DIN 51848-1:1981-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TESTING OF MINERAL OILS; PRECISION OF TEST METHODS, GENERAL INTRODUCTION, DEFINITIONS AND THEIR APPLICATIONS TO MINERAL OIL STANDARDS WHICH CONTAIN REQUIREMENTS
01-04-1996
12-01-2013
1 Zweck und Anwendungsbereich
2 Allgemeines
3 Begriffe
3.1 Bestimmung
3.2 Ergebnis
3.3 Mittelwert
3.4 Wahrer Wert
3.5 Präzision
3.5.1 Wiederholbarkeit
3.5.2 Vergleichbarkeit
3.6 Vertrauensbereich des Mittelwertes
3.7 Lieferer
3.8 Abnehmer
3.9 Schiedsprobe
4 Bedeutung der Wiederholbarkeit und Vergleichbarkeit
4.1 Wiederholbarkeit r
4.1.1 Voraussetzungen für die Anerkennung von
Ergebnissen
4.1.2 Beurteilung von Ergebnissen -
Vertrauensbereich
4.2 Vergleichbarkeit R
4.2.1 Voraussetzungen für die Anerkennung von
Ergebnissen
4.2.2 Beurteilung von Ergebnissen -
Vertrauensbereich
5 Mineralölnormen,die Anforderungen enthalten
5.1 Zweck dieser Normen
5.2 Aufstellung von Mineralölnormen, die Anforderungen
enthalten (Stoffnormen)
6 Qualitätsprüfung auf Übereinstimmung mit Normen, die
Anforderungen enthalten
6.1 Prüfgrenzwerte beim Lieferer
6.2 Prüfgrenzwerte beim Abnehmer
6.3 Mehrere Ergebnisse
6.4 Zwischenhändler
7 Annahme oder Zurückweisung eines Erzeugnisses im
Streitfall
7.1 Kontrolluntersuchungen
7.2 Kontrolle des Prüfverfahrens und der Prüfgeräte
7.3 Einschalten eines neutralen Prüflaboratoriums
7.4 Vergleich der Ergebnisse mit der Anforderung
bei Verwendung von drei Mittelwerten
7.5 Vergleich der Ergebnisse mit der Anforderung
bei Verwendung von nur zwei Mittelwerten
Anhang A
A.1 Nomenklatur
Zitierte Normen
Weitere Normen
Frühere Ausgaben
Änderungen
Erläuterungen
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| ISO 4259:2006 | Similar to |
| DIN 51755-2:1978-09 | TESTING OF MINERAL OILS AND OTHER COMBUSTIBLE LIQUIDS - DETERMINATION OF FLASH POINT BY THE CLOSED TESTER ACCORDING TO ABEL-PENSKY, METHOD FOR DETERMINATION OF THE FLASH POINT BELOW +5 DEGREE C UP TO APPROXIMATELY -30 DEGREE C |
| DIN 51756-3:1987-07 | TESTING OF LIQUID AND GASEOUS FUELS; DETERMINATION OF KNOCKING CHARACTERISTICS (OCTANE NUMBER); DETERMINATION WITH THE BASF-MOTOR |
| BS ISO 5940-2:2007 | Carbonaceous materials used in the production of aluminium. Pitch for electrodes Determination of the softening point (Mettler softening point method) |
| DIN 51604-2:1984-03 | METHANOLIC FAM TESTING FLUID FOR POLYMER MATERIALS; COMPOSITION AND REQUIREMENTS |
| DIN 51604-3:1984-03 | METHANOLIC LOWER LAYER FAM TESTING FLUID FOR POLYMER MATERIALS; COMPOSITION AND REQUIREMENTS |
| DIN 51777-1:1983-03 | TESTING OF MINERAL OIL HYDROCARBONS AND SOLVENTS - DETERMINATION OF WATER CONTENT ACCORDING TO KARL FISCHER - DIRECT METHOD |
| DIN 51381:1988-12 | TESTING OF LUBRICATING OILS, GOVERNOR OILS & HYDRAULIC FLUIDS; DETERMINATION OF AIR RELEASE PROPERTIES |
| DIN 51554-3:1978-09 | TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C |
| ISO 5940-2:2007 | Carbonaceous materials used in the production of aluminium Pitch for electrodes Part 2: Determination of the softening point (Mettler softening point method) |
| DIN 51807-1:1979-04 | TESTING OF LUBRICANTS; TEST OF THE BEHAVIOUR OF LUBRICATING GREASES IN THE PRESENCE OF WATER; STATIC TEST |
| DIN 51501:1979-11 | LUBRICANTS - LUBRICATING OILS L-AN - MINIMUM REQUIREMENTS |
| DIN 51369:1981-07 | TESTING OF COOLING LUBRICANTS; DETERMINATION OF THE PH VALUE OF WATER-MIXED COOLING LUBRICANTS |
| DIN 51360-2:1981-07 | TESTING OF COOLING LUBRICANTS; DETERMINATION OF CORROSION PREVENTING CHARACTERISTICS OF COOLING LUBRICANTS MIXED WITH WATER; CHIP/FILTER PAPER METHOD |
| DIN 51415:1981-07 | TESTING OF LIQUID FUELS - TEST ON THE BEHAVIOUR OF AVIATION FUELS IN THE PRESENCE OF WATER |
| DIN 51520:1995-10 | LUBRICANTS - METALWORKING FLUIDS - STRAIGHT CUTTING OILS (NON AQUEOUS FLUIDS) SN; SPECIFICATIONS |
| DIN 51550:1978-12 | VISCOMETRY - DETERMINATION OF VISCOSITY - GENERAL PRINCIPLES |
| DIN 51554-2:1978-09 | TESTING OF MINERAL OILS; TESTING OF AGEING ACCORDING TO BAADER - TESTING AT 110 DEGREES C |
| DIN 51807-2:1990-03 | TESTING OF LUBRICANTS; TEST ON THE BEHAVIOUR OF GREASES IN THE PRESENCE OF WATER; DYNAMIC TESTS |
| DIN 51872-4:1990-06 | TESTING OF GASEOUS FUELS AND OTHER GASES; DETERMINATION OF THE MAIN COMPONENTS, GAS-CHROMATOGRAPHIC PROCEDURE |
| DIN 53213-1:1978-04 | TESTING OF PAINTS, VARNISHES AND SIMILAR PRODUCTS CONTAINING SOLVENTS - FLASHPOINT TEST USING CLOSED CUP, DETERMINATION OF FLASHPOINT |
| DIN 53229:1989-02 | PAINTS, VARNISHES AND SIMILAR COATING MATERIALS - DETERMINATION OF VISCOSITY AT HIGH SHEAR RATES USING ROTATIONAL VISCOMETERS |
| DIN 51408-1:1983-06 | TESTING OF LIQUID MINERAL OIL HYDROCARBONS; DETERMINATION OF CHLORINE CONTENT; WICKBOLD'S COMBUSTION METHOD |
| DIN 51801-2:1980-12 | DETERMINATION OF DROPPING POINT; UBBELOHDE METHOD FOR BITUMINOUS BINDERS |
| DIN 51769-1:1981-10 | TESTING OF PETROLEUM PRODUCTS - DETERMINATION OF LEAD CONTENT (TOTAL LEAD) - GENERAL WORKING PRINCIPLES |
| DIN 51577-3:1990-06 | TESTING OF MINERAL OIL HYDROCARBONS AND SIMILAR PRODUCTS; DETERMINATION OF CHLORINE AND BROMINE CONTENT; MASS FRACTION < 1000 MG/KG, ANALYSIS BY WAVELENGTH DISPERSIVE X-RAY SPECTROMETRY (XRS) |
| DIN 51413-7:1990-05 | TESTING OF LIQUID MINERAL OIL HYDROCARBONS - ANALYSIS BY GAS CHROMATOGRAPHY - DETERMINATION OF OXYGENATES AND THE OXYGEN CONTENT - PROCEDURE BY OXYGEN-SPECIFIC DETECTOR (O-FID) |
| DIN 53917:1981-01 | SURFACE ACTIVE AGENTS; DETERMINATION OF THE CLOUD POINT TEMPERATURE (CLOUD POINT) OF NON-IONIC SURFACE ACTIVE AGENTS OBTAINED FROM ETHYLENE OXIDE |
| DIN 51790-3:1978-04 | TESTING OF LIQUID FUELS; DETERMINATION OF VANADIUM CONTENT; VANADIUM CONTENT IN THE RANGE OF 0.4 TO 4.0 MG/KG; DETERMINATION BY FLAMELESS ATOMIC ABSORPTION SPECTROSCOPY AFTER INCINERATION |
| DIN 53621-7:1977-07 | TESTING OF RUBBER AND ELASTOMERS - QUANTITATIVE DETERMINATION OF POLYMERS - DETERMINATION OF THE STYRENE CONTENT AND CALCULATION OF THE CONTENT OF STYRENE-BUTADIENE COPOLYMER |
| DIN 52007-1:1980-12 | TESTING OF BITUMINOUS BINDERS; DETERMINATION OF VISCOSITY; GENERAL PRINCIPLES AND EVALUATION |
| DIN 52007-2:1980-12 | TESTING OF BITUMINOUS BINDERS; DETERMINATION OF VISCOSITY; MEASUREMENT BY DRAWN-SPHERE VISCOMETER |
| DIN 51604-1:1982-11 | FAM TESTING FLUID FOR POLYMER MATERIALS; COMPOSITION AND REQUIREMENTS |
| DIN 51848-3:1989-08 | TESTING OF MINERAL OILS; PRECISION OF TEST METHODS; CALCULATION OF REPEATABILITY AND REPRODUCIBILITY DATA |
| DIN 1333-2 : 1972 | PRESENTATION OF NUMERICAL DATA - ROUNDING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.