BS EN 62271-209:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
High-voltage switchgear and controlgear Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV. Fluid-filled and extruded insulation cables. Fluid-filled and dry-type cable-terminations
Hardcopy , PDF
21-03-2022
BS EN IEC 62271-209:2019
BS EN 60601-2-20:2009+A11:2011
BS EN IEC 62271-209:2019+A1:2022
English
29-02-2008
1 Scope
2 Normative references
3 Terms and definitions
4 Limits of supply
4.1 General
4.2 Over-voltage protection
5 Rating
5.1 General
5.2 Rated voltage
5.3 Rated insulation level
5.4 Rated normal current and temperature rise
5.5 Rated short-time and peak withstand currents and rated
duration of short circuit
5.6 Rated filling pressure of insulating gas in the cable
connection enclosure
6 Design and construction requirements
6.1 Pressure withstand requirements
6.2 Mechanical forces on cable-terminations
7 Standard dimensions
7.1 Fluid-filled cable-terminations
7.2 Dry-type cable-terminations
7.3 Three-phase cable-termination enclosure
8 Tests
8.1 General
8.2 Dielectric type tests of cable-terminations
8.2.1 General
8.2.2 Dielectric type test of cable-terminations in a single
phase enclosure
8.2.3 Dielectric type test of cable-termination in a three
phase enclosure
8.3 Tests after cable system installation
9 Information to be given with enquiries, tenders and orders
10 Rules for transport, storage, erection, operation and maintenance
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Annex ZB (informative) - A-deviations
Defines the connection assembly of fluid-filled and extruded cables to gas-insulated metal enclosed switchgear (GIS), in single- or three-phase arrangements where the cable-terminations are fluid-filled or dry type and there is a separating insulating barrier between the cable insulation and the gas insulation of the switchgear.
Committee |
PEL/17
|
DevelopmentNote |
Supersedes BS 6904(1987). (02/2008)
|
DocumentType |
Standard
|
Pages |
20
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This standard covers the connection assembly of fluid-filled and extruded cables to gas-insulated metal enclosed switchgear (GIS), in single- or three-phase arrangements where the cable-terminations are fluid-filled or dry type and there is a separating insulating barrier between the cable insulation and the gas insulation of the switchgear.
Standards | Relationship |
NF EN 62271-209 : 2008 | Identical |
IEC 62271-209:2007 | Identical |
EN 62271-209:2007 | Identical |
I.S. EN 62271-209:2007 | Identical |
IEC 62864-1:2016 | Identical |
BS 7912(2012) : 2012 | POWER CABLES WITH XLPE INSULATION AND METAL SHEATH, AND THEIR ACCESSORIES, FOR RATED VOLTAGES FROM 66 KV (U[M] = 72.5 KV) TO 132 KV (U[M] = 145 KV) |
12/30244367 DC : 0 | BS 7912 - POWER CABLES WITH XLPE INSULATION AND METAL SHEATH, AND THEIR ACCESSORIES, FOR RATED VOLTAGES FROM 66 KV (U[M] = 72.5 KV) TO 132 KV (U[M] = 145 KV) |
IEC 60038:2009 | IEC standard voltages |
IEC 62067:2011 RLV | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (<em>U</em><sub>m</sub> = 170 kV) up to 500 kV (<em>U</em><sub>m</sub> = 550 kV) - Test methods and requirements |
EN 62271-203:2012 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
IEC 62271-203:2011 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
IEC 60141-1:1993 | Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.