CAN/CSA-Z15002:12 (R2017)
Current
The latest, up-to-date edition.
Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations)
Hardcopy , PDF
English, French
01-01-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Arrangement of flow-metering
systems and devices
5 General requirements
6 Test methods
7 Marking, colour coding and
packaging
8 Information to be supplied by
the manufacturer
Annex A (informative) - Rationale
Annex B (informative) - Arrangements of flow-metering
systems and devices
Annex C (informative) - Environmental aspects
Bibliography
This International Standard is applicable to: flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases flow-metering devices that are connected and disconnected by the operator at gas-specific connection points of devices such as pressure regulators
| DevelopmentNote |
Together with CSA Z10524, it supersedes CSA Z305.3. (06/2006) Together with CSA Z7396.2 & CSA Z10524, it supersedes CSA Z168.8. (02/2008)
|
| DocumentType |
Standard
|
| ISBN |
978-1-55491-901-7
|
| Pages |
0
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Current
|
| Supersedes |
Preface This is the second edition of CAN/CSA-Z15002, Flow-metering devices for connection to terminal units of medical gas pipeline systems, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 15002 (second edition, 2008-07-01). It supersedes the previous edition published in 2002 as CAN/CSA-Z15002 (adopted ISO 15002:2000). Scope 1.1 This International Standard is applicable to: flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases flow-metering devices that are connected and disconnected by the operator at gas-specific connection points of devices such as pressure regulators 1.2 This International Standard applies to: a) flow-metering devices intended to be used with the following medical gases: oxygen nitrous oxide medical air carbon dioxide oxygen/nitrous oxide mixture [50 %/50 % (by volume)] specified mixtures of the gases listed above b) flow-metering devices intended to be used with the following gases oxygen-enriched air helium xenon Note:Regional or national regulations might permit use of oxygen-specific connection points for oxygen-enriched air. 1.3 This International Standard does not apply to electrical or electronic flow-metering devices. 1.4 This International Standard does not apply to gases used for driving surgical tools.
| EN 13220 : 1998 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| ISO 19054:2005 | Rail systems for supporting medical equipment |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO/TR 15223:1998 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| CGA V 5 : 2008(R2013) | DIAMETER INDEX SAFETY SYSTEM (NON-INTERCHANGEABLE LOW PRESSURE CONNECTIONS FOR MEDICAL GAS APPLICATIONS) |
| CSA Z5359 : 2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.