![header thumbnail](/images/publishers\din_cover.gif)
DIN EN 14313:2016-03
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\din_cover.gif)
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION
Hardcopy , PDF
English, German
01-01-2016
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units
and abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the
Constancy of Performance (AVCP)
8 Marking and labeling
Annex A (normative) - Factory production control
Annex B (normative) - Determination of minimum
service temperature
Annex C (informative) - Additional properties
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation
Bibliography
Describes the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately -80 degrees C to +150 degrees C.
DocumentType |
Standard
|
Pages |
41
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
EN 14313:2015 | Identical |
VDI 2055 Blatt 2:2013-10 | Thermal insulation of heated and refrigerated operational installations in the industry and in the building services - Technical basics for the verification of properties of insulating materials |
VDI 2055 Blatt 1:2008-09 | Thermal insulation of heated and refrigerated operational installations in the industry and the building services - Calculation rules |
DIN 4140 E : 1996 | INSULATION WORK ON INDUSTRIAL INSTALLATIONS AND BUILDING EQUIPMENT - EXECUTION OF THERMAL AND COLD INSULATIONS |
DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
DIN 4140:2014-04 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
DIN 4140:1996-11 | INSULATION WORK ON INDUSTRIAL INSTALLATIONS AND BUILDING EQUIPMENT - EXECUTION OF THERMAL AND COLD INSULATIONS |
ISO 3822-1:1999 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement |
ISO 9229:2007 | Thermal insulation Vocabulary |
EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity |
EN 14706:2012 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
EN 12085:2013 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
VDI 2055 Blatt 2:2013-10 | Thermal insulation of heated and refrigerated operational installations in the industry and in the building services - Technical basics for the verification of properties of insulating materials |
EN ISO 23993:2010 | Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01) |
EN 13468:2001 | Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH |
EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
EN ISO 8497:1996 | Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994) |
EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
EN 13469:2012 | Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
ISO 23993:2008 | Thermal insulation products for building equipment and industrial installations — Determination of design thermal conductivity |
EN ISO 15758:2014 | Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems (ISO 15758:2014) |
EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
ISO 8497:1994 | Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
EN ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
EN ISO 4589-1:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017) |
VDI 2055 Blatt 1:2008-09 | Thermal insulation of heated and refrigerated operational installations in the industry and the building services - Calculation rules |
EN 13470:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
EN 13472:2012 | Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 14707:2012 | Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
EN 14366:2004 | Laboratory measurement of noise from waste water installations |
EN ISO 3822-1:1999/A1:2008 | ACOUSTICS - LABORATORY TESTS ON NOISE EMISSION FROM APPLIANCES AND EQUIPMENT USED IN WATER SUPPLY INSTALLATIONS - PART 1: METHOD OF MEASUREMENT |
EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
VDI 2055-3 : 2011 COR 2012 | THERMAL INSULATION OF HEATED AND REFRIGERATED OPERATIONAL INSTALLATIONS IN THE INDUSTRY AND THE BUILDING SERVICES - TECHNICAL BASICS FOR THE VERIFICATION OF THERMOTECHNICAL PROPERTIES OF INSULATION SYSTEMS, DETERMINATION OF TOTAL HEAT LOSSES |
ISO 4589-1:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
ISO 15758:2014 | Hygrothermal performance of building equipment and industrial installations Calculation of water vapour diffusion Cold pipe insulation systems |
EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.