVC pressure pipes Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply |
| BS 4211:1994 | Specification for ladders for permanent access to chimneys, other high structures, silos and bins |
| BS 5911-2:1982 | Precast concrete pipes, fittings and ancillary products Specification for inspection chambers |
| PD 6484:1979 | Commentary on corrosion at bimetallic contacts and its alleviation |
| BS 6073-1:1981 | Precast concrete masonry units Specification for precast concrete masonry units |
| BS 6100-5.3:1984 | Glossary of building and civil engineering terms. Masonry Bricks and blocks |
| BS 437:1978 | Specification for cast iron spigot and socket drain pipes and fittings |
| BS CP2005(1968) : LATEST | SEWERAGE |
| BS 3656:1981 | Specification for asbestos-cement pipes, joints and fittings for sewerage and drainage |
| BS 5573:1978 | Code of practice for safety precautions in the construction of large diameter boreholes for piling and other purposes |
| BS 146-2:1973 | Specification for Portland-blastfurnace cement. Metric units |
| BS 6297:1983 | Code of practice for design and installation of small sewage treatment works and cesspools |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
| BS 6367:1983 | Code of practice for drainage of roofs and paved areas |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS 534:1990 | Specification for steel pipes, joints and specials for water and sewage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.