BS EN 50110-1:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Operation of electrical installations General requirements
Hardcopy , PDF
04-07-2023
English
30-04-2013
Committee |
PEL/99
|
DevelopmentNote |
Supersedes 93/201063 DC. (09/2005)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This European Standard is applicable to all operation of and work activity on, with, or near electrical installations. These are electrical installations operating at voltage levels from and including extra-low voltage up to and including high voltage.
This latter term includes those levels referred to as medium and extra-high voltage.
These electrical installations are designed for the generation, transmission, conversion, distribution and use of electrical power. Some of these electrical installations are permanent and fixed, such as a distribution installation in a factory or office complex, others are temporary, such as on construction sites and others are mobile or capable of being moved either whilst energised or whilst not energised nor charged. Examples are electrically driven excavating machines in quarries or open-cast coal sites.
This European Standard sets out the requirements for the safe operation of and work activity on, with, or near these electrical installations. The requirements apply to all operational, working and maintenance procedures. They apply to all non-electrical work activities such as building work near to overhead lines or underground cables as well as electrical work activities, when there is a risk of electrical danger.
This European Standard does not apply to ordinary persons when using installations and equipment, provided that the installations and equipment comply with relevant standards and are designed and installed for use by ordinary persons.
This European Standard has not been developed specifically to apply to the electrical installations listed below. However, if there are no other rules or procedures, the principles of this European Standard could be applied to them
on any aircraft and hovercraft moving under its own power, (these are subject to International Aviation laws which take precedence over national laws in these situations);
on any sea going ship moving under its own power, or under the direction of the master, (these are subject to International Marine laws which take precedence over national laws in these situations);
electronic telecommunications and information systems;
electronic instrumentation, control and automation systems;
at coal or other mines;
on off-shore installations subject to International Marine laws;
on vehicles;
on electric traction systems;
on experimental electrical research work.
Standards | Relationship |
NEN EN 50110-1 : 2013 | Identical |
NF EN 50110-1 : 2013 | Identical |
DIN EN 50110-1 : 2014-02 | Identical |
UNE-EN 50110-1:2014 | Identical |
NBN EN 50110-1 : 2013 | Identical |
I.S. EN 50110-1:2013 | Identical |
EN 50110-1:2013 | Identical |
SN EN 50110-1 : 2013 | Identical |
BS 6423:2014 | Code of practice for maintenance of low-voltage switchgear and controlgear |
BS 6867:2013 | Maintenance of electrical switchgear and controlgear for voltages above 36 kV. Code of practice |
BS 6626:2010 | Maintenance of electrical switchgear and controlgear for voltages above 1 kV and up to and including 36 kV. Code of practice |
13/30174947 DC : 0 | BS 6867 - MAINTENANCE OF ELECTRICAL SWITCHGEAR AND CONTROLGEAR FOR VOLTAGES ABOVE 36 KV - CODE OF PRACTICE |
IEC 61477:2009 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
IEC 61219:1993 | Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device - Lance earthing |
IEC 60832-1:2010 | Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks |
IEC 61472:2013 | Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
IEC 60895:2002 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c. |
IEC 60984:2014 | Live working - Electrical insulating sleeves |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
EN 61472:2013/AC:2015 | LIVE WORKING - MINIMUM APPROACH DISTANCES FOR A.C SYSTEMS IN THE VOLTAGE RANGE 72,5 KV TO 800 KV - A METHOD OF CALCULATION (IEC 61472:2013) |
IEC 60855:1985 | Insulating foam-filled tubes and solid rods for live working |
IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
EN 61219:1993 | Live working - Earthing or earthing and short-circuiting equipment using lances as short-circuiting device - Lance earthing |
EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
EN 61112:2009 | Live working - Electrical insulating blankets |
EN 60832-2:2010 | Live working - Insulating sticks and attachable devices - Part 2: Attachable devices |
IEC 60832-2:2010 | Live working - Insulating sticks and attachable devices - Part 2: Attachables devices |
EN 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
EN 62271-102:2002/AC:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES (IEC 62271-102:2001/A2:2013) |
EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
IEC 60743:2013 | Live working - Terminology for tools, devices and equipment |
EN 61236:2011 | Live working - Saddles, stick clamps and their accessories |
EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
IEC 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
IEC 61236:2010 | Live working - Saddles, stick clamps and their accessories |
EN 50191:2010 | ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT |
EN 60743:2013 | Live working - Terminology for tools, devices and equipment |
IEC 61111:2009 | Live working - Electrical insulating matting |
IEC 61229:1993+AMD1:1998+AMD2:2002 CSV | Rigid protective covers for live working on a.c. installations |
IEC 61482-1-1:2009 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ATPV or E<sub>BT50</sub>) of flame resistant materials for clothing |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
EN 50340:2010 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
EN 61477:2009/corrigendum:2010 | LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 60832-1:2010 | Live working - Insulating sticks and attachable devices - Part 1: Insulating sticks |
EN 60071-1:2006/A1:2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
IEC 61230:2008 | Live working - Portable equipment for earthing or earthing and short-circuiting |
IEC 60900:2012 | Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. |
EN 61235:1995 | Live working - Insulating hollow tubes for electrical purposes |
EN 60895:2003 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
EN 60900:2012 | LIVE WORKING - HAND TOOLS FOR USE UP TO 1000 V A.C. AND 1500 V D.C. (IEC 60900:2012) |
IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 50522:2010 | Earthing of power installations exceeding 1 kV a.c. |
IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
EN 60984 : 2014 | LIVE WORKING - ELECTRICAL INSULATING SLEEVES |
EN 60855:1996 | Insulating foam-filled tubes and solid rods for live working |
EN 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
EN 61229:1995/A2:2002 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
CLC/TR 50488:2006 | Railway applications - Safety measures for the personnel working on or near overhead contact lines |
IEC 60903:2014 | Live working - Electrical insulating gloves |
EN 61482-1-1 : 2009 | LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC - PART 1-1: TEST METHODS - METHOD 1: DETERMINATION OF THE ARC RATING (ATPV OR E[BT50]) OF FLAME RESISTANT MATERIALS FOR CLOTHING |
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV | High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches |
IEC 61112:2009 | Live working - Electrical insulating blankets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.