DIN EN 10025-2:2011-04 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
Hardcopy , PDF
07-03-2021
German
01-01-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
2.1 Allgemeine Normen
2.2 Normen für Masse und Grenzabmasse
2.3 Prüfnormen
3 Begriffe
4 Einteilung und Bezeichnung
4.1 Einteilung
4.1.1 Hauptgüteklassen
4.1.2 Sorten und Gütegruppen
4.2 Bezeichnung
5 Bestellangaben
5.1 Verbindliche Angaben
5.2 Optionen
6 Herstellverfahren
6.1 Stahlherstellverfahren
6.2 Desoxidation
6.3 Lieferzustand
7 Anforderungen
7.1 Allgemeines
7.2 Chemische Zusammensetzung
7.3 Mechanische Eigenschaften
7.3.1 Allgemeines
7.3.2 Kerbschlageigenschaften
7.3.3 Verbesserte Verformungseigenschaften senkrecht zur
Erzeugnisoberfläche
7.4 Technologische Eigenschaften
7.4.1 Schweisseignung
7.4.2 Umformbarkeit
7.4.3 Eignung zum Schmelztauchverzinken
7.4.4 Bearbeitbarkeit
7.5 Oberflächenbeschaffenheit
7.5.1 Band
7.5.2 Blech und Breitflachstahl
7.5.3 Profile
7.5.4 Stäbe und Walzdraht
7.6 Innere Beschaffenheit
7.7 Masse, Grenzabmasse, Formtoleranzen, Masse
8 Prüfung
8.1 Allgemeines
8.2 Art der Prüfung und Prüfbescheinigung
8.3 Prüfumfang
8.3.1 Probenahme
8.3.2 Prüfeinheiten
8.3.3 Nachweis der chemischen Zusammensetzung
8.4 Bei spezifischen Prüfungen durchzuführende Prüfungen
9 Vorbereitung von Probenabschnitten und Proben
9.1 Entnahme und Vorbereitung von Probenabschnitten
für die chemische Analyse
9.2 Lage und Richtung von Probenabschnitten und
Proben für mechanische Prüfungen
9.2.1 Allgemeines
9.2.2 Vorbereitung von Probenabschnitten
9.2.3 Vorbereitung von Proben
9.3 Identifizierung von Probenabschnitten und Proben
10 Prüfverfahren
10.1 Chemische Analyse
10.2 Mechanische Prüfungen
10.3 Ultraschallprüfung
10.4 Wiederholungsprüfungen
11 Kennzeichnung, Beschilderung, Verpackung
12 Beanstandungen
13 Optionen
Anhang A (informativ) Liste der früheren Bezeichnungen
vergleichbarer Stähle
Anhang B (informativ) Liste der den zitierten EURONORMEN
entsprechenden nationalen Normen
Literaturhinweise
This standard is included in DIN Handbook 69, 70, 402, 93, 67 and DIN DVS Handbook 191. Specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities.
| DevelopmentNote |
Supersedes DIN EN 10113-2 and DIN EN 10025. (02/2005) DRAFT 2011 issued in April 2011. (05/2011)
|
| DocumentType |
Draft
|
| Pages |
36
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| I.S. EN 10025-2:2004 | Identical |
| SN EN 10025-2 : 2005 | Identical |
| NEN EN 10025-2 : 2004 | Identical |
| NF EN 10025-2 : 2005 | Identical |
| NBN EN 10025-2 : 2005 COR 2005 | Identical |
| UNI EN 10025-2 : 2005 | Identical |
| NS EN 10025-2 : 1ED 2005 | Identical |
| ONORM EN 10025-2 : 2005 | Identical |
| BS EN 10025-2:2004 | Identical |
| UNE-EN 10025-2:2006 | Identical |
| DIN 28124-4:2010-09 | Manhole closures - Part 4: Swivel devices |
| BWB TL 7195-0011 : 5ED 2007 | |
| DIN 488-5:2009-08 | Reinforcing steels - Lattice girders |
| DIN 21530-2:2016-09 | MINE SUPPORT - PART 2: DIMENSIONS, DESIGNATION AND STATICAL VALUES |
| KTA 3204 : 2015 | |
| I.S. EN 50341-2-4:2016 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-4: NATIONAL NORMATIVE ASPECTS (NNA) FOR GERMANY (BASED ON EN 50341-1:2012) |
| DIN HDBK 93 : 10ED 2016 | STAHLBAUARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18335 |
| DIN 28124-1:2010-09 | Manhole closures - Part 1: For unpressurized vessels |
| DIN HDBK 70 : 9ED 2013 | PUTZ- UND STUCKARBEITEN VOB/STLB - VOB TEIL B: DIN 1961, VOB TEIL C: ATV DIN 18299, ATV DIN 18350 |
| DIN 28124-2:2010-09 | Manhole closures - Part 2: For pressure vessels, from steel |
| DIN 18800-7:2008-11 | STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION |
| DIN 28082-1:2016-04 | SKIRTS FOR APPARATUS - PART 1: WITH SIMPLE BOTTOM RING |
| DIN 18302:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - BOREHOLE SINKING OPERATIONS |
| DIN 87160-1:2015-05 | METAL STRAINERS, DN 20 TO 200 - PART 1: ASSEMBLY |
| BS EN 50341-2-4:2016 | Overhead electrical lines exceeding AC 1 kV National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012) |
| DIN 28081-2:2015-06 | SUPPORTS FOR VESSELS - PART 2: STEEL PROFILE SUPPORTS FOR VESSELS |
| DIN 87346:2016-05 (Draft) | REMOTE HANDLING TUBES FOR MANUAL OPERATION - BEARINGS |
| DIN 30681:2013-12 | COMPENSATORS FOR GAS-INSTALLATIONS - EXPANSION JOINTS WITH STAINLESS STEEL BELLOWS UNIT - SAFETY REQUIREMENTS, TESTING, MARKING |
| DIN 87351:2016-05 (Draft) | REMOTE HANDLING TUBES FOR MANUAL OPERATION - SPINDLE EXTENSIONS, PUSH-IN CONNECTIONS, RECTANGULAR WELDED PIVOTS |
| DIN HDBK 402 : 5ED 2009 | STAHL UND EISEN: GUETENORMEN 2 - BAUWESEN, METALLVERARBEITUNG - BETONSTAHL - STAEHLE FUER DEN STAHLBAU - FLACHERZEUGNISSE OHNE UEBERZUEGE - FLACHERZEUGNISSE MIT UEBERZUEGEN - SPUNDBOHLEN - VERPACKUNGSBLECH |
| DIN 18360:2019-09 | German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Metal construction works |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| BWB TL 8135-0029 : 6ED 2009 | AUXILIARY MEANS OF PACKAGING POLYURETHANE FOAM |
| DIN 83202-2:2015-06 | LADDERS ON SHIPS - PART 2: MEDIUM TYPE |
| DIN 55634:2016-10 (Draft) | PAINTS, VARNISHES AND COATINGS - CORROSION PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS MADE OF STEEL |
| DIN 743-3:2012-12 | Calculation of load capacity of shafts and axles - Part 3: Strength of materials |
| DIN 82101:2005-09 | Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel |
| DIN HDBK 69 : 11ED 2009 | |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| DIN 4124:2012-01 | EXCAVATIONS AND TRENCHES - SLOPES, PLANKING AND STRUTTING BREADTHS OF WORKING SPACES |
| DIN 83216:2013-03 | STAIRS AND GUARD RAILS FOR STAIRS FOR OUTSIDE AND INSIDE AREA ON SEAGOING SHIPS - GUARD RAILS |
| DIN 83215:2013-03 | STAIRS AND GUARD RAILS FOR STAIRS FOR OUTSIDE AND INSIDE AREA ON SEAGOING SHIPS - STAIRS |
| DIN 28081-1:2015-06 | SUPPORTS FOR VESSELS - PART 1: TUBULAR SUPPORTS FOR VESSELS |
| DIN 3859-1:2005-09 | Compression couplings - Part 1: Technical delivery conditions |
| DIN 83202-3:2015-06 | LADDERS ON SHIPS - PART 3: HEAVY TYPE |
| DIN 18360:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - METALWORK |
| BWB TL 9150-0084 : 2ED 2014 | LUBRICATING OIL, CHAIN; NATO CODE: N.A.; BUNDESWEHR CODE: OY1000 |
| DIN 32525-4:2010-05 | Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing |
| DIN 3223:2012-11 | HANDLING KEYS FOR VALVES |
| DIN 21530-3:2016-09 | MINE SUPPORT - PART 3: REQUIREMENTS |
| DIN 86111:2016-08 | WELD-IN DECK SCREW CAPS FOR FILLING AND SOUNDING PIPES |
| DIN 83218:2007-06 | STEEL LADDERS FOR CARGO TANKS IN VESSELS |
| DIN EN 10210-1:2016-01 (Draft) | Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016 |
| DIN 1026-1:2009-09 | Hot rolled steel channels - Part 1: Taper flange steel channels - Dimensions, masses and sectional properties |
| DIN 28080:2015-06 | SADDLE SUPPORTS FOR HORIZONTAL APPARATUS |
| DIN 1025-1:2009-04 | Hot rolled I-sections - Part 1: Narrow flange I-sections, I-series - Dimensions, masses, sectional properties |
| EN 50341-2-4:2016 | Overhead electrical lines exceeding AC 1 kV - Part 2-4: National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012) |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN 87349:2016-05 (Draft) | REMOTE HANDLING TUBES FOR MANUAL OPERATION - BEVEL GEAR UNITS |
| DIN 18516-1:2010-06 | Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing |
| DIN 14900:2015-09 | AXE FOR FIRE FIGHTERS WITH PROTECTIVE COVER |
| DIN 28082-2:2016-08 | SKIRTS FOR APPARATUS - PART 2: BOTTOM RING WITH BRACKET SUPPORTS OR TWIN RING WITH WEBS |
| DIN 81249-2:2013-05 | CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER |
| DIN 86285:2016-08 | FLANGES FOR INTERNATIONALLY UNIFORM CONNECTION FOR THE DISPOSAL OF OIL RESIDUES |
| DIN DVS HDBK 191 : 11ED 2014 | AUSWAHL VON NORMEN FUER DIE AUSBILDUNG DES SCHWEISSTECHNISCHEN PERSONALS |
| DIN 87160-2:2015-05 | METAL STRAINERS, DN 20 TO DN 200 - PART 2: COMPONENTS |
| DIN 83202-1:2009-07 | LADDERS ON SHIPS - PART 1: LIGHT TYPE |
| DIN HDBK 67 : 5ED 2013 | |
| DIN 28124-3:2013-07 | Manhole closures - Part 3: For pressure, covered |
| KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 10056-2:1993 | Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| EN 10279:2000 | Hot rolled steel channels - Tolerances on shape, dimensions and mass |
| EN 10034:1993 | Structural steel I and H sections - Tolerances on shape and dimensions |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10024:1995 | Hot rolled taper flange I sections - Tolerances on shape and dimensions |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10306:2001 | Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams |
| EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
| EN 10060:2003 | Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| ISO 14713:1999 | Protection against corrosion of iron and steel in structures Zinc and aluminium coatings Guidelines |
| EN 10017:2004 | Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10061:2003 | Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10059:2003 | Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10055:1995 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| EN 10067:1996 | Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
| EN ISO 14713 : 1999 | PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.