DIN 1988-7:2004-12
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE
Available format(s)
Hardcopy , PDF
Superseded date
01-05-2012
Superseded by
Language(s)
English
Published date
01-01-2004
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe, Symbole und Kurzzeichen
4 Anlagenplanung und -ausführung zur Vermeidung
von Schäden durch Innenkorrosion
4.1 Allgemeines
4.2 Werkstoffwahl
4.3 Trinkwasserbeschaffenheit
4.4 Betriebsbedingungen
4.5 Korrosionsschutzgerechte Installationsausführung
4.6 Behandlung von Trinkwasser zur Vermeidung von
Korrosionsschäden
4.7 Kathodischer Korrosionsschutz
4.8 Korrosionsschutzgerechter Abschluss der
Installationsarbeiten
5 Betrieb einer Anlage
5.1 Einhaltung der Betriebsbedingungen
5.2 Behandlung von Trinkwasser
6 Vermeidung/Verminderung der Steinbildung
6.1 Allgemeines
6.2 Behandlung von Trinkwasser zur Vermeidung/Verminderung
der Steinbildung
6.3 Einsatzhinweise
7 Vermeidung von Schäden durch Aussenkorrosion
7.1 Allgemeines
7.2 Erdverlegte Rohrleitungen
7.3 Freiverlegte Aussenleitungen
7.4 Rohrleitungen in Gebäuden
Literaturhinweise
This Standard is included in DIN Handbook 141.
| DevelopmentNote |
Supersedes DVGW W 379. (04/2002) Supersedes DIN 1988 (07/2002) Applies in conjunction with DIN 1988-1, DIN 1988-2, DIN 1988-3, DIN 1988-4, DIN 1988-5, DIN 1988-6, DIN 1988-8, DIN 50930-6, DIN EN 806-1, DIN EN 806-2 and DIN EN 1717. (12/2004)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN 4810:1991-09 | STEEL PRESSURE VESSELS FOR WATER SUPPLY SYSTEMS |
| DIN 6650-8:2009-12 | DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 8: REQUIREMENTS FOR POINT OF USE WATER COOLERS |
| DIN 50930-4:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS |
| DIN 50930-1:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; GENERALES |
| DIN 1988-3 Beiblatt 1:1988-12 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - EXAMPLES FOR CALCULATION - DVGW CODE OF PRACTICE |
| DIN 50930-3:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF HOT DIP IRON MATERIALS |
| DIN 3546-1:2011-01 | Stop valves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves of special design, gate valves and diaphragm valves, Technical rule of the DVGW |
| DIN HDBK 141 : 4ED 2002 | STEEL PIPELINES 2 - STANDARDS FOR USE IN THE DESIGN AND CONSTRUCTION OF PIPEWORK |
| DIN 1988-600:2010-12 | Codes of practice for drinking water installations - Part 600: Drinking water installations in connection with fire fighting and fire protection installations; DVGW code of practice |
| DIN 1988-6:2002-05 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 6: FIRE FIGHTING AND FIRE PROTECTION INSTALLATIONS - DVGW CODE OF PRACTICE |
| DIN 30660:1999-12 | Sealing materials for gas and water supply as well as water heating systems - Non-hardening jointing compounds and polytetrafluoroethylene (PTFE) tapes for metallic threaded joints in domestic installations |
| DIN 50929-1:2016-05 (Draft) | CORROSION OF METALS - CORROSION LIKELIHOOD OF CORROSION OF METALLIC MATERIALS WHEN SUBJECT TO CORROSION FROM THE OUTSIDE - PART 1: GENERAL |
| DIN 4046:1983-09 | WATER-SUPPLY - TERMS - DVGW CODE OF PRACTICE |
| DIN 18195-3:2011-12 | WATER-PROOFING OF BUILDINGS - PART 3: REQUIREMENTS OF THE GROUND AND WORKING PROPERTIES OF MATERIALS |
| DVGW W 404 : 1998 | WATER SERVICE PIPES |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| DIN EN 751-3:1997-08 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes (including Corrigendum AC:1997) |
| DIN 4753-3:2016-10 (Draft) | WATER HEATERS, WATER HEATING INSTALLATIONS AND STORAGE WATER HEATERS FOR DRINKING WATER - PART 3: CORROSION PROTECTION ON THE WATER SIDE BY ENAMELLING AND CATHODIC PROTECTION - REQUIREMENTS AND TESTING |
| DVGW W 553 : 1998 | DIMENSION OF CIRCULATION-SYSTEMS IN CENTRAL DRINKING WATER HEATING SYSTEMS |
| DIN 30674-3:2001-03 | SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING |
| DIN 30670:2012-04 | Polyethylene coatings on steel pipes and fittings - Requirements and testing |
| DIN 50930-6:2013-10 | Corrosion of metals - Corrosion of metallic materials under corrosion load by water inside of pipes, tanks and apparatus - Part 6: Evaluation process and requirements regarding the hygienic suitability in contact with drinking water |
| DIN 2000:2016-05 (Draft) | CENTRAL DRINKING WATER SUPPLY - GUIDELINES REGARDING REQUIREMENTS FOR DRINKING WATER, PLANNING, CONSTRUCTION, OPERATION AND MAINTENANCE OF SUPPLY PLANTS |
| DIN EN 13443-1:2007-12 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| DIN 50929-2:2016-05 (Draft) | CORROSION OF METALS - CORROSION LIKELIHOOD OF CORROSION OF METALLIC MATERIALS WHEN SUBJECT TO CORROSION FROM THE OUTSIDE - PART 2: SERVICE COMPONENTS INSIDE BUILDINGS |
| DIN 4753-7:2011-11 | WATER HEATERS, WATER HEATING INSTALLATIONS AND STORAGE WATER HEATERS FOR DRINKING WATER - PART 7: TANKS WITH A CAPACITY OF UP TO 1000 L, REQUIREMENTS RELATING TO MANUFACTURE, THERMAL INSULATION AND CORROSION PROTECTION |
| DIN 30675-1:1992-09 | EXTERNAL CORROSION PROTECTION OF BURIED PIPES - CORROSION PROTECTION SYSTEMS FOR STEEL PIPES |
| DIN 18195-10:2011-12 | WATER-PROOFING OF BUILDINGS - PART 10: PROTECTIVE LAYERS AND PROTECTIVE MEASURES |
| DIN 55928-9:1991-05 | PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - COATING MATERIALS - COMPOSITION OF BINDERS AND PIGMENTS |
| DIN EN ISO 12944-2:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS (ISO 12944-2:2017) |
| DIN 18195-9:2010-05 | WATER-PROOFING OF BUILDINGS - PART 9: PENETRATIONS, TRANSITIONS, CONNECTIONS AND ENDINGS |
| DIN 3389:1984-08 | Isolating joints ready for installation into service pipes in gas and water supply; built-in-isolating joints; requirements and tests |
| DIN 30674-5:1985-03 | EXTERNAL PROTECTION OF DUCTILE CAST IRON PIPES - POLYETHYLENE SLEEVING |
| DIN 1988-6:2002-05 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 6: FIRE FIGHTING AND FIRE PROTECTION INSTALLATIONS - DVGW CODE OF PRACTICE |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN 50930-5:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF COPPER AND COPPER ALLOYS |
| DIN 4753-2:1984-01 | WATER HEATING INSTALLATIONS FOR DRINKING WATER AND FOR WATER FOR INDUSTRIAL PURPOSES; PROCEDURE OF REGISTRATION OF WATER HEATERS OF WATER HEATING INSTALLATIONS |
| DIN 2999-1:1983-07 | PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS |
| DIN 18195-4:2011-12 | WATER-PROOFING OF BUILDINGS - PART 4: WATERPROOFING AGAINST GROUND MOISTURE (CAPILLARY WATER, RETAINED WATER) AND NON-ACCUMULATING SEEPAGE WATER UNDER FLOOR SLABS ON WALLS, DESIGN AND EXECUTION |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| DVGW W 534 : 2015 | ROHRVERBINDER UND ROHRVERBINDUNGEN IN DER TRINKWASSER-INSTALLATION |
| DIN EN ISO 12944-1:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
| DIN 18195-1:2011-12 | WATERPROOFING OF BUILDINGS - PART 1: PRINCIPLES, DEFINITIONS, ATTRIBUTION OF WATERPROOFING TYPES |
| DVGW W 291 : 2000 | DISINFECTION OF WATER SUPPLY SYSTEMS |
| DVGW W 510:2004-04 | Lime protection devices for use in drinking water installations - Requirements and tests |
| DIN EN ISO 8044:2015-12 | CORROSION OF METALS AND ALLOYS - BASIC TERMS AND DEFINITIONS (ISO 8044:2015) |
| DIN EN 14743:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - SOFTENERS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| DIN EN ISO 12944-8:2016-07 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017) |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
| DIN 18195-2:2009-04 | WATER-PROOFING OF BUILDINGS - PART 2: MATERIALS |
| DIN EN 806-1:2001-12 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL |
| DVGW W 541 : 1996 | STAINLESS STEEL AND TITANIUM PIPES FOR DRINKING WATER INSTALLATION; REQUIREMENTS AND TESTING |
| DIN 30674-1:1982-09 | COATING OF DUCTILE CAST IRON PIPES - POLYETHYLENE COATING |
| DIN 4753-10:1989-05 | WATER HEATING INSTALLATIONS FOR DRINKING WATER AND SERVICE WATER; CATHODIC CORROSION PROTECTION OF UNCOATED STEEL VESSELS; REQUIREMENTS AND TESTING |
| DIN 50930-4:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| DIN 30675-2:1993-04 | EXTERNAL CORROSION PROTECTION OF BURIED PIPES - CORROSION PROTECTION SYSTEMS FOR DUCTILE IRON PIPES |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| DIN 4753-4:2011-11 | WATER HEATERS, WATER HEATING INSTALLATIONS AND STORAGE WATER HEATERS FOR DRINKING WATER - PART 4: CORROSION PROTECTION ON THE WATER SIDE BY MEANS OF HOT-SETTING RESIN-BONDED TANK LININGS |
| DIN 30674-2:1992-10 | CEMENT MORTAR COATINGS FOR DUCTILE IRON PIPES - REQUIREMENTS AND TESTING |
| DVGW W 521 : 1995 | THREAD CUTTING AGENTS; SPECIFICATIONS AND TESTING |
| DIN EN ISO 12944-5:2016-06 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| DIN 4753-5:2011-11 | WATER HEATERS, WATER HEATING INSTALLATIONS AND STORAGE WATER HEATERS FOR DRINKING WATER - PART 5: CORROSION PROTECTION ON THE WATER SIDE BY MEANS OF NATURAL OR SYNTHETIC RUBBER TANK LININGS |
| DIN 18195-5:2011-12 | WATER-PROOFING OF BUILDINGS - PART 5: WATER-PROOFING AGAINST NON-PRESSING WATER ON FLOORS AND IN WET AREAS, DESIGN AND EXECUTION |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| DVGW GW 392 : 2009 | SEAMLESS COPPER PIPES FOR GAS AND WATER INSTALLATIONS; SPECIFICATIONS AND TESTING REQUIREMENTS |
| DVGW W 216 : 2004 | SUPPLY OF VARIOUS WATERS |
| DIN 50930-1:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; GENERALES |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| DVGW GW 2 : 2012 | ASSEMBLAGE DE TUBES CUIVRE POUR INSTALLATIONS DE GAZ ET D'EAU A L'INTERIEUR DE TERRAINS ET DE BATIMENTS |
| DIN EN 751-1:1997-05 | SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 1: ANAEROBIC JOINTING COMPOUNDS |
| DIN EN ISO 12944-7:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 7: EXECUTION AND SUPERVISION OF PAINT WORK (ISO 12944-7:2017) |
| DIN 4753-1:2011-11 | WATER HEATERS, WATER HEATING INSTALLATIONS AND STORAGE WATER HEATERS FOR DRINKING WATER - PART 1: TANKS WITH A CAPACITY OF OVER 1000 L |
| DIN 18195-6:2011-12 | WATER-PROOFING OF BUILDINGS - PART 6: WATER-PROOFING AGAINST OUTSIDE PRESSING WATER AND ACCUMULATING SEEPAGE WATER, DESIGN AND EXECUTION |
| DIN 50930-3:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF HOT DIP IRON MATERIALS |
| DIN EN ISO 12944-4:2016-07 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| DIN EN 751-2:1997-08 | SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 2: NON-HARDENING JOINTING COMPOUNDS |
| DIN 18195-8:2011-12 | WATER-PROOFING OF BUILDINGS - PART 8: WATER-PROOFING OVER JOINTS FOR MOVEMENTS |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| DIN EN 1717:2011-08 | Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow |
| DIN 4753-9:1990-09 | WATER HEATING INSTALLATIONS FOR DRINKABLE WATER AND WATER FOR INDUSTRIAL PURPOSES; PROTECTION AGAINST CORROSION ON THE WATER SIDE BY THERMOPLASTIC COATING MATERIALS; REQUIREMENTS AND TESTING |
| DIN EN ISO 12944-3:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017) |
| DIN 50929-3:2016-05 (Draft) | CORROSION OF METALS - CORROSION LIKELIHOOD OF METALLIC MATERIALS WHEN SUBJECT TO CORROSION FROM THE OUTSIDE - PART 3: BURIED AND UNDERWATER PIPELINES AND STRUCTURAL COMPONENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.