BS EN ISO 8178-5:1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
15-08-1999
Publisher
Superseded date
30-06-2009
Superseded by
€277.04
Excluding VAT
Defines fuels recommended for performance of the exhaust emission test cycles as defined in ISO 8178-4. Applies to reciprocating internal combustion engines for mobile, transportable and stationary installations, not including engines for motor vehicles mainly intended for road use. Applicable to engines such as earth-moving machines, generating sets and other uses.
| Committee |
MCE/14
|
| DevelopmentNote |
Supersedes 94/714926 DC (06/2005)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 8178-5:1998 | Identical |
| NF EN ISO 8178-5 : 1997 | Identical |
| NS EN ISO 8178-5 : 1ED 1997 | Identical |
| ISO 8178-5:2015 | Identical |
| NBN EN ISO 8178-5 : 1998 | Identical |
| EN ISO 8178-5 : 1997 | Identical |
| NEN EN ISO 8178-5 : 1997 | Identical |
| DIN EN ISO 8178-5:1999-03 | Identical |
| ISO 3016:1994 | Petroleum products — Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 3993:1984 | Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method |
| EN ISO 3830:1995 | Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993) |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| ISO 8691:1994 | Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
| EN 41 : 1975 | DETERMINATION OF THE SULFUR CONTENT OF PETROLEUM PRODUCTS BY THE WICKBOLD COMBUSTION METHOD |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| IP 364 : 1984 | CALCULATED CETANE INDEX OF DIESEL FUELS |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method |
| ASTM D 189 : 2006 : EDT 1 | Standard Test Method for Conradson Carbon Residue of Petroleum Products |
| ASTM D 3244 : 2016-06 | PRACTICE FOR UTILIZATION OF TEST DATA TO DETERMINE CONFORMANCE WITH SPECIFICATIONS |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| ISO 4264:2007 | Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation |
| DIN 51413-7:1990-05 | TESTING OF LIQUID MINERAL OIL HYDROCARBONS - ANALYSIS BY GAS CHROMATOGRAPHY - DETERMINATION OF OXYGENATES AND THE OXYGEN CONTENT - PROCEDURE BY OXYGEN-SPECIFIC DETECTOR (O-FID) |
| ISO 5165:1998 | Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method |
| EN ISO 6326-5:1997 | Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) |
| ISO 3837:1993 | Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method |
| EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017, Corrected version 2024-09) |
| EN ISO 3993:1995 | Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984) |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| ISO 8178-1:2017 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| ISO 7536:1994 | Petroleum products — Determination of oxidation stability of gasoline — Induction period method |
| ISO 3007:1999 | Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
| EN 24260:1994 | Petroleum products and hydrocarbons - Determination of sulfur content - Wickbold combustion method (ISO 4260:1987) |
| ISO 8754:2003 | Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry |
| ISO 3735:1999 | Crude petroleum and fuel oils — Determination of sediment — Extraction method |
| ISO 4260:1987 | Petroleum products and hydrocarbons — Determination of sulfur content — Wickbold combustion method |
| EN 25163 : 1993 | MOTOR AND AVIATION TYPE FUELS - DETERMINATION OF KNOCK CHARACTERISTICS - MOTOR METHOD |
| ISO 10478:1994 | Petroleum products — Determination of aluminium and silicon in fuel oils — Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| EN ISO 8178-1 : 1996 | RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| ISO 7941:1988 | Commercial propane and butane — Analysis by gas chromatography |
| ISO 2160:1998 | Petroleum products — Corrosiveness to copper — Copper strip test |
| EN 12 : 1993 | PETROLEUM PRODUCTS - DETERMINATION OF REID VAPOUR PRESSURE - WET METHOD |
| EN ISO 10370:2014 | Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014) |
| ISO 8216-1:2017 | Petroleum products — Fuels (class F) classification — Part 1: Categories of marine fuels |
| ISO 6615:1993 | Petroleum products — Determination of carbon residue — Conradson method |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| ISO 8217:2017 | Petroleum products — Fuels (class F) — Specifications of marine fuels |
| EN ISO 3735:1999 | Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
| EN 589:2008+A1:2012 | Automotive fuels - LPG - Requirements and test methods |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ASTM D 4530 : 2015 : REDLINE | Standard Test Method for Determination of Carbon Residue (Micro Method) |
| ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
| ASTM D 2785 : 1980 | Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987) |
| ASTM D 2598 : 2016 : REDLINE | Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis |
| ASTM D 4420 : 1994 | Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography) |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| EN 27941:1993 | Commercial propane and butane - Analysis by gas chromatography (ISO 7941:1988) |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| ISO 6296:2000 | Petroleum products — Determination of water — Potentiometric Karl Fischer titration method |
| ISO 4259:2006 | Petroleum products — Determination and application of precision data in relation to methods of test |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN ISO 7536:1996 | Petroleum products - Determination of oxidation stability of gasoline - Induction period method (ISO 7536:1994) |
| ISO 3830:1993 | Petroleum products — Determination of lead content of gasoline — Iodine monochloride method |
| ISO 8973:1997 | Liquefied petroleum gases — Calculation method for density and vapour pressure |
| ASTM D 3237 : 2017 : REDLINE | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| EN 23015:1994 | Petroleum products - Determination of cloud point (ISO 3015:1992) |
| ISO 4256:1996 | Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method |
| ASTM D 5186 : 2015 : REDLINE | TEST METHOD FOR DETERMINATION OF THE AROMATIC CONTENT AND POLYNUCLEAR AROMATIC CONTENT OF DIESEL FUELS AND AVIATION TURBINE FUELS BY SUPERCRITICAL FLUID CHROMATOGRAPHY |
| EN 7 : 1974 | DETERMINATION OF ASH FROM PETROLEUM PRODUCTS |
| EN 22719 : 1993 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| ISO 3405:2011 | Petroleum products — Determination of distillation characteristics at atmospheric pressure |
| ISO 6326-5:1989 | Natural gas — Determination of sulfur compounds — Part 5: Lingener combustion method |
| ISO 3105:1994 | Glass capillary kinematic viscometers — Specifications and operating instructions |
| EN ISO 4256:1998 | Liquefied petroleum gases - Determination of gauge pressure - LPG method (ISO 4256:1996) |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ISO 4262:1993 | Petroleum products — Determination of carbon residue — Ramsbottom method |
| ASTM D 3341 : 2016 : REDLINE | Standard Test Method for Lead in Gasoline—Iodine Monochloride Method |
| ASTM D 2274 : 2014 : REDLINE | Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) |
| ASTM D 1744 : 2013 | Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016) |
| EN 25164 : 1993 | MOTOR FUELS - DETERMINATION OF KNOCK CHARACTERISTICS - RESEARCH METHOD |
| ISO 3015:1992 | Petroleum products — Determination of cloud point |
| EN ISO 8754:2003 | Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
| ISO 6974:1984 | Natural gas — Determination of hydrogen, inert gases and hydrocarbons up to C8 — Gas chromatographic method |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.