• Shopping Cart
    There are no items in your cart

DEFSTAN 22-94/1(2007) : 2007

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

SPECIFICATION FOR THE MANUFACTURE OF REPLENISHMENT AT SEA HOSES AND HOSE ASSEMBLIES

Available format(s)

Hardcopy , PDF

Superseded date

12-09-2008

Language(s)

English

Published date

01-01-2007

€17.53
Excluding VAT

Foreword
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 Performance Specification
  5.1 Manufacturers' Type Tests
6 Military Standards/Requirements
  6.1 Manufacture
       6.1.1 Quality
       6.1.2 Method
       6.1.3 Construction
              6.1.3.1 General
              6.1.3.2 Type 7 Hose
       6.1.4 Hose Markings
       6.1.5 Dimensions and Tolerances
              6.1.5.1 Length of Hose and Hose Assembly
              6.1.5.2 Bore
              6.1.5.3 Outside Diameter
              6.1.5.4 Concentricity
              6.1.5.5 Weight
  6.2 Identification and Packing
  6.3 Oils and Greases
7 Design Requirements/Guidance
  7.1 Materials
       7.1.1 Lining
       7.1.2 Reinforcement
       7.1.3 Cover and Sleeve
       7.1.4 Couplings and Associated Fittings
       7.1.5 Binding Wire
  7.2 Production Test and Inspection
       7.2.1 Visual Inspection
       7.2.2 Batch Test
       7.2.3 Acceptance Standard
8 Corporate Experience & Knowledge
Annex A Normative References
Annex B Abbreviations
Annex C Testing and Test Report Requirements for Type 1
        Hose - 64 mm Bore for Abeam RAS for use with
        Portable Water
  C.1 Manufacturer's Testing
  C.2 Rubber Properties Material Tests
  C.3 Adhesion Test
  C.4 Crush Test
  C.5 Bend Radius
  C.6 Bend Test
  C.7 Low Temperature Flexibility Test
  C.8 Hydrostatic Tests
  C.9 Proof Pressure and Axial Rotation Test
  C.10 Burst Test
  C.11 Tensile and Elongation Tests
  C.12 Manufacturer's Test Report Requirements
Annex D Tensile and Elongation Test Equipment and Preparation
        for Type 1 Hose - 64 mm Bore Assembly for Abeam RAS
        for use with Portable Water
  D.1 Test Equipment
  D.2 Preparation of Test Equipment
  D.3 Tensile and Elongation Tests
Annex E Testing and Test Report Requirements for Type 2
        Hose - 64 mm Bore for Abeam RAS for use with
        Lubricating Oils, Dieso Fuel and Avcat
  E.1 Manufacturer's Testing
  E.2 Rubber Properties Material Tests
  E.3 Adhesion Test
  E.4 Crush Test
  E.5 Bend Radius
  E.6 Bend Test
  E.7 Low Temperature Flexibility Test
  E.8 Hydrostatic Tests
  E.9 Proof Pressure and Axial Rotation Test
  E.10 Burst Test
  E.11 Tensile and Elongation Tests
  E.12 Manufacturer's Test Report Requirements
Annex F Tensile and Elongation Test Equipment and
        Preparation for Type 2 Hose - 64 mm Bore for RAS
        for use with Lubricating Oils, Dieso Fuel and Avcat
  F.1 Test Equipment
  F.2 Preparation of Test Equipment
  F.3 Tensile and Elongation Test
Annex G Testing and Test Report Requirements for Type 3
        Hose - 153 mm Bore for Abeam RAS for use with
        Dieso Fuel and Avcat
  G.1 Manufacturer's Testing
  G.2 Rubber Properties Materials Tests
  G.3 Adhesion Test
  G.4 Crush Test
  G.5 Bend Radius Test
  G.6 Bend Test
  G.7 Low Temperature Flexibility Test
  G.8 Hydrostatic Tests
  G.9 Proof Pressure and Axial Rotation Test
  G.10 Burst Test
  G.11 Coupling Inspection
  G.12 Tensile and Elongation Tests
  G.13 Manufacturer's Test Report Requirements
Annex H Tensile and Elongation Test, Equipment and
        Preparation for Type 3 Hose - 153 mm Bore for
        Abeam RAS for use with Dieso Fuel and Avcat
  H.1 Test Equipment
  H.2 Preparation of Test Equipment
  H.3 Tensile and Elongation Tests
Annex I Testing and Test Report Requirements for Type 4
        Hose - 153 mm Bore for Astern RAS for use with
        Dieso Fuel (Lay on Deck)
  I.1 Manufacturer's Testing
  I.2 Rubber Properties Material Tests
  I.3 Adhesion Test
  I.4 Crush Test
  I.5 Bend Radius Test
  I.6 Bend Test
  I.7 Low Temperature Flexibility Test
  I.8 Hydrostatic Tests
  I.9 Proof Pressure and Axial Rotation Test
  I.10 Burst Test
  I.11 Coupling Inspection
  I.12 Tensile and Elongation Tests
  I.13 Manufacturer's Test Report Requirements
Annex J Tensile and Elongation Test, Equipment and Preparation
        for Type 4 Hose - 153 mm Bore for Astern RAS for use
        with Dieso Fuel (Lay on Deck)
  J.1 Test Equipment
  J.2 Preparation of Test Equipment
  J.3 Tensile and Elongation Tests
Annex K Testing and Test Report Requirements for Type 5
        Hose - 153 mm Bore Wire Reinforced Hardwall for use
        on the Probe Received and the Outboard Hose in the
        Abeam Rig in RAS for Dieso Fuel and Avcat
  K.1 Manufacturer's Testing
  K.2 Rubber Properties Material Tests
  K.3 Adhesion Test
  K.4 Crush Test
  K.5 Bend Radius Test
  K.6 Bend Test
  K.7 Low Temperature Flexibility Test
  K.8 Hydrostatic Tests
  K.9 Proof Pressure and Axial Rotation Test
  K.10 Burst Test
  K.11 Tensile and Elongation Tests
  K.12 Manufacturer's Test Report Requirements
Annex L Tensile and Elongation Test, Equipment and Preparation
        for Type 5 Hose - 153 mm Bore Wire Reinforced Hardwall
        for use on the Probe Received and the Outboard Hose in
        the Abeam Rig in RAS for Dieso Fuel and Avcat
  L.1 Test Equipment
  L.2 Preparation of Test Equipment
  L.3 Tensile and Elongation Tests
Annex M Testing and Test Report Requirements for Type 6
        Hose - 153 mm Bore Softwall for use on the Probe
        Receiver in RAS for Dieso Fuel and Avcat
  M.1 Manufacturer's Testing
  M.2 Rubber Properties Material Tests
  M.3 Adhesion Test
  M.4 Crush Test
  M.5 Bend Radius Test
  M.6 Bend Test
  M.7 Low Temperature Flexibility Test
  M.8 Hydrostatic Tests
  M.9 Proof Pressure and Axial Rotation Test
  M.10 Burst Test
  M.11 Tensile and Elongation Tests
  M.12 Manufacturer's Test Report Requirements
Annex N Tensile and Elongation Test, Equipment and Preparation
        for Type 6 Hose - 153 mm Bore Softwall for use in the
        Probe Receiver in RAS for Dieso Fuel and Avcat
  N.1 Test Equipment
  N.2 Preparation of Test Equipment
  N.3 Tensile and Elongation Tests
Annex O Testing and Test Report Requirements for Type 7
        Hose - 153 mm Bore Reelable Astern for RAS for
        use with Dieso Fuel
  O.1 Manufacturer's Testing
  O.2 Rubber Properties Material Tests
  O.3 Adhesion Test
  O.4 Crush Test
  O.5 Bend Radius Test
  O.6 Bend Test
  O.7 Low-Temperature Flexibility Test
  O.8 Hydrostatic Tests
  O.9 Proof Pressure and Axial Rotation Test
  O.10 Burst Test
  O.11 Elongation and Neckdown Tests
  O.12 Tensile Pull
  O.13 Test on the Hose Inclusive of the Area of a Splice
  O.14 Coupling Tests
       O.14.1 Tensile Pull
       O.14.2 High Pressure Hold Test
       O.14.3 Proof Test
       O.14.4 Coupling to Coupling Test for Split Clamp
              Assemblies
  O.15 Manufacturer's Test Report Requirements
Annex P Visible Defects in RAS Hoses
  P.1 Introduction
Annex Q Hose Identification Panel
Annex R Bend Test
  R.1 Sample
  R.2 Method
  R.3 Requirement
Annex S Low Temperature Flexibility Test
  S.1 Method
Annex T Method of Measuring the Free Length of a Hose

Specifies the details for the materials, manufacture, testing and packing of 64 mm bore and 153 mm bore reinforced synthetic rubber hoses and hose assemblies.

DevelopmentNote
Supersedes DEFSTAN 22-15/1(2006), DEFSTAN 22-16/2(2006), DEFSTAN 22-17/1(2000), DEFSTAN 22-18/1(2000), DEFSTAN 22-19/1(2000), DEFSTAN 22-71/1(2000), DEFSTAN 22-90/1(2000) and DEFSTAN 22-92/1(2006). (05/2007)
DocumentType
Standard
Pages
100
PublisherName
UK Ministry of Defence Standards
Status
Superseded
SupersededBy
Supersedes

BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
DEFSTAN 07-279/3(2006) : 2006 AMD 1 2007 REQUIREMENTS FOR REPLENISHMENT AT SEA HM SURFACE SHIPS
BS ISO 1817:2015 Rubber, vulcanized or thermoplastic. Determination of the effect of liquids
DEFSTAN 91-86/5(2005) : 2005 TURBINE FUEL, AVIATION KEROSINE TYPE: HIGH FLASH TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-44 JOINT SERVICE DESIGNATION: AVCAT/FSII
BS EN 1676:2010 Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS EN ISO 9001:2015 Quality management systems. Requirements
BS EN 10324:2004 Steel wire and wire products. Hose reinforcement wire
DEFSTAN 01-5/15(2007) : 2007 FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
BS ISO 37:2011 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
DEFSTAN 91-74/2(2000) : 2000 LUBRICATING OIL, STEAM TURBINE AND GEAR, EXTREME PRESSURE JOINT SERVICE DESIGNATION: OEP-80
BS EN 10244-2:2009 Steel wire and wire products. Non-ferrous metallic coatings on steel wire Zinc or zinc alloy coatings
DEFSTAN 91-25/4(2002) : 2002 LUBRICATING OIL, GEAR, NAVAL: LIGHT SERVICE NATO CODE: O-240 JOINT SERVICE DESIGNATION: OM-100
BS EN 27326:1993 Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS EN 1559-4:2015 Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings
BS EN 1982:2017 Copper and copper alloys. Ingots and castings
BS EN 1706:2010 Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
DEFSTAN 91-4/7(2004) : 2004 FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION: DIESO F76
BS EN ISO 4671 : 2007 RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - METHODS OF MEASUREMENT OF THE DIMENSIONS OF HOSES AND THE LENGTHS OF HOSE ASSEMBLIES
BS EN ISO 8033:2017 Rubber and plastics hoses. Determination of adhesion between components
DEFSTAN 91-22/5(2006) : 2006 LUBRICATING OIL, DIESEL ENGINES: SEVERE SERVICE, GRADE 40 NATO CODE: O-278 JOINT SERVICE DESIGNATION: OMD-113
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
BS 5173-103.2:1990 Methods of test for rubber and plastics hoses and hose assemblies. Physical tests Determination of crush resistance of hoses

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.