BS EN 12452:2012
Current
The latest, up-to-date edition.
Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
Hardcopy , PDF
English
31-05-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection
documentation
10 Marking, packaging, labelling
Annex A (normative) - Freedom from defects tests
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Pressure Equipment Directive (PED) 97/23/EC
Bibliography
Describes the composition, property requirements and tolerances on dimensions and form for rolled, finned, seamless copper and copper alloy tubes for heat exchangers.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes 96/708640 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for rolled, finned, seamless copper and copper alloy tubes for heat exchangers. It gives guidelines for copper and copper alloy tubes supplied in the size range from 6 mm up to and including 35 mm outside diameter; from 1 mm up to and including 3 mm wall thickness of the unfinned section; and with fin height up to and including 1,5 mm. The sampling procedures and the methods of testing for verification of conformity to the requirements of this European Standard are also specified.
| Standards | Relationship |
| NEN EN 12452 : 2012 | Identical |
| UNI EN 12452 : 2012 | Identical |
| NF EN 12452 : 2012 | Identical |
| SN EN 12452 : 2012 | Identical |
| EN 12452:2012 | Identical |
| NBN EN 12452 : 2012 | Identical |
| NS EN 12452 : 2012 | Identical |
| I.S. EN 12452:2012 | Identical |
| UNE-EN 12452:2013 | Identical |
| DIN EN 12452:2012-08 | Identical |
| BS 1566-1(2002) : 2002 | COPPER INDIRECT CYLINDERS FOR DOMESTIC PURPOSES - PART 1: OPEN VENTED COPPER CYLINDERS - REQUIREMENTS AND TEST METHODS |
| BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 853-1:1990+A3:2011 | Specification for vessels for use in heating systems Calorifiers and storage vessels for central heating and hot water supply |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 1971-2:2011 | Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner surface |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 16090:2011 | Copper and copper alloys - Estimation of average grain size by ultrasound |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| EN 1971-1:2011 | Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the outer surface |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 196:1978 | Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN ISO 196:1995 | Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.