BS EN 13071:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste
Hardcopy , PDF
31-03-2009
BS EN 13071-2:2008+A1:2013
BS EN 13071-1:2008
BS EN 13071-2 : 2008
English
06-04-2002
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General requirements for Type A containers
4.1.1 Design
4.1.2 Loading height
4.1.3 External surfaces/Edges
4.2 General requirements for Type B containers
5 Test conditions
5.1 General
5.2 Temperature requirements
5.3 Waste densities
6 Test procedures for Type A containers
6.1 Test procedures on empty containers
6.1.1 Stability test procedures
6.1.2 Resistance to interior impacts (only for
containers for glass)
6.1.3 Free fall test
6.2 Tests on loaded containers
6.2.1 Test load
6.2.2 Stability test
6.2.3 Verification of resistance to exterior
impacts
6.3 Miscellaneous tests
6.3.1 Emptying mechanism/Locking system (container
loaded)
6.3.2 Mechanical resistance of the lifting
components
6.3.3 Measurement of the sound level emitted by
the falling of glass inside the container
(for volumes greater or equal to 500 l)
6.3.4 Corrosion
6.3.5 Weathering (for thermoplastics only)
6.4 Sequence of tests
7 Data sheet
8 Marking and user information
8.1 Marking
8.2 User information
9 Test report
Annex A (normative) Noise test method for containers for
waste glass collection (Type A and Type B, 500 l)
A.1 Application field
A.2 Definitions
A.3 Test location
A.3.1 Test location criterion
A.3.2 Background noise criterion and correction
A.4 Apparatus
A.4.1 Test bottle
A.4.2 Instrumentation
A.5 Test method
A.6 Measurement of sound pressure levels
A.6.1 Measurement surface - positions and number
of measuring points
A.6.2 Measurement
A.7 Calculation of surface sound pressure level and of
A-weighted sound power level
A.7.1 A-weighted surface sound pressure level
A.7.2 Calculation of A-weighted sound power level
A.8 Measurement uncertainty
A.9 Information to be recorded
A.10 Information to be reported
Annex B (normative) Weathering tests
Bibliography
Defines the requirements for above-ground containers, mechanically lifted and emptied, used for the selective collection of solid non-hazardous waste, with capacities from 80 l to 5000 l.
Committee |
B/183
|
DevelopmentNote |
Supersedes 97/109597 DC (05/2002)
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NEN EN 13071 : 2002 | Identical |
UNE-EN 13071:2002 | Identical |
NF EN 13071 : 2002 | Identical |
UNI EN 13071 : 2002 | Identical |
I.S. EN 13071:2002 | Identical |
SN EN 13071 : 2002 | Identical |
NS EN 13071 : 1ED 2002 | Identical |
NBN EN 13071 : 2002 | Identical |
EN 13071 : 2002 | Identical |
DIN EN 13071:2002-05 | Identical |
04/30050096 DC : DRAFT NOV 2004 | BS 5906 - WASTE MANAGEMENT IN BUILDINGS - CODE OF PRACTICE |
BS 5906:2005 | Waste management in buildings. Code of practice |
EN 12574-1:2017 | Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
EN 840-4:2012 | Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design |
EN 22244 : 1992 | PACKAGING - COMPLETE, FILLED TRANSPORT PACKAGES - HORIZONTAL IMPACT TESTS (HORIZONTAL OR INCLINED PLANE TEST - PENDULUM TEST) |
EN 840-3:2012 | Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
EN 12574-3:2017 | Stationary waste containers - Part 3: Safety and health requirements |
ISO 2244:2000 | Packaging Complete, filled transport packages and unit loads Horizontal impact tests |
EN 12574-2:2017 | Stationary waste containers - Part 2: Performance requirements and test methods |
EN 840-1:2012 | Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design |
EN 22248:1992 | Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
EN ISO 877:1996 | Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
EN 840-2:2012 | Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design |
ISO 2248:1985 | Packaging Complete, filled transport packages Vertical impact test by dropping |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
EN 840-5:2012 | Mobile waste and recycling containers - Part 5: Performance requirements and test methods |
EN 840-6:2012 | Mobile waste and recycling containers - Part 6: Safety and health requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.