• CSA C22.2 No. 272 : 2014

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    WIND TURBINE ELECTRICAL SYSTEMS

    Available format(s):  Hardcopy, PDF

    Superseded date:  16-11-2019

    Language(s):  English, French

    Published date:  01-01-2014

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Preface
    1 Scope
    2 Reference publications
    3 Definitions
    4 General requirements
    5 Grid or external supply disconnection devices and conductor
       terminations
    6 Protection against electric shock
    7 Protection of equipment
    8 Grounding and bonding
    9 Operator interface
    10 Conductors and cables
    11 Wiring methods
    12 Working spaces
    13 Accessories
    14 Markings, warning signs, and equipment identification
    15 Technical documentation

    Abstract - (Show below) - (Hide below)

    Pertains to complete wind turbine electrical systems and associated electrical equipment intended for connection at not more than 46 kV and intended for use in accordance with the Canadian Electrical Code, Part I.

    General Product Information - (Show below) - (Hide below)

    Development Note French Edition issued on 01-05-2015. (06/2015)
    Document Type Standard
    Publisher Canadian Standards Association
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
    C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
    C22.2 NO. 96.2-18 Flexible power cables for wind turbine applications rated up to 35 kV
    C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations

    Standards Referencing This Book - (Show below) - (Hide below)

    CSA C22.2 No. 38 : 2014 THERMOSET-INSULATED WIRES AND CABLES
    CSA C22 NO. 4 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
    C22.2 NO. 232-17 Optical fiber cables
    C88-16 Power transformers and reactors
    CSA C22.2 No. 5 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES
    CSA C22.2 No. 29 : 2015 PANELBOARDS AND ENCLOSED PANELBOARDS
    CSA C22.2 No. 273 : 2014(R2019) CABLEBUS
    CSA C61400-1 : 2014 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
    C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
    CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
    CSA C22.2 No. 0.4 : 2004(R2013) BONDING OF ELECTRICAL EQUIPMENT
    ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
    CSA C22.2 No. 123 : 2016 METAL SHEATHED CABLES
    IEC 61082-4:1996 Preparation of documents used in electrotechnology - Part 4: Location and installation documents
    CSA Z462 : 2015 WORKPLACE ELECTRICAL SAFETY
    IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
    CSA C22.2 No. 124 : 2016 MINERAL-INSULATED CABLE
    CSA C22.2 No. 31 : 2014 SWITCHGEAR ASSEMBLIES
    CSA C68.10 : 2014 SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV
    ISO 12100:2010 Safety of machinery General principles for design Risk assessment and risk reduction
    CSA C22.2 No. 250.13 : 2017 LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS
    CSA C22.2 No. 107.3 : 2014 UNINTERRUPTIBLE POWER SYSTEMS
    IEC 61082-3:1993 Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
    C22.2 NO. 214-17 Communications cables (Bi-national standard, with UL 444)
    CSA C22.2 No. 208 : 2014 FIRE ALARM AND SIGNAL CABLE
    IEEE 835 : 1994 POWER CABLE AMPACITY TABLES
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    CSA C22.2 No. 190 : 2014 CAPACITORS FOR POWER FACTOR CORRECTION
    CSA Z460 : 2013 CONTROL OF HAZARDOUS ENERGY - LOCKOUT AND OTHER METHODS
    CSA C22.2 No. 65 : 2013 WIRE CONNECTORS
    CSA C22.2 No. 60529 : 2016 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
    CAN/CSA-C22.2 NO. 60947-1-13 (R2018) Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE)
    CSA C22.2 No. 239 : 2017 CONTROL AND INSTRUMENTATION CABLES
    CSA C22.2 No. 0.15 : 2015 ADHESIVE LABELS
    CSA C22.2 No. 210 : 2015 APPLIANCE WIRING MATERIAL PRODUCTS
    CSA C68.3 : 1997
    CSA C22.2 No. 130 : 2016 REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS
    C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
    CSA C22.2 No. 100 : 2014 MOTORS AND GENERATORS
    IEEE 404-2012 EXTRUDED AND LAMINATED DIELECTRIC SHIELDED CABLE JOINTS RATED 2.5 KV TO 500 KV
    CSA C22.2 No. 2556 : 2015 WIRE AND CABLE TEST METHODS
    C22.2 NO. 236-15 Heating and cooling equipment (Bi-national standard with UL 1995)
    CSA C22.2 No. 107.1 : 2016 POWER CONVERSION EQUIPMENT
    IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
    CSA C22.2 No. 14 : 2013 INDUSTRIAL CONTROL EQUIPMENT
    CSA C22.2 No. 47 : 2013 AIR-COOLED TRANSFORMERS (DRY TYPE)
    ULC S527 : 2011 AMD 1 2014 CONTROL UNITS FOR FIRE ALARM SYSTEMS
    CSA C22.2 NO No. 51:14 (R2018) ARMOURED CABLES
    C22.2 NO. 126.1-17 Metal cable tray systems (Binational standard with NEMA VE 1-2017)
    ISO 13849-1:2015 Safety of machinery Safety-related parts of control systems Part 1: General principles for design
    CSA C22.2 NO. 60947-4-1:14 (R2019) Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1)
    CSA C22.2 No. 46 : 2013 ELECTRIC AIR HEATERS
    CSA C22.2 No. 94.2 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS
    CSA C22.2 No. 113 : 2015 FANS AND VENTILATORS
    IEC 61082-2:1993 Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective