DIN EN 10048:1996-10
Current
The latest, up-to-date edition.
HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
Hardcopy , PDF
English
01-10-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen
4 Lieferarten und Lieferzustand
4.1 Lieferarten
4.2 Lieferzustand
5 Bestellangaben
6 Bezeichnung
7 Grenzabmasse
7.1 Dicke und Bombierung
7.2 Breite
7.3 Länge (bei Stäben)
8 Formtoleranzen
8.1 Seitengeradheit
8.2 Form der Rollen
8.3 Rechtwinkligkeit
9 Prüfung
9.1 Dicke
9.2 Breite
9.3 Seitengeradheit
10 Verpackung
11 Zusätzliche Anforderungen
Anhang A (informativ)
Liste der nationalen Bezeichnungen und
Lieferbedingungen für die zu den
Klassen B, C und D gehörenden Stähle
nach Tabelle 4
Anhang B (informativ)
Liste der den zitierten EURONORMEN
entsprechenden nationalen Normen
This standard is included in DIN Handbook 28, 67 and 349. Applicable to uncoated hot rolled narrow steel strip less than 600 mm in width made from specified steel grades. Not applicable to hot rolled wide strip and narrow strip (more than 600 mm wide) achieved by slitting hot rolled wide strip.
| DevelopmentNote |
Supersedes DIN 1016. (06/2002) Supersedes VG 1016-2 (03/2003)
|
| DocumentType |
Standard
|
| Pages |
25
|
| ProductNote |
Supersedes DIN 1016. (SHM 06/2002) Supersedes VG 1016-2 (ABM 03/2003)
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 10048:1996 | Identical |
| NEN EN 10048 : 1997 | Identical |
| ISO 9444:2002 | Identical |
| EN 10113-2 : 1993 | HOT-ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED STEELS |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| EN 10137-3 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR PRECIPITATION HARDENED STEELS |
| EURONORM 89 : 1971 | ALLOY STEELS FOR HOT-FORMED HEAT-TREATABLE SPRINGS; QUALITY SPECIFICATIONS |
| EN 10028-6:2017 | Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
| EN 10149-2:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels |
| EURONORM 132 : 1979 | COLD ROLLED STEEL STRIPS FOR SPRINGS; TECHNICAL TERMS OF DELIVERY |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EURONORM 96 : 1979 | TOOL STEELS - TECHNICAL TERMS OF DELIVERY |
| DIN EN 10051:2011-02 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EURONORM 86 : 1970 | STEELS FOR FLAME-HARDENING AND INDUCTION-HARDENING - QUALITY SPECIFICATIONS |
| EN 10137-2 : 1995 | PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - DELIVERY CONDITIONS FOR QUENCHED AND TEMPERED STEELS |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| EN 10155 : 1993 | STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - TECHNICAL DELIVERY CONDITIONS |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| DIN 17350:1980-10 | TOOL STEELS - TECHNICAL CONDITIONS OF DELIVERY |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN 10149-3:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels |
| EURONORM 85 : 1970 | NITRIDING STEELS; QUALITY SPECIFICATIONS |
| EN 10113-3 : 1993 | HOT ROLLED PRODUCTS IN WELDABLE FINE GRAIN STRUCTURAL STEELS - DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED STEELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.