BS EN 573-3:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products
Available format(s)
Hardcopy , PDF
Superseded date
05-09-2019
Superseded by
BS EN 573-3:2019+A1:2022
BS EN 573-3:2019
BS EN 573-3:2019+A2:2023
Language(s)
English
Published date
31-10-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Chemical composition limits
4 Writing rules
5 Alloy designations
6 Sequence of elements
7 Rounding rules for determination of compliance
Annex A (normative) - Form of products
Annex B (normative) - Guidelines for the introduction
of new wrought aluminium and wrought aluminium
alloys in CEN/TC 132 standards
Bibliography
Describes the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
| Committee |
NFE/35
|
| DevelopmentNote |
Supersedes BS 1471(1972), BS 1472(1972), BS 1474(1987), BS 4300-12(1969), BS 4300-15(1973), BS 4300-4(1973), BS 1470(1987), 91/47493 DC and 98/719160 DC. Supersedes BS EN 573-4. (09/2007) Supersedes 08/30186451 DC. (05/2009)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This European Standard specifies the chemical composition limits of wrought aluminium and wrought aluminium alloys and form of products.
The chemical composition limits of aluminium and aluminium alloys specified herein are completely identical with those registered with the Aluminum Association, 1525, Wilson Boulevard, Suite 600, Arlington, VA 22209, USA, for the corresponding alloys.
Guidelines for the introduction of new wrought aluminium and wrought aluminium alloys in standards are presented in Annex B.
| Standards | Relationship |
| ONORM EN 573-3 : 2013 | Identical |
| SN EN 573-3 : 2013 | Identical |
| I.S. EN 573-3:2013 | Identical |
| DIN EN 573-3:2013-12 | Identical |
| NS EN 573-3 : 2013 | Identical |
| NEN EN 573-3 : 2013 | Identical |
| UNI EN 573-3 : 2013 | Identical |
| EN 573-3:2013 | Identical |
| NF EN 573-3 : 2013 | Identical |
| UNE-EN 573-3:2014 | Identical |
| NBN EN 573-3 : 2013 | Identical |
| DEFSTAN 02-120/2(2002) : INTERIM | REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-831(PT3)/2(2012) : 2012 | REQUIREMENTS FOR ALUMINIUM ALLOY PRODUCT HELD BY NAVAL STORES - PART 3: TUBES (EXCLUDING GUARD RAIL TUBES) |
| 06/30094360 DC : DRAFT JAN 2006 | BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION |
| BS EN 604-1:1997 | Aluminium and aluminium alloys. Cast forging stock Technical conditions for inspection and delivery |
| DEFSTAN 03-3/4(2008) : 2008 | PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS |
| DEFSTAN 02-860/1(2010) : 2010 | REQUIREMENTS FOR THE DESIGN AND MANUFACTURE OF PORTABLE FIRE EXTINGUISHERS |
| DEFSTAN 80-115/2(1999) : 1999 | ADHESIVE FOR AFFIXING PAPER LABELS TO ALUMINIUM |
| DEFSTAN 02-128/2(2008) : 2008 | FURNITURE AND ASSOCIATED EQUIPMENT REQUIREMENTS FOR HM SHIPS |
| 05/30135982 DC : DRAFT JUL 2005 | BS 715 - SPECIFICATION FOR METAL FLUE BOXES FOR GAS FIRED APPLIANCES NOT EXCEEDING 20 KW |
| 08/30176707 DC : DRAFT APR 2008 | BS 336 - SPECIFICATION FOR FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| DEFSTAN 02-313/1(2000) : 2000 AMD 1 2002 | DIESEL ENGINES FOR MARINE PROPULSION AND AUXILIARY MACHINERY |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 7412:2002 | Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS 4592-1:2006 | Industrial type flooring and stair treads Metal open bar gratings. Specification |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| DEFSTAN 03-3/5(2011) : 2011 | PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS |
| DEFSTAN 81-93/3(2005) : 2005 | PAPER, WRAPPING GREASE-RESISTING |
| DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 79-18/2(2001) : 2001 | CLEANING FLUID FOR COMPRESSORS OF GAS TURBINE ENGINES |
| DEFSTAN 02-121(PT1)/3(2010) : 2010 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-831(PT2)/2(2012) : 2012 | REQUIREMENTS FOR ALUMINIUM ALLOY PRODUCT HELD BY NAVAL STORES - PART 2: EXTRUDED SECTIONS (INCLUDING STANDARD EXTRUSIONS AND SPECIAL EXTRUSIONS) |
| DEFSTAN 02-860(PT1)/1(2003) : 2003 | REQUIREMENTS FOR THE DESIGN AND MANUFACTURE OF PORTABLE FIRE EXTINGUISHERS - PART 1: SHOCK SUPPORT BRACKETS |
| BS 715:2005 | Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW |
| BS 1703:2005 | Refuse chutes and hoppers. Specification |
| BS 7818:1995 | Specification for pedestrian restraint systems in metal |
| DEFSTAN 02-130/2(2012) : 2012 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 81-93/2(1997) : 1997 | PAPER, WRAPPING GREASE-RESISTING |
| DEFSTAN 81-093/5(2017) : 2017 | GREASE RESISTING MATERIALS FOR GENERAL PACKAGING |
| DEFSTAN 80-115/3(2004) : 2004 | ADHESIVE FOR AFFIXING PAPER LABELS TO ALUMINIUM |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| BS EN 603-1:1997 | Aluminium and aluminium alloys. Wrought forging stock Technical conditions for inspection and delivery |
| BS EN 604-2:1997 | Aluminium and aluminium alloys. Cast forging stock Tolerances on dimensions and form |
| BS EN 603-2:1997 | Aluminium and aluminium alloys. Wrought forging stock Mechanical properties |
| EN 485-4:1993 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
| 04/30085945 DC : DRAFT NOV 2004 | BS 1703 - REFUSE CHUTES AND HOPPERS - SPECIFICATION |
| DEFSTAN 03-3/3(2002) : 2002 | PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS |
| DEFSTAN 02-121(PT1)/2(2006) : 2006 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES - PART 1: COMMON REQUIREMENTS |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 06/30143171 DC : DRAFT SEP 2006 | BS 7412 - PLASTICS WINDOWS AND DOORSETS MADE FROM UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) EXTRUDED HOLLOW PROFILES |
| DEFSTAN 02-831(PT1)/2(2012) : 2012 | REQUIREMENTS FOR ALUMINIUM ALLOY PRODUCT HELD BY NAVAL STORES - PART 1: SHEET, STRIP AND PLATE (INCLUDING PERFORATED SHEET) |
| DEFSTAN 02-840/2(2010) : 2010 | REQUIREMENTS FOR ALUMINIUM ALLOY PATTERNED TREADPLATE AND TREADSTRIP |
| DEFSTAN 02-522/2(2004) : 2004 | VERSATILE CONSOLE SYSTEM (VCS) ENGINEERING MANUAL - CATEGORY 2 |
| DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-900(PT0)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-900(PT0)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| EN 1715-2:2008 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications |
| EN 13957:2008 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
| EN 1301-2:2008 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| EN 851:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 683-2:2006 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
| EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 13981-2:2004 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| TEAL 1 : 2015 | INTERNATIONAL ALLOY DESIGNATIONS AND CHEMICAL COMPOSITION LIMITS FOR WROUGHT ALUMINUM AND WROUGHT ALUMINUM ALLOYS |
| EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 570:2007 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
| EN 541:2006 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 13958:2008 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
| EN 13981-1:2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN 14286:2008 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| EN 14121:2009 | Aluminium and aluminium alloys - Sheet, strip and plate for electrotechnical applications |
| EN 941:2014 | Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN 13981-4:2006 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| EN 1386:2007 | Aluminium and aluminium alloys - Tread plate - Specifications |
| EN 1592-2:1997 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1715-4:2008 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
| EN 546-2:2006 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
| EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 1715-3:2008 | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
| EN 603-2:1996 | Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.