BS EN 10346:2015
Current
The latest, up-to-date edition.
Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
Hardcopy , PDF
English
31-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Manufacturing and processing
7 Requirements
8 Inspection
9 Marking
10 Packing
11 Storage and transportation
Annex A (normative) - Reference method for determination
of the zinc, zinc-iron, zinc-aluminium, zinc-magnesium
and aluminium-zinc coating mass
Annex B (normative) - Reference method for determination
of the aluminium-silicon coating mass
Annex C (normative) - Method for determination of the mass
of the Al-Fe-Si alloy layer
Annex D (informative) - Technical changes from the previous
edition
Bibliography
Describes requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction,and of steels with high proof strength for cold forming and coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) or aluminium-silicon alloy (AS), and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc (Z) zinc-iron alloy (ZF) or zinc-aluminium alloy (ZA) with thicknesses of 0,20<= t < 3,0 mm.
| Committee |
ISE/109
|
| DevelopmentNote |
Supersedes BS EN 10292, BS EN 10326, BS EN 10327 & 07/30164802 DC. Together with BS EN 10152 supersedes BS EN 10336. (04/2009) Supersedes 13/30280395 DC. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for continuously hot-dip coated products made of low carbon steels for cold forming, of steels for construction and of steels with high proof strength for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ), aluminium-silicon alloy (AS) or zinc-magnesium alloy (ZM) and for continuously hot-dip coated products made of multiphase steels for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA) or zinc-magnesium alloy (ZM) in thicknesses of 0,20mm≤ t
| Standards | Relationship |
| EN 10346:2015 | Identical |
| BS 8612:2018 | Dry fixed ridge, hip, and verge systems for slating and tiling. Specification |
| BS 8499:2017 | Specification for domestic gas meter boxes and meter bracket |
| BS 1722-14:2017 | Fences Specification for open mesh steel panel |
| BS 5502-22(2003) : 2003 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
| 17/30324405 DC : 0 | BS 8612 - DRY-FIXED RIDGE, HIP, AND VERGE SYSTEMS FOR SLATING AND TILING - SPECIFICATION |
| 13/30262060 DC : 0 | BS 5502-22+A1 - BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
| BS 8499:2009 | Specification for domestic gas meter boxes and meter bracket |
| 16/30339191 DC : 0 | BS 8529 - COMPOSITE DOORSETS - DOMESTIC EXTERNAL DOORSETS - SPECIFICATION |
| BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
| PD 7974-3:2011 | Application of fire safety engineering principles to the design of buildings Structural response and fire spread beyond the enclosure of origin |
| BS 1245:2012 | Pedestrian doorsets and door frames made from steel sheet. Specification |
| 16/30270371 DC : 0 | BS 9101 - STEEL AND ALUMINIUM RAINWATER SYSTEMS - SPECIFICATION |
| BS 8529:2017 | Composite doorsets. Domestic external doorsets, Specification |
| 11/30142900 DC : 0 | BS 1245 - PEDESTRIAN DOORSETS AND DOOR FRAMES MADE FROM STEEL SHEET - SPECIFICATION |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| BIP 2198 : 2012 | CONCISE EUROCODE FOR DESIGN OF TIMBER STRUCTURES: BS EN 1995: EUROCODES 5 |
| BS 9101:2017 | Steel and aluminium rainwater systems. Specification |
| BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| ISO 10275:2007 | Metallic materials Sheet and strip Determination of tensile strain hardening exponent |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10049:2013 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 10113:2006 | Metallic materials Sheet and strip Determination of plastic strain ratio |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 606:2004 | Bar coding - Transport and handling labels for steel products |
| ISO 14713-2:2009 | Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
| EN 10325:2006 | Steel - Determination of yield strength increase by the effect of heat treatment [Bake-Hardening-Index] |
| EN ISO 14713-2:2009 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.