BS EN 133000:1997
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Harmonized system of quality assessment for electronic components. Generic specification: passive filter units for electromagnetic interference suppression
Hardcopy , PDF
01-03-2008
English
15-09-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 SCORE
2 GENERAL
2.1 Related documents
2.2 Units, symbols and terminology
2.3 Preferred values
2.4 Marking
3 QUALITY ASSESSMENT PROCEDURES
3.1 General
3.2 Primary stage of manufacture
3.3 Subcontracting
3.4 Structurally similar components
3.5 Qualification approval procedures
3.6 Capability approval procedure
3.7 Rework and repair work
3.8 Release of delivery
3.9 Certified test records
3.10 Delayed delivery
3.11 Alternative test methods
3.12 Unchecked parameters
4 TEST AND MEASUREMENT PROCEDURES
4.1 General
4.2 Standard atmospheric conditions for testing
4.3 Drying
4.4 Visual examination and check of dimensions
4.5 Insulation resistance
4.6 Voltage proof
4.7 Insertion loss
4.8 Resistance
4.9 Robustness of terminations
4.10 Resistance to soldering heat
4.11 Solderability
4.12 Rapid change of temperature
4.13 Vibration
4.14 Bump
4.15 Shock
4.16 Container sealing
4.17 Climatic sequence
4.18 Damp heat, steady state
4.19 Temperature rise
4.20 Current overload
4.21 Endurance
4.22 Charge and discharge test
4.23 Passive flammability
4.24 Active flammability
4.25 Solvent resistance of marking
4.26 Component solvent resistance
Filter units for use within, or associated with, electronic or electrical equipment and machines.
| Committee |
W/-
|
| DevelopmentNote |
Supersedes 91/34176 DC. Partially Supersedes BS 9120(1988), BS 9121(1988) and BS 9125(1988). (09/2005)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 133000 : 1997 | Identical |
| SN EN 133000 : 1997 | Identical |
| DIN EN 133000 : 1997 | Identical |
| I.S. EN 133000:1998 | Identical |
| EN 133000:1997 | Identical |
| IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
| CECC 00114-3 : 94 AMD 2 | CAPABILITY APPROVAL OF AN ELECTRONIC COMPONENT MANUFACTURING ACTIVITY |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| EN 130000 : 93 AMD 10 | FIXED CAPACITORS |
| EN 140000 : 1993 | GENERIC SPECIFICATION: FIXED RESISTORS |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
| IEC 60294:2012 | Measurement of the dimensions of a cylindrical component with axial terminations |
| EN 100114-1 : 1996 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60062:2016 | Marking codes for resistors and capacitors |
| IEC 60063:2015 | Preferred number series for resistors and capacitors |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| CISPR 17:2011 | Methods of measurement of the suppression characteristics of passive EMC filtering devices |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.