BS EN 894-4:2010
Current
The latest, up-to-date edition.
Safety of machinery. Ergonomics requirements for design of displays and control actuators Location and arrangement of displays and control actuators
Hardcopy , PDF
English
31-07-2010
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles for location and arrangement of displays and
control actuators
5 Phases and steps for location and arrangement of displays
and control actuators
Annex A (informative) - Dimensions for sitting and standing
consoles
Annex B (informative) - Coding Methods
Annex C (informative) - Suitability of Colour Combinations
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Defines ergonomic requirements for the location and arrangement of displays and control actuators in order to avoid hazards associated with their use.
Committee |
PH/9
|
DocumentType |
Standard
|
Pages |
49
|
PublisherName |
British Standards Institution
|
Status |
Current
|
This European Standard contains ergonomic requirements for the location and arrangement of displays and control actuators in order to avoid hazards associated with their use.
This European Standard applies to displays and control actuators for machinery and other interactive equipment (e.g. devices and installations, instrument panels, control and monitoring consoles).
This European Standard is not applicable to the location and arrangement of displays and control actuators which are manufactured before the date of its publication as EN.
Standards | Relationship |
EN 894-4:2010 | Identical |
EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
ISO 9241-11:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability |
EN ISO 7250-1:2017 | Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017) |
EN ISO 9241-110:2006 | Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006) |
EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
ISO 9241-110:2006 | Ergonomics of human-system interaction Part 110: Dialogue principles |
EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
EN ISO 9241-11:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
ISO 3411:2007 | Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
EN 61310-3:2008 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
ISO 11064-4:2013 | Ergonomic design of control centres — Part 4: Layout and dimensions of workstations |
IEC 61310-3:2007 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2004) |
ISO 7250-1:2017 | Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks |
EN ISO 11064-4:2013 | Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) |
EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
ISO 11428:1996 | Ergonomics Visual danger signals General requirements, design and testing |
EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 8201:1987 | Acoustics Audible emergency evacuation signal |
ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
EN ISO 14738:2008 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.