ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method |
ISO 8521:2009
|
Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Test methods for the determination of the apparent initial circumferential tensile strength |
ASTM D 3418 : 2015 : REDLINE
|
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
EN ISO 14021:2016
|
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
EN ISO 9809-3:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
EN ISO 1183-3 : 1999
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD |
CGA C 14 : 2005(R2010)
|
PROCEDURES FOR FIRE TESTING OF DOT CYLINDER PRESSURE RELIEF DEVICE SYSTEMS |
ISO 14245:2006
|
Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
EN ISO 75-3:2004/AC:2006
|
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004) |
EN 14140:2014/AC:2015
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
ISO 9809-3:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
EN ISO 3231:1997
|
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
ISO 2884-1:1999
|
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear |
EN ISO 9809-2:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ISO 14024:1999
|
Environmental labels and declarations Type I environmental labelling Principles and procedures |
ISO 14021:2016
|
Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
EN ISO 15512:2016
|
Plastics - Determination of water content (ISO 15512:2016) |
EN ISO 3146:2000/AC:2003
|
PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS |
EN ISO 75-1:2013
|
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
EN 1964-3:2000
|
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa |
EN ISO 7866:2012/AC:2014
|
GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014) |
ISO 3341:2000
|
Textile glass Yarns Determination of breaking force and breaking elongation |
ISO 11363-1:2010
|
Gas cylinders 17E and 25E taper threads for connection of valves to gas cylinders Part 1: Specifications |
EN ISO 9227:2017
|
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
ISO 1628-3:2010
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-3:2011
|
Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
ISO 16474-3:2013
|
Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
EN 1439:2017
|
LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling |
ISO 7866:2012
|
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
EN ISO 16474-3:2013
|
Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013) |
ISO 2555:1989
|
Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
EN ISO 2884-1:2006
|
Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999) |
EN ISO 14025:2010
|
Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
EN 3-7:2004+A1:2007
|
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
ISO 11114-2:2013
|
Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
ISO 15995:2006
|
Gas cylinders Specifications and testing of LPG cylinder valves Manually operated |
ISO 3146:2000
|
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
EN ISO 9809-1:2010
|
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
EN 1442:2017
|
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
EN ISO 11114-2:2013
|
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
ISO 1183-2:2004
|
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
ISO 9809-2:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
ISO 1183-3:1999
|
Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
ISO 10286:2007
|
Gas cylinders Terminology |
ISO 15512:2016
|
Plastics Determination of water content |
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests |
ASTM D 2290 : 2016-12
|
TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE |
ASTM D 4018 : 2017 : REDLINE
|
Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
EN 12807:2009
|
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction |
EN ISO 10286:2015
|
Gas cylinders - Terminology (ISO 10286:2015) |
ISO 14025:2006
|
Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
EN 14894:2013
|
LPG equipment and accessories - Cylinder and drum marking |
ISO 75-3:2004
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
ISO 9809-1:2010
|
Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
EN 13953:2015
|
LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
EN 14717:2005
|
Welding and allied processes - Environmental check list |
ISO 11363-2:2017
|
Gas cylinders — 17E and 25E taper threads for connection of valves to gas cylinders — Part 2: Inspection gauges |
EN ISO 15995:2010
|
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006) |
ISO 1133:2005
|
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
EN 13110:2012+A1:2017
|
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
EN ISO 1183-2:2004
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD |
ISO 3231:1993
|
Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
EN ISO 11439:2013
|
Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
ISO 11439:2013
|
Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
EN ISO 14245:2010
|
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006) |