EN 1859:2009+A1:2013
|
Chimneys - Metal chimneys - Test methods
|
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV
|
Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
|
IEC 60730-2-9:2015 RLV
|
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
|
EN ISO 8256:2004
|
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
|
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
|
EN 1490:2000
|
Building valves - Combined temperature and pressure relief valves - Tests and requirements
|
EN 60730-2-9:2010
|
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
|
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
|
EN 13203-1:2015
|
Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
|
EN 13216-1:2004
|
Chimneys - Test methods for system chimneys - Part 1: General test methods
|
ISO 188:2011
|
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
|
EN 13203-2:2015
|
Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength
|
EN ISO 3166-1:2014
|
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
|
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
|
EN ISO 179-1:2010
|
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
|
EN 161:2011+A3:2013
|
Automatic shut-off valves for gas burners and gas appliances
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
|
EN 14241-1:2013
|
Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
|
ISO 1183:1987
|
Plastics Methods for determining the density and relative density of non-cellular plastics
|
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
|
EN 14459:2015
|
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
|
EN 1487:2014
|
Building valves - Hydraulic safety groups - Tests and requirements
|
EN 437:2003+A1:2009
|
Test gases - Test pressures - Appliance categories
|
EN 125:2010+A1:2015
|
Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
|
ISO 7619:1997
|
Rubber Determination of indentation hardness by means of pocket hardness meters
|
EN 126:2012
|
Multifunctional controls for gas burning appliances
|
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
|
CEN/TR 1749:2014
|
European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
|
CR 1404:1994
|
Determination of emissions from appliances burning gaseous fuels during type-testing
|
EN ISO 9969:2016
|
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
|
EN 60335-2-102:2016
|
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
|
ISO 6914:2013
|
Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
|
EN 14471:2013+A1:2015
|
CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
|
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
ISO 3166-1:2013
|
Codes for the representation of names of countries and their subdivisions Part 1: Country codes
|
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
EN 298:2012
|
Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
|
EN 1856-1:2009
|
Chimneys - Requirements for metal chimneys - Part 1: System chimney products
|
EN 549:1994
|
Rubber materials for seals and diaphragms for gas appliances and gas equipment
|
ISO 301:2006
|
Zinc alloy ingots intended for castings
|
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
ISO 9969:2016
|
Thermoplastics pipes Determination of ring stiffness
|
EN 513:1999
|
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
|
EN 88-1:2011+A1:2016
|
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
|
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
|
EN 573-1:2004
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles
|
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|
ISO 2781:2008
|
Rubber, vulcanized or thermoplastic Determination of density
|