BS EN ISO 12402-7 : 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2007
20-10-2020
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and components
Annex A (informative) - Mildew resistance of materials:
Soil burial method
Annex B (informative) - Abrasion resistance of cloth:
Oscillatory method (Wyzenbeek method)
Annex C (informative) - Example of a design drawing
Annex ZA (informative) - Relationship between this
International Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
Describes the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.
| Committee |
PH/3/6
|
| DevelopmentNote |
Supersedes 02/564504 DC. (06/2007) 2007 Edition Re-Issued in July 2011 & incorporates AMD 1 2011. (07/2011)
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 12402-7:2006 | Identical |
| DIN EN ISO 12402-7:2015-08 (Draft) | Identical |
| I.S. EN ISO 12402-7:2006 | Identical |
| NS EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
| NF EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
| NEN EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
| NBN EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
| ONORM EN ISO 12402-7 : 2015 | Identical |
| UNE-EN ISO 12402-7:2007 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 12402-5:2006 | Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements |
| ISO 13934-2:2014 | Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method |
| ISO 9073-4:1997 | Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance |
| ISO 6330:2012 | Textiles — Domestic washing and drying procedures for textile testing |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| ISO 12402-3:2006 | Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 13938-2:1999 | Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| ISO 12402-1:2005 | Personal flotation devices — Part 1: Lifejackets for seagoing ships — Safety requirements |
| ISO 2062:2009 | Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester |
| ISO 12402-2:2006 | Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements |
| ISO 1926:2009 | Rigid cellular plastics — Determination of tensile properties |
| ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
| ISO 5470-2:2003 | Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader |
| ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |
| ISO 7229:2015 | Rubber- or plastics-coated fabrics — Measurement of gas permeability |
| ISO 12402-6:2006 | Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods |
| ISO 12402-4:2006 | Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements |
| FED-STD-191 Revision A:1978 | Textile Test Methods |
| ISO 105-X12:2016 | Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing |
| ISO 12402-10:2006 | Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 105-A02:1993 | Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| ISO 13938-1:1999 | Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ISO 105-B02:2014 | Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.