DEFSTAN 23-6/4(2005) : 2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
TECHNOLOGY GUIDANCE FOR MILITARY LOGISTICS VEHICLES
Available format(s)
Hardcopy , PDF
Withdrawn date
22-05-2016
Language(s)
English
Published date
01-01-2005
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 General
6 Legislation (Road Use), Safety & Dangerous Goods
7 Working Fluids (Fuel, Lubricant, Hydraulic)
8 Lubricating Systems
9 Hydraulic Services Excluding Brakes
10 Braking Systems and Interfaces
11 Electrical Systems
12 Cabs and Bodies
13 Human Factors
14 Survivability
15 Instruments
16 Chassis Frame and Fittings
17 Towed Equipment, Recovery and Tie Down Requirements
18 Tyres, Wheels and Traction Devices
19 Markings
20 Mobility Requirements
21 Availability, Reliability and Maintainability
22 Environmental Characteristics
Annex A - Human Factors Considerations
A.1 Introduction
A.2 Cab design and driving function
A.3 Communications
A.4 Information systems
A.5 Driving aid technologies
A.6 Controls and displays
A.7 Reversionary modes
A.8 Operational conditions
A.9 Habitability
A.10 Design for maintenance
A.11 Compliance with legislation
A.12 General design guidance for health and safety
Annex B - Grading of Mobility Classes
Annex C - Normative documents
Annex D - Definitions and Abbreviations
D.1 Definitions
D.2 Abbreviations
Describes the technical requirements for military logistic vehicles and towed equipment; it is complementary to the military logistic vehicle procurement requirement, User Requirement Document (URD) and System Requirement Document (SRD). It lists National and International Standards, Specifications, Agreements and Directives related to vehicle engineering and human factors.
| DevelopmentNote |
Supersedes DEFSTAN 23-6/3(2000) (10/2005) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2016)
|
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Withdrawn
|
| Supersedes |
| DEFSTAN 00-6/6(2011) : 2011 | FORDING AND FLOTATION REQUIREMENTS FOR COMBAT AND SUPPORT GROUND VEHICLES |
| DEFSTAN 00-6/7(2011) : 2011 | FORDING AND FLOTATION REQUIREMENTS FOR COMBAT AND SUPPORT GROUND VEHICLES |
| DEFSTAN 25-9/2(2011) : 2011 | DESIGN GUIDELINES FOR A COMMON RESTRAINT SYSTEM - LAND EQUIPMENT |
| DEFSTAN 00-6/5(2006) : 2006 | |
| DEFSTAN 00-006/8(2017) : 2017 | FORDING AND FLOTATION REQUIREMENTS FOR COMBAT AND SUPPORT GROUND VEHICLES |
| DEFSTAN 61-5(PT6)/6(2009) : 2009 | NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS |
| DEFSTAN 23-7/2(2011) : 2011 | DESIGN GUIDELINES FOR ARMOURED FIGHTING VEHICLES |
| DEFSTAN 23-10/1(2011) : 2011 | DESIGN GUIDELINES FOR MINISTRY OF DEFENCE SPECIALIST VEHICLES AND PLANT EQUIPMENT |
| ISO 2631:1978 | Guide for the evaluation of human exposure to whole-body vibration |
| SAE J2576_200204 | Blade Fuses - 42 V System |
| PD 6504:1983 | Medical information on human reaction to skin contact with hot surfaces |
| DEFSTAN 00-42(PT3)/2(2003) : 2003 | RELIABILITY AND MAINTAINABILITY (R&M) ASSURANCE GUIDANCE - PART 3: R&M CASE |
| ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| BS 4778-1:1987 | Quality vocabulary International terms |
| DEFSTAN 00-40(PT1)/5(2003) : 2003 | RELIABILITY AND MAINTAINABILITY (R&M) - PART 1: MANAGEMENT RESPONSIBILITIES AND REQUIREMENTS FOR PROGRAMMES AND PLANS |
| ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
| STANAG 4007 : 0 | ELECTRICAL CONNECTORS BETWEEN PRIME MOVERS, TRAILERS AND TOWED ARTILLERY |
| ISO 16750-5:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
| BS 4086:1966 | Recommendations for maximum surface temperatures of heated domestic equipment |
| ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
| BS 6841:1987 | Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock |
| STANAG 4062 : 2016 | SLINGING AND TIE-DOWN FACILITIES FOR LIFTING AND TYING DOWN MILITARY EQUIPMENT FOR MOVEMENT BY LAND AND SEA |
| STANAG 2601 : 2017 | STANDARDIZATION OF ELECTRICAL SYSTEMS IN TACTICAL LAND VEHICLES |
| DEFSTAN 00-49/1(1996) : 1996 | RELIABILITY AND MAINTAINABILITY MOD GUIDE TO TERMINOLOGY DEFINITIONS |
| DEFSTAN 59-41(PT3)/5(1995) : 1995 | ELECTROMAGNETIC COMPATIBILITY - PART 3: TECHNICAL REQUIREMENTS TEST METHODS AND LIMITS |
| DEFSTAN 59-41(PT1)/7(2002) : 2002 | ELECTROMAGNETIC COMPATIBILITY - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF EMC REQUIREMENTS |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| DEFSTAN 59-41(PT6)/1(1994) : 1994 | ELECTROMAGNETIC COMPATIBILITY - PART 6: CODE OF PRACTICE FOR MILITARY VEHICLES INSTALLATION GUIDELINES |
| STANAG 4360 : 2012 | SPECIFICATION FOR PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| BS AU 152:1970 | Specification for rear marking plates for vehicles |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| STANAG 2021 : 2017 | MILITARY LOAD CLASSIFICATION OF BRIDGES, FERRIES, RAFTS AND VEHICLES |
| STANAG 2604 : 0 | BRAKING SYSTEMS BETWEEN TRACTORS, DRAW BAR TRAILER AND SEMI-TRAILER EQUIPMENT COMBINATIONS FOR MILITARY USE |
| BS ISO 12214:2010 | Road vehicles. Direction-of-motion stereotypes for automotive hand controls |
| STANAG 4019 : 0 | EMERGENCY TOWING FACILITIES |
| STANAG 3548 : 2010 | TIE-DOWN FITTINGS ON AIR TRANSPORTED AND AIR-DROPPED EQUIPMENT AND CARGO CARRIED INTERNALLY BY FIXED WING AIRCRAFT |
| ISO 11406:2001 | Commercial road vehicles Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers Interchangeability |
| BS EN 352-1:2002 | Hearing protectors. Safety requirements and testing Ear-muffs |
| DEFSTAN 00-25(PT14)/1(2000) : 2000 | HUMAN FACTORS FOR DESIGNERS OF EQUIPMENT - PART 14: MILITARY LAND VEHICLE DESIGN |
| DEFSTAN 00-25(PT19)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 19: HUMAN ENGINEERING DOMAIN |
| BS EN ISO 5165:1998 | Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method |
| DEFSTAN 00-41/3(1993) : 1993 | RELIABILITY AND MAINTAINABILITY MOD GUIDE TO PRACTICES AND PROCEDURES |
| BS EN 3-7 : 2004 | PORTABLE FIRE EXTINGUISHERS - PART 7: CHARACTERISTICS, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DEFSTAN 00-25(PT20)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 20: HEALTH HAZARD ASSESSMENT DOMAIN |
| BS DD235(1996) : 1996 | GUIDE TO IN-VEHICLE INFORMATION SYSTEMS |
| ISO 16750-3:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
| BS EN 13202:2000 | Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in product standards with the aid of EN 563 |
| STANAG 1414 : 2009 | GUIDELINES TO ENSURE THAT CONTRACTORS DESIGN AND SUPPLY NEW EQUIPMENT CAPABLE OF USING STANDARDIZED FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| BS EN 352-2:2002 | Hearing protectors. Safety requirements and testing Ear-plugs |
| STANAG 4145 : 1991 | NUCLEAR SURVIVABILITY CRITERIA FOR ARMED FORCES MATERIEL AND INSTALLATIONS - AEP-4 |
| MIL-STD-3009 Base Document:2001 | LIGHTING, AIRCRAFT, NIGHT VISION IMAGING SYSTEM (NVIS) COMPATIBLE |
| SAE J2622_201102 | Battery Connections for 42 Volt Electrical Systems Tests and General Performance Requirements |
| STANAG 4569 : 2012 | PROTECTION LEVELS FOR OCCUPANTS OF ARMOURED VEHICLES |
| ISO 21848:2005 | Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads |
| STANAG 4362 : 2012 | FUELS FOR FUTURE GROUND EQUIPMENT USING COMPRESSION IGNITION OR TURBINE ENGINES |
| STANAG 4478 : 2004 | EMERGENCY TOWING AND RECOVERY FACILITIES FOR TACTICAL LAND VEHICLES |
| BS AU 145d:1998 | Specification for retroreflecting number plates |
| BS ISO 9921-1:1996 | Ergonomic assessment of speech communication Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method) |
| DEFSTAN 00-25(PT17)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 17: PERSONNEL DOMAIN |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| DEFSTAN 00-35(PT2)/1(1987) : INTERIM | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIAL - PART 2: SPECIFICATION OF SERVICE ENVIRONMENTS |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| DEFSTAN 25-24/1(2004) : 2004 | HEALTH AND USAGE MONITORING CAPABILITY FOR LAND PLATFORMS (HUMS) |
| ISO 1724:2003 | Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
| STANAG 4101 : 0 | TOWING ATTACHMENTS |
| DEFSTAN 00-56/1(1991) : 1991 | HAZARD ANALYSIS AND SAFETY CLASSIFICATION OF THE COMPUTER AND PROGRAMMABLE ELECTRONIC SYSTEM ELEMENTS OF DEFENCE EQUIPMENT |
| DEFSTAN 91-87/5(2005) : 2005 | TURBINE FUEL, AVIATION KEROSINE TYPE: CONTAINING FUEL SYSTEM ICING INHIBITOR NATO CODE: F-34 JOINT SERVICE DESIGNATION: AVTUR/FSII |
| DEFSTAN 08-46/2(2002) : 2002 AMD 2 2004 | THE ELECTRIC, MAGNETIC AND ELECTROMAGNETIC ENVIRONMENT |
| DEFSTAN 01-5/14(2005) : 2005 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| BS AU 149a:1980 | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal) |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| BS EN 352-3:2002 | Hearing protectors. Safety requirements and testing Ear-muffs attached to an industrial safety helmet |
| AMOVP-1 : A | ROAD MOVEMENTS AND MOVEMENT CONTROL |
| DEFSTAN 00-25(PT16)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 16: INTRODUCTION AND MANPOWER DOMAIN |
| DEFSTAN 99-4/1(1973) : 1973 | PLATES, IDENTIFICATION FOR VEHICLES, TRAILERS AND TRANSPORTABLE CONTAINERS |
| ISO 1185:2003 | Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
| DEFSTAN 08-41(PT1)/1(1997) : 1997 | CHEMICAL AND BIOLOGICAL HARDENING OF MILITARY EQUIPMENT - PART 1: GENERAL REQUIREMENTS ASSESSMENT AND TESTING |
| STANAG 1135 : 2017 | INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
| DEFSTAN 58-6/1(1991) : 1991 | |
| STANAG 4477 : 0 | SPECIFICATION FOR PAINTS AND PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF AEROSPACE MILITARY EQUIPMENT |
| DEFSTAN 00-72/2(2005) : 2005 | CHEMICAL AGENT RESISTANCE REQUIREMENTS FOR COATINGS APPLIED TO MILITARY EQUIPMENT |
| SAE J2651_201102 | Jump Start Connections for 42 Volt Electrical Systems |
| BS AU 183:1983 | Specification for passive seat belt systems |
| DEFSTAN 59-41(PT2)/5(2002) : 2002 | ELECTROMAGNETIC COMPATIBILITY - PART 2: MANAGEMENT AND PLANNING PROCEDURES |
| DEFSTAN 00-52/3(1991) : 1991 | THE GENERAL REQUIREMENTS FOR PRODUCT ACCEPTANCE AND MAINTENANCE TEST SPECIFICATIONS AND TEST SCHEDULES |
| BS 2869:1998 | Specification for fuel oils for agricultural, domestic and industrial engines and boilers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.