EN 1655:1997
|
Copper and copper alloys - Declarations of conformity
|
EN ISO 15875-2:2003/A1:2007
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES
|
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
|
EN 12293:1999
|
Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling
|
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
|
EN ISO 15874-5:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2013)
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
|
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
|
EN ISO 15876-2:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
|
ISO 15875-5:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system
|
ISO 15875-2:2003
|
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
|
EN ISO 15876-5:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017)
|
EN ISO 21003-2:2008/A1:2011
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
|
ISO 21003-5:2008
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
|
EN 12449:2016
|
Copper and copper alloys - Seamless, round tubes for general purposes
|
ISO 15874-2:2013
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
|
ISO 22391-2:2009
|
Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 2: Pipes
|
EN 713:1993
|
Plastics piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending
|
EN ISO 15875-5:2003
|
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
ISO 21003-2:2008
|
Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
|
ISO 6509:1981
|
Corrosion of metals and alloys Determination of dezincification resistance of brass
|
ISO 15876-2:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
|
ISO 9001:2015
|
Quality management systems — Requirements
|
EN 12164:2016
|
Copper and copper alloys - Rod for free machining purposes
|
EN 12295:1999
|
Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling
|
ISO 9924-1:2016
|
Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
|
EN ISO 22391-2:2009
|
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009)
|
EN ISO 21003-5:2008
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)
|
EN 12294:1999
|
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
|
EN ISO 15874-2:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013)
|
EN ISO 6509 : 1995
|
CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS
|
EN 12165:2016
|
COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
|
ISO 15874-5:2013
|
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system
|
ISO 15876-5:2017
|
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
|
EN 1982:2017
|
Copper and copper alloys - Ingots and castings
|
ISO 6957:1988
|
Copper alloys Ammonia test for stress corrosion resistance
|
EN 712:1993
|
Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
|