BS EN ISO 4892-1:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plastics. Methods of exposure to laboratory light sources General guidance
Hardcopy , PDF
25-10-2024
English
31-05-2016
Committee |
PRI/21
|
DevelopmentNote |
Renumbers and supersedes BS 2782-5.540D(1999). Supersedes 96/122244 DC. (10/2001) 2001 Version incorporates amendment 13148 to BS 2782-5.540D(1999). Supersedes BS 2782-5.540D(1995). (10/2005) Supersedes 14/30253068 DC. (05/2016)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This part of ISO4892 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing plastics to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated weathering or artificial accelerated irradiation devices. NOTE In this part of ISO4892 , the term “light source” refers to radiation sources that emit UV radiation, visible radiation, infrared radiation or any combination of these types of radiation. This part of ISO4892 also provides information on the interpretation of data from artificial accelerated weathering or artificial accelerated irradiation exposures. More specific information about methods for determining the change in the properties of plastics after exposure and reporting these results is given in ISO4582 .
Standards | Relationship |
DIN EN ISO 4892-1:2001-09 | Identical |
NS EN ISO 4892-1 : 2000 | Identical |
NBN EN ISO 4892-1 : 2016 | Identical |
UNI EN ISO 4892-1 : 2002 | Identical |
DIN EN ISO 4892-1:2016-10 | Identical |
ISO 4892-1:2016 | Identical |
UNE-EN ISO 4892-1:2017 | Identical |
NEN EN ISO 4892-1 : 2016 | Identical |
SN EN ISO 4892-1 : 2001 | Identical |
EN ISO 4892-1:2016 | Identical |
I.S. EN ISO 4892-1:2016 | Identical |
NF EN ISO 4892-1 : 2016 | Identical |
14/30247416 DC : 0 | BS AU 145E - SPECIFICATION FOR RETROREFLECTING NUMBER PLATES |
BS 8442:2006 | Miscellaneous road traffic signs and devices. Requirements and test methods |
DEFSTAN 81-147/1(2017) : 2017 | WATER-VAPOUR RESISTANT MATERIAL AND BAGS FOR PACKAGING |
DEFSTAN 81-101/3(2016) : 2016 | REUSABLE WATER VAPOUR RESISTANT BAGS FOR ENGINE CHANGE UNITS, PROPULSION UNITS, AND ASSOCIATED EQUIPMENT |
BS 8408:2005 | Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification |
DEFSTAN 00-035(PT3)/5(2017) : 2017 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS |
ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
ISO 3167:2014 | Plastics Multipurpose test specimens |
ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
ISO 294-2:1996 | Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars |
ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
ASTM G 130 : 2012 : REDLINE | Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer |
ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.