BS EN 15566:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications. Railway rolling stock. Draw gear and screw coupling
Available format(s)
Hardcopy , PDF
Superseded date
04-01-2023
Superseded by
Language(s)
English
Published date
31-10-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
RAE/3/-/7
|
| DevelopmentNote |
Supersedes 13/30241415 DC. (10/2016)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This standard specifies the requirements for the draw gear and screw coupling for the end of rolling stock that has to couple with other rolling stock (freight wagons, locomotives, passenger vehicles ...).
This standard covers the functionality, construction, interfaces and testing including pass/fail criteria for draw gear and screw coupling.
The standard describes three categories of classification of draw gear and screw coupling, (1MN, 1,2MN and 1,5MN).
Coupling systems between permanent coupled vehicle units are not in the scope of this standard.
| Standards | Relationship |
| EN 15566:2016 | Identical |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| UIC 520 : 7ED 2003 | WAGONS, COACHES AND VANS - DRAW GEAR - STANDARDISATION |
| ISO 815-2:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures |
| EN 10079:2007 | Definition of steel products |
| ISO 813:2016 | Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| UIC 827-1 : 2ED 1990 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ELASTOMER COMPONENTS FOR BUFFERS |
| EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
| EN 15085-1:2007+A1:2013 | Railway applications - Welding of railway vehicles and components - Part 1: General |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| UIC B36 RP 32 : 1989 | CHARACTERISTICS OF THE BUFFING AND DRAW GEAR OF WAGONS TO ENSURE THE SAFE RUNNING OF LONG VEHICLES IN SMALL RADIUS CURVES |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN 15839:2012+A1:2015 | Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN 15085-5:2007 | Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation |
| EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| UIC B51 RP 27 : 1995 | DESIGN AND TESTING OF NEW DRAW GEAR FOR WAGONS |
| UIC 825 : 4ED 1985 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF DRAW HOOKS WITH NOMINAL LOAD EQUAL TO 250 KN, 600 KN OR 1000 KN FOR TRACTIVE AND TRAILING STOCK |
| PREN 16839 : DRAFT 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| UIC 827-2 : 3ED 1981 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF STEEL RINGS FOR BUFFER SPRINGS |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 15020:2006+A1:2010 | Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| EN 15085-2:2007 | Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer |
| UIC 826 : 3ED 2004 | TECHNICAL PROVISIONS FOR THE SUPPLY OF SCREW COUPLINGS FOR TRACTIVE AND TRAILING STOCK |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| EN 15085-4:2007 | Railway applications - Welding of railway vehicles and components - Part 4: Production requirements |
| ISO 4968:1979 | Steel Macrographic examination by sulfur print (Baumann method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.