EN 10306:2001

Current

Current The latest, up-to-date edition.

Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams

Available format(s):

Language(s):

Published date: 12-12-2001

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Items for agreements
5 Principle
6 Procedure
7 Personnel qualification
8 Ultrasonic test equipment
   8.1 Instrument
   8.2 Probe
   8.3 Calibration blocks
   8.4 Reference blocks
   8.5 Couplant
9 Routine calibration and checking
10 Stage of manufacture
11 Surface condition
12 Sensitivity setting
13 Scanning
   13.1 General
   13.2 Testing of the beams
   13.3 Scanning speed
14 Evaluation of discontinuities
15 Recording level and acceptance criteria
16 Test report
Annex A (informative) List of equivalent terms in several
        European languages
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard describes a reflection method for the ultrasonic testing of H beams with parallel flanges and IPE beams for the detection of presence of internal discontinuities. Mechanised, semi-automatic or automatic techniques may be used but should be agreed between the purchaser and the supplier.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 1
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NS EN 10306 : 1ED 2002	Identical
NF EN 10306 : 2002	Identical
I.S. EN 10306:2002	Identical
SN EN 10306 : 2001	Identical
UNI EN 10306 : 2003	Identical
NBN EN 10306 : 2002	Identical
NEN EN 10306 : 2002	Identical
BS EN 10306:2002	Identical
UNE-EN 10306:2002	Identical
PN EN 10306 : 2004	Identical
DIN EN 10306:2002-04	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE-EN 10088-5:2010	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
11/30239476 DC : 0	BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
17/30346738 DC : 0	BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS
BS EN 10088-5:2009	Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
16/30338590 DC : 0	BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
08/30190326 DC : DRAFT DEC 2008	BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10025-4:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
PREN 10025-5 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
I.S. EN 10088-5:2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
BS EN 10025-5:2004	Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance
BS EN 10025-2:2004	Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels
BS EN 10025-3:2004	Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DIN EN 10025-5:2005-02	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
EN 10088-3:2014	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10025-1:2004	Hot rolled products of structural steels - Part 1: General technical delivery conditions
DIN EN 10025-4:2005-02	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
PREN 10025-3 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
PREN 10164 : DRAFT 2016	STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
DIN EN 10025-2:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
DIN EN 10025-3:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
BS EN 10025-4:2004	Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10164:2004	Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
ISO 7778:2014	Through-thickness characteristics for steel products
EN 10025-3:2004	Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
I.S. EN 10088-3:2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10088-3:2014-12	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 10025-1:2005-02	Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
11/30239479 DC : 0	BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
UNI EN 10088-5 : 2009	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
PREN 10025-4 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
I.S. EN 10025-2:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
11/30239482 DC : 0	BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
11/30239473 DC : 0	BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10164:2005	STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10025-3:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
PREN 10025-2 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
EN 10025-2:2004/AC:2005	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
I.S. EN 10225:2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10088-3:2015	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 10225:2010	Weldable structural steels for fixed offshore structures - Technical delivery conditions
UNI EN 10088-3 : 2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10225 : 2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10025-1:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
12/30257641 DC : 0	BS ISO 7778 - THROUGH-THICKNESS CHARACTERISTICS FOR STEEL PRODUCTS
11/30254168 DC : 0	BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10088-5:2009-07	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10025-4:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
EN 10025-4:2004	Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
NF EN 10225 : 2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10225:2009-10	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
BS EN 10025-1:2004	Hot rolled products of structural steels General technical delivery conditions
BS EN 10088-3:2014	Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10225:2009	Weldable structural steels for fixed offshore structures - Technical delivery conditions
PREN 10088-3 : DRAFT 2011	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
11/30239485 DC : 0	BS EN 10025-5 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
DIN EN 10025-5:2011-04 (Draft)	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
I.S. EN 10025-5:2004	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE
PREN 10025-1 : DRAFT 2011	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
EN 10025-5:2004	Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
DIN EN 10164:2016-04 (Draft)	STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
BS EN 10164:2004	Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
DIN EN 10025-1:2011-04 (Draft)	Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
BS EN 10225:2009	Weldable structural steels for fixed offshore structures. Technical delivery conditions
EN 10088-5:2009	Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

Standards Referencing This Book - (Show below) - (Hide below)

EN 12668-2:2010	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
EN 1330-2:1998	Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods
EN 1330-4:2010	Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing
EN 12668-1:2010	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN 473:2008	Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 583-5:2000/A1:2003	NON DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - PART 5: CHARACTERIZATION AND SIZING OF DISCONTINUITIES
EN 583-2:2001	Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
EN 1330-1:2014	NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
EN 12223:1999	Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1
EN 12668-3:2013	Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart