BS EN ISO 10380:2012
Current
The latest, up-to-date edition.
Pipework. Corrugated metal hoses and hose assemblies
Hardcopy , PDF
English
31-10-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design requirements
5 Performance requirements and tests
6 Evaluation of conformity
7 Installation instructions, packaging,
designation and marking
Annex A (normative) - Equivalent European
material specifications
Bibliography
Describes the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies.
| Committee |
GSE/42
|
| DevelopmentNote |
Partially supersedes BS 6501-1(1991) Supersedes 01/703999 DC (04/2003) Supersedes 11/30218155 DC. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies the minimum requirements for the design, manufacture, testing and installation of corrugated metal hose and metal hose assemblies.
| Standards | Relationship |
| SN EN ISO 10380 : 2012 | Identical |
| NBN EN ISO 10380 : 2012 | Identical |
| NEN EN ISO 10380 : 2012 | Identical |
| I.S. EN ISO 10380:2012 | Identical |
| EN ISO 10380:2012 | Identical |
| UNE-EN ISO 10380:2013 | Identical |
| DIN EN ISO 10380:2013-02 | Identical |
| UNI EN ISO 10380 : 2012 | Identical |
| ISO 10380:2012 | Identical |
| NS EN ISO 10380 : 2012 | Identical |
| NF EN ISO 10380 : 2012 | Identical |
| 04/30089331 DC : DRAFT JUL 2004 | BS 8446 - SPECIFICATION FOR THE INSTALLATION OF FLUED, NON-DOMESTIC LAUNDRY GAS-FIRED LAUNDRY APPLIANCES |
| BS 8446:2005 | Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances |
| BS 6400-1:2006 | Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h Low pressure (2nd family gases) |
| 11/30229801 DC : 0 | BS 6644 - SPECIFICATION FOR THE INSTALLATION OF GAS-FIRED HOT WATER BOILERS OF RATED INPUTS BETWEEN 70 KW (NET) AND 1.8 MW (NET) (2ND AND 3RD FAMILY GASES) |
| BS 6644(2005) : 2005 | SPECIFICATION FOR INSTALLATION OF GAS-FIRED HOT WATER BOILERS OF RATED INPUTS BETWEEN 70 KW (NET) AND 1.8 MW (NET) (2ND AND 3RD FAMILY GASES) |
| BS 6891:2015 | Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises |
| BS 6501-1:2004 | Metal hose assemblies Guidance on the construction and use of corrugated hose assemblies |
| BS 6644:2011 | Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases) |
| BS 6230:2011 | Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases) |
| PD 54823:2016 | Guidance for the design, commissioning and maintenance of LPG systems in small craft |
| 06/30148066 DC : DRAFT DEC 2006 | BS 8487 - DESIGN AND CONSTRUCTION OF GAS BOOSTERS USED IN ASSOCIATION WITH COMBUSTION EQUIPMENT - SPECIFICATION |
| BS 8487(2007) : 2007 | THE DESIGN AND CONSTRUCTION OF GAS BOOSTERS USED IN ASSOCIATION WITH COMBUSTION EQUIPMENT - SPECIFICATION |
| 11/30229803 DC : 0 | BS 6230 - SPECIFICATION FOR INSTALLATION OF GAS-FIRED FORCED CONVECTION AIR HEATERS FOR COMMERCIAL AND INDUSTRIAL SPACE HEATING (2ND AND 3RD FAMILY GASES) |
| 03/105322 DC : DRAFT APR 2003 | BS 6501-1 - FLEXIBLE METAL HOSE ASSEMBLIES - PART 1: GUIDANCE ON THE CONSTRUCTION AND USE OF CORRUGATED HOSE ASSEMBLIES |
| 05/30086662 DC : DRAFT JAN 2005 | BS 6400-2 - SPECIFICATION FOR THE INSTALLATION, EXCHANGE, RELOCATION AND REMOVAL OF DOMESTIC-SIZED GAS METERS (2ND AND 3RD FAMILY GASES) - PART 2: MEDIUM PRESSURE (2ND FAMILY GASES) |
| ISO 9724:1992 | Nickel and nickel alloy wire and drawing stock |
| ISO 9723:1992 | Nickel and nickel alloy bars |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| ISO 6208:1992 | Nickel and nickel alloy plate, sheet and strip |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 13133:2000 | Brazing - Brazer approval |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 10806:2003 | Pipework Fittings for corrugated metal hoses |
| ISO 7369:2004 | Pipework Metal hoses and hose assemblies Vocabulary |
| ISO 9328-7:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels |
| ISO 6317:2008 | Hot-rolled carbon steel strip of commercial and drawing qualities |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.