EN 13216-1:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Chimneys - Test methods for system chimneys - Part 1: General test methods
01-05-2019
01-09-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test environment and measurement parameters
4.1 Location of test chimneys
4.2 Test environment
4.3 Location for the measurement of ambient air condition
4.4 Accuracy of measurement
5 Performance tests for system chimneys, material independent
5.1 General
5.2 Abrasion resistance test
5.2.1 Test apparatus
5.2.2 Test sample
5.2.3 Measuring parameters
5.2.4 Test procedure
5.2.5 Test results
5.3 Relative movement of the flue liner in multi-wall system
chimneys
5.3.1 Test apparatus
5.3.2 Test sample
5.3.3 Measuring parameters
5.3.4 Test procedure
5.3.5 Test results
5.4 Gas tightness test
5.4.1 Test apparatus
5.4.2 Test sample
5.4.3 Measuring parameters
5.4.4 Test procedure
5.4.5 Test results
5.5 Condensate resistance test
5.5.1 Test apparatus
5.5.2 Test sample
5.5.3 Measuring parameters
5.5.4 Test procedure
5.5.5 Test results
5.6 Vapour and condensate resistance test
5.6.1 Test apparatus
5.6.2 Test sample
5.6.3 Measuring parameters
5.6.4 Test procedure
5.6.5 Test results
5.7 Thermal performance test
5.7.1 General
5.7.2 Test apparatus and test structure for thermal
and thermal shock tests
5.7.3 Test sample
5.7.4 Measuring parameters
5.7.5 Test procedure
5.7.6 Test results
5.8 Thermal resistance test
5.8.1 Test apparatus
5.8.2 Test sample
5.8.3 Measuring parameters
5.8.4 Test procedure
5.8.5 Test results
5.9 Terminal flow resistance
5.9.1 Test apparatus
5.9.2 Test sample
5.9.3 Measuring parameters
5.9.4 Test procedure
5.9.5 Test results
5.10 Aerodynamic behaviour of terminal under wind
conditions
5.10.1 Test apparatus
5.10.2 Test sample
5.10.3 Measuring parameters
5.10.4 Test procedure
5.10.5 Test results
5.11 Flow resistance of the test chimney, of fittings or
liners
5.11.1 Test apparatus
5.11.2 Test sample
5.11.3 Measuring parameter
5.11.4 Test procedure
5.11.5 Test results
5.12 Rainwater resistance for chimney sections
5.12.1 Test apparatus
5.12.2 Test sample
5.12.3 Test procedure
5.12.4 Measuring parameters
5.12.5 Test results
5.13 Rainwater resistance for terminals
5.13.1 Test apparatus
5.13.2 Test sample
5.13.3 Test procedure
5.13.4 Measuring parameters
5.13.5 Test results
5.14 Test report
Annex A (informative) Recommended test sequence
Annex B (normative) Calculation method to predict
condensation in multi-wall chimneys
for different ambient air temperatures
others than the test ambient air
temperature
B.1 Dimensions of the chimney structure type
B.2 Calculation of the flue gas and inner wall
temperatures
B.2.1 Calculation without taking account of
condensation heat
B.2.2 Calculation with taking account of
condensation heat
B.3 Calculation of layer temperatures
B.4 Thermal resistance, test chimney
B.5 Multi-wall chimney, back ventilated
B.5.1 General requirement
B.5.2 Removed moisture flow
B.5.3 Penetrating moisture flow
B.5.4 Maximum moisture flow
B.5.5 Layer temperatures
B.5.6 Calculation of the frictional and form resistance
of the ventilation ducts, from a test chimney
B.5.7 Moisture flow at test chimney
B.5.8 Expression of results
B.6 Multi-wall chimneys without back-ventilation, designated W
B.6.1 General requirement
B.6.2 Partial pressures
B.6.3 Variations in partial pressure in critical planes
B.6.4 Penetrating moisture flow
B.6.5 Condensation water penetration
B.6.6 Layer temperatures
B.6.7 Calculation of the variations in partial pressure in
the chimney structure, height-dependent
B.6.8 Expression of results
Annex C (informative) Methods of determining the effects of extract
and air supply provisions
Annex D (normative) Method of measuring the hot gas temperature
Annex E (informative) Hot gas mass flow, heat capacity of the flue
gas, example of air velocity for natural gas
combustion
Annex F (informative) Example of a test report
Bibliography
This document specifies material-independent general test methods for system chimneys.
Committee |
CEN/TC 166
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
I.S. EN 13216-1:2019 | Identical |
NBN EN 13216-1 : 2004 | Identical |
SN EN 13216-1 : 2004 | Identical |
UNI EN 13216-1 : 2006 | Identical |
NEN EN 13216-1 : 2019 | Identical |
PN EN 13216-1 : 2005 | Identical |
I.S. EN 13216-1:2004 | Identical |
UNE-EN 13216-1:2006 | Identical |
NS EN 13216-1 : 1ED 2004 | Identical |
BS EN 13216-1:2004 | Identical |
NF EN 13216-1 : 2005 | Identical |
NEN EN 13216-1 : 2004 | Identical |
PN-EN 13216-1 : 2019-05 | Identical |
ONORM EN 13216-1 : 2004 | Identical |
DIN EN 13216-1:2004-11 | Identical |
07/30170132 DC : 0 | BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS EN 16475-3 : 2016 | CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS, STANDSTILL OPENING DEVICES AND COMBINED SECONDARY AIR DEVICES - REQUIREMENTS AND TEST METHODS |
PREN 1859 : DRAFT 2008 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
I.S. EN 15502-2-1:2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
I.S. EN 16497-2:2017 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
17/30353865 DC : 0 | BS EN 1443 - CHIMNEYS - GENERAL REQUIREMENTS |
I.S. EN 14989-2:2007 | CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR ROOM SEALED APPLIANCES |
UNE-EN 13501-2:2009 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
BS EN 13063-2:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions |
BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
BS EN 13063-3:2007 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys |
UNE-EN 14989-2:2011 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
BS EN 14989-1:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances |
I.S. EN 89:2015 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
DIN EN 13063-3:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS |
CEN/TS 16134:2011 | Chimney terminals - General requirements and material independent test methods |
DIN EN 15502-2-1:2017-09 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
EN 13063-1:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance |
I.S. EN 16475-2:2017 | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
UNI CEN/TS 16134:2011 | CHIMNEY TERMINALS - GENARAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS EN 16497-2:2017 | Chimneys. Concrete System Chimneys Balanced flue applications |
10/30217031 DC : 0 | EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
16/30332891 DC : DRAFT JAN 2016 | BS EN 16475-6 - CHIMNEYS - ACCESSORIES - PART 6: ACCESS COMPONENTS - REQUIREMENTS AND TEST METHODS |
11/30250549 DC : 0 | BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
PREN 14471 : DRAFT 2011 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
UNI EN 15287-2 : 2008 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOM-SEALED APPLIANCES |
EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
DIN EN 89:2015-08 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
DIN EN 1858:2016-08 (Draft) | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
I.S. EN 14471:2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
I.S. EN 1858:2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
I.S. EN 13063-2:2005 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
DIN EN 1859:2013-07 | Chimneys - Metal chimneys - Test methods (includes Amendment A1:2013) |
I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
DIN EN 1857:2010-08 | Chimneys - Components - Concrete flue liners |
I.S. EN 13501-2:2016 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
I.S. EN 13063-1:2006 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
I.S. EN 1857:2010 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
I.S. EN 1859:2009 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
DIN EN 15502-2-1:2013-01 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
BS EN 15287-2:2008 | Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances |
04/30115682 DC : DRAFT JUN 2004 | EN 14989-1 - CHIMNEYS AND AIR SUPPLY DUCT SYSTEMS FOR ROOMSEALED APPLIANCES - REQUIREMENTS AND TEST METHODS - PART 1: VERTICAL TERMINALS FOR C6-TYPE APPLIANCES |
15/30302476 DC : 0 | BS EN 13501-2 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
BS EN 16497-1:2015 | Chimneys. Concrete System Chimneys Non-balanced flue applications |
05/30136031 DC : 0 | EN 15287-1 - CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
BS EN 15502-2-1 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
PREN 1443 : DRAFT 2017 | CHIMNEYS - GENERAL REQUIREMENTS |
S.R. CEN/TS 16134:2011 | CHIMNEY TERMINALS - GENERAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
BS EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
DIN EN 1858:2011-09 | Chimneys - Components - Concrete flue blocks |
UNI EN 1857 : 2010 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
UNI EN 1859 : 2013 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
UNI EN 1858 : 2012 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
DIN EN 16497-1:2015-05 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
BS EN 14989-2:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Flue and air supply ducts for room sealed appliances |
DIN EN 16475-2:2013-08 (Draft) | CHIMNEYS - ACCESSORIES - PART 2: CHIMNEY FANS - REQUIREMENTS AND TEST METHODS |
10/30218935 DC : 0 | BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
08/30183125 DC : 0 | BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
14/30304113 DC : 0 | BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
07/30156246 DC : 0 | BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
I.S. EN 15287-2:2008 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES |
16/30344387 DC : 0 | BS EN 16475-1 - CHIMNEYS - ACCESSORIES - PART 1: CHIMNEY SILENCERS - REQUIREMENTS AND TEST METHODS |
17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS EN 15035:2006 | Heating boilers. Special requirements for oil fired room sealed units up to 70 kW |
UNE-EN 1857:2013 | Chimneys - Components - Concrete flue liners |
BS EN 1858 : 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
BS EN 13501-2 : 2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
BS EN 1857 : 2003 | CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS |
BS EN 13063-1:2005 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for sootfire resistance |
BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
UNE-EN 1858:2011 | Chimneys - Components - Concrete flue blocks |
UNE-EN 1859:2010 | Chimneys - Metal chimneys - Test methods |
UNE-EN 89:2016 | Gas-fired storage water heaters for the production of domestic hot water |
UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
EN 16497-2:2017 | Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications |
EN 14471:2013+A1:2015 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
EN 14989-2:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
EN 14989-1:2007 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
EN 15287-2:2008 | Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances |
EN 15035:2006 | Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
EN 1857:2010 | Chimneys - Components - Concrete flue liners |
EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
EN 1858:2008+A1:2011 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
EN 16475-2:2017 | Chimneys - Accessories - Part 2: Chimney fans - Requirements and test methods |
EN 16497-1:2015 | Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications |
EN 1859:2009+A1:2013 | Chimneys - Metal chimneys - Test methods |
DIN EN 15287-2:2008-06 | Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances |
I.S. EN 16475-3:2016 | CHIMNEYS - ACCESSORIES - PART 3: DRAUGHT REGULATORS, STANDSTILL OPENING DEVICES AND COMBINED SECONDARY AIR DEVICES - REQUIREMENTS AND TEST METHODS |
12/30266154 DC : 0 | BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
I.S. EN 16497-1:2015 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
08/30194466 DC : 0 | BS EN 1859 - CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
BS EN 16475-2:2017 | Chimneys. Accessories Chimney fans. Requirements and test methods |
PREN 13501-2 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
DIN EN 16497-2:2017-07 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
XP CEN/TS 16134 : 2011 XP | CHIMNEY TERMINALS - GENERAL REQUIREMENTS AND MATERIAL INDEPENDENT TEST METHODS |
EN 16475-3:2016 | Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods |
BS EN 1859 : 2009 | CHIMNEYS - METAL CHIMNEYS - TEST METHODS |
EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
EN 13063-2:2005+A1:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions |
DIN EN 14989-2:2008-03 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
DIN EN 13063-1:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE |
DIN EN 13063-2:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS |
DIN EN 483:2000-06 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
DIN EN 14989-1:2007-05 | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances |
DIN EN 15035:2007-05 | Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
EN 13384-1:2015 | Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
BS 1042-2.1:1983 | Measurement of fluid flow in closed conduits. Velocity area methods Method using Pitot static tubes |
EN 1443:2003 | Chimneys - General requirements |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.