DIN EN 10216-1:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
DIN EN 1993-1-7/NA:2010-12
|
NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING |
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
EN ISO 17663:2009
|
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009) |
DIN EN 1991-1-5:2010-12
|
Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions (includes Corrigendum AC:2009) |
KTA 3205.3 : 2006(R2011)
|
COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 3: SERIES-PRODUCTION STANDARD SUPPORTS |
EN ISO 5817:2014
|
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
DIN EN 10216-5:2014-03
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
ISO 13920:1996
|
Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
EN 10025-4:2004
|
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
DIN EN 10025-4:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
DIN EN 1993-1-1:2010-12
|
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
DIN EN 10222-2:2013-01 (Draft)
|
STEEL FORGINGS FOR PRESSURE PURPOSES - PART 2: FERRITIC AND MARTENSITIC STEELS WITH SPECIFIED ELEVATED TEMPERATURES PROPERTIES |
EN 1991-1-6:2005/AC:2013
|
Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution |
DIN EN 1993-1-10:2010-12
|
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (includes Corrigendum AC:2009) |
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
DIN EN ISO 9606-1:2013-12
|
QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
EN ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
KTA 3211.3 : 2012 COR 2016
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 3: MANUFACTURE |
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
DIN EN 1993-1-5:2010-12
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
EN 1991-1-7:2006/A1:2014
|
EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS |
EN 1993-1-5:2006/A1:2017
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
DIN EN 1090-3:2008-09
|
EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
ISO 14732:2013
|
Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
DIN EN 1991-1-7:2010-12
|
Eurocode 1: Actions on structures - Part 1-7: General actions - Accidental actions (includes Corrigendum AC:2010) |
EN 10088-3:2014
|
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
DIN EN 10025-5:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
DIN EN 1993-1-9:2010-12
|
Eurocode 3: Design of steel structures - Part 1-9: Fatigue (includes Corrigendum AC:2009) |
DIN 7990:2017-08
|
HEXAGON HEAD BOLTS WITH HEXAGON NUT FOR STEEL STRUCTURES |
DIN EN 10216-3:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
DIN EN ISO 14732:2013-12
|
WELDING PERSONNEL - QUALIFICATION TESTING OF WELDING OPERATORS AND WELD SETTERS FOR MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS (ISO 14732:2013) |
EN 1991-1-3:2003/A1:2015
|
EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
ISO 14731:2006
|
Welding coordination Tasks and responsibilities |
DIN EN 1993-1-4:2015-10
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
ISO 17663:2009
|
Welding — Quality requirements for heat treatment in connection with welding and allied processes |
DIN EN ISO 13916:1996-11
|
WELDING - MEASUREMENT OF PREHEATING TEMPERATURE, INTERPASS TEMPERATURE AND PREHEAT MAINTENANCE TEMPERATURE (ISO 13916:2017) |
EN 1090-3:2008
|
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
DIN EN 1993-1-8:2010-12
|
Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
DIN EN 10028-7:2016-10
|
FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN 10025-2:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN ISO 14732:2013
|
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
DIN EN 10250-1:1999-12
|
Open die steel forgings for general engineering purposes - Part 1: General requirements |
KTA 3201.2 : 2013
|
COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
DIN EN 10210-2:2016-02 (Draft)
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
DIN EN ISO 3506-1:2010-04
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
DIN EN 1993-1-7:2010-12
|
Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading (includes Corrigendum AC:2009) |
EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 1090-1:2009+A1:2011
|
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
DIN EN 10222-5:2013-01 (Draft)
|
STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
VDTUEV 427/1 WERKSTOFFBLAETTER : 2001 SUPP 2017
|
Fine-grain structural steel 15 MnNi 6 3, material no.1.6210 Manufacturer: Sheet metal |
DIN EN 10217-7:2015-01
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN 1011-2:2001/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
DIN EN 14399-4:2015-04
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES |
DIN EN 1993-1-4 NA : 2016
|
NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
EN 10210-2:2006/AC:2007
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
EN 1991-1-2:2002/AC:2013
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
EN 10088-5:2009
|
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
EN 10272:2016
|
Stainless steel bars for pressure purposes |
EN 1991-1-5:2003/AC:2009
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
EN 1993-1-4:2006/A1:2015
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
DIN EN 10216-2:2014-03
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
EN ISO 13920:1996
|
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996) |
DIN EN 10204:2005-01
|
Metallic products - Types of inspection documents; German version EN 10204:2004 |
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
DIN EN 1991-1-5/NA:2010-12
|
NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS |
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
EN 10250-4:1999
|
Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
EN 10296-2:2005/AC:2007
|
WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
EN 10250-1:1999
|
Open die steel forgings for general engineering purposes - Part 1: General requirements |
DIN EN ISO 3506-2:2010-04
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
DIN EN 1993-1-3:2010-12
|
Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009) |
DIN EN 1991-1-3:2010-12
|
Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads (includes Corrigendum AC:2009) |
EN 10250-2:1999
|
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
EN 10025-5:2004
|
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
EN ISO 14731:2006
|
Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
DIN EN 10088-5:2009-07
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 10088-4:2009
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ISO 9001:2015
|
Quality management systems — Requirements |
EN 14399-4:2015
|
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies |
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions |
DIN EN 1991-1-2:2010-12
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
DIN 267-13:2007-05
|
FASTENERS - TECHNICAL SPECIFICATIONS - PART 13: PARTS FOR BOLTED CONNECTIONS WITH SPECIFIC MECHANICAL PROPERTIES FOR USE AT TEMPERATURES RANGING FROM -200 DEGREE C TO +700 DEGREE C |
EN 10083-2:2006
|
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
EN 1090-2:2008+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 1993-1-3:2006/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
EN 10025-6:2004+A1:2009
|
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
DIN EN ISO 9001:2015-11
|
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
KTA 3211.4 : 2013
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUITY - PART 4: IN-SERVICE INSPECTIONS AND OPERATIONAL MONITORING |
EN 1993-1-9:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE |
DIN EN 10025-3:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
DIN EN 10269:2014-02
|
STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
KTA 3205.1 : 2002(R2007)
|
COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 1: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
DIN EN 1090-2:2015-07 (Draft)
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
DIN EN ISO 17663:2009-10
|
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2009) |
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
EN 1991-1-4:2005/A1:2010
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
DIN EN 1993-1-3/NA:2010-12
|
NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
ISO 13916:2017
|
Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
EN 1993-1-8:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
DIN EN 1990:2010-12
|
Eurocode: Basis of structural design (includes Amendment A1:2005 + Corrigendum A1:2005/AC:2010) |
EN 10025-3:2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
EN 1993-1-7:2007/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-7: PLATED STRUCTURES SUBJECT TO OUT OF PLANE LOADING |
EN 10083-3:2006/AC:2008
|
STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
DIN EN 10025-6:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
EN 1993-1-10:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
DIN EN 10273:2016-10
|
HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
DIN EN 10272:2016-10
|
STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
DIN EN 1991-1-6:2010-12
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-6: GENERAL ACTIONS, ACTIONS DURING EXECUTION |
EN 10250-3:1999
|
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
EN 1993-1-1:2005/A1:2014
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |
DIN EN 10088-4:2010-01
|
Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |