• Shopping Cart
    There are no items in your cart

CLC/TS 50535:2010

Current

Current

The latest, up-to-date edition.

Railway applications - Onboard auxiliary power converter systems

Published date

30-04-2010

Sorry this product is not available in your region.

Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Onboard auxiliary power converter systems
5 General requirements
6 Electrical Interfaces
7 Control interface of the onboard auxiliary power converter
  system (APCS)
8 Tests
Annex A (normative) - Single pole power voltages (RIC train
        line)
Annex B (informative) - Train configurations
Annex C (informative) - Type code
Annex D (informative) - Example of the APCS communication
        interface
Bibliography

This Technical Specification defines the classification of the electric onboard auxiliary power converter system and defines its basic characteristics and interfaces. The onboard auxiliary power converter system consists of the auxiliary converter and the battery charger function. This Technical Specification applies to locomotive hauled passenger trains and electric multiple units with distributed power as well as trains with concentrated power heads. Relevant train configuration and concerned energy supply subsystems are defined in CLC/TS 50534. This Technical Specification provides a technical base for implementation of onboard auxiliary power systems on different trains. The objective of this specification is to define the required interfaces and characteristics of the onboard auxiliary power converter system in order to enable further standardisation: •interface between onboard auxiliary power converter system and onboard traction power system; •interface of the onboard auxiliary power supply system to the low voltage grid and to a shore supply (stationary workshop supply or external supply); •interfaces of the auxiliary converter and the battery charger; •characteristics of the onboard auxiliary power converter system. The electrical operational behaviour is defined by requirements. Requirements for the type tests as well as the routine test are referred.

Committee
CLC/TC 9X
DocumentType
Technical Specification
PublisherName
European Committee for Standards - Electrical
Status
Current

Standards Relationship
CEI CLC/TS 50535 : 2011 Identical
DD CLC/TS 50535:2010 Identical
NEN NPR CLC/TS 50535 : 2010 Identical
S.R. CLC/TS 50535:2010 Identical

DD CLC/TS 50537-2:2010 Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors
PREN 50547 : DRAFT 2011 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
BS EN 50533 : 2011 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
BS EN 61287-1:2014 Railway applications. Power converters installed on board rolling stock Characteristics and test methods
UNE-EN 50547:2013 Railway applications - Batteries for auxiliary power supply systems
CEI CLC/TS 50537-2 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
S.R. CLC/TS 50537-2:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
UNE-EN 61287-1:2015 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
DD CLC/TS 50537-3:2010 Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters
CLC/TS 50537-2:2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors
PREN 50388-1 : DRAFT 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN TRACTION POWER SUPPLY AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY - PART 1: GENERAL
CLC/TS 50537-3:2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters
CEI CLC/TS 50537-3 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
11/30235301 DC : 0 BS EN 50547 - RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
DD CLC/TS 50537-1:2010 Railway applications. Mounted parts of the traction transformer and cooling system HV bushing for traction transformers
CEI CLC/TS 50537-4 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES
I.S. EN 50533:2011 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
CEI CLC/TS 50537-1 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS
IEC 62973-1:2018 Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 1: General requirements
CLC/TS 50537-4:2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles
CLC/TS 50537-1:2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers
CEI CLC/TS 50534 : 2011 RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS
DD CLC/TS 50537-4:2010 Railway applications. Mounted parts of the traction transformer and cooling system Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles
17/30356581 DC : 0 BS EN 50388-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN TRACTION POWER SUPPLY AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY - PART 1: GENERAL
BS EN 50547:2013 Railway applications. Batteries for auxiliary power supply systems
CEI EN 50547 : 2014 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
S.R. CLC/TS 50537-1:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS
CEI EN 50533 : 2012 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
UNE-EN 50533:2012 Railway applications - Three-phase train line voltage characteristics.
S.R. CLC/TS 50537-4:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 4: GAS AND LIQUID ACTUATED (BUCHHOLZ) RELAY FOR LIQUID IMMERSED TRANSFORMERS AND REACTORS WITH CONSERVATOR FOR RAIL VEHICLES
I.S. EN 61287-1:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS
I.S. EN 50547:2013 RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS
S.R. CLC/TS 50537-3:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
EN 50547:2013 Railway applications - Batteries for auxiliary power supply systems
EN 50533 : 2011 AMD 1 2016 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
CEI EN 50388-1:2023 Railway Applications Fixed installations and rolling stock - Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability Part 1: General

PREN 50533 : DRAFT 2009 RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
IEC 60038:2009 IEC standard voltages
EN 50124-2:2017 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
CLC/TS 50534:2010 Railway applications - Generic system architectures for onboard electric auxiliary power systems
IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
EN 50121-3-2:2016 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
EN 50547:2013 Railway applications - Batteries for auxiliary power supply systems
EN 60721-3-5:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations
EN 61375-1:2012 Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture
IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
EN 50238 : 2003 COR 2014 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS
IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
EN 50125-1:2014 Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
IEC 60077-2:2017 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
IEC 61375-1:2012 Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 50272-2:2001 Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
EN 50163 : 2004 COR 2013 RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
EN 50388 : 2012 COR 2013 RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
EN 12663 : 2000 RAILWAY APPLICATIONS - STRUCTURAL REQUIREMENTS OF RAILWAY VEHICLE BODIES
96/48/EC : 1996 COUNCIL DIRECTIVE 96/48/EC OF 23 JULY 1996 ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED RAIL SYSTEM
IEC 60310:2016 Railway applications - Traction transformers and inductors on board rolling stock

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.