DIN EN 1504-7:2015-09 (Draft)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
Hardcopy , PDF
07-03-2021
German
01-01-2015
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics for intended uses
5 Requirements
6 Sampling
7 Evaluation of conformity
8 Marking and labelling
Annex A (informative) Minimum frequency of testing for
factory production control
Annex B (informative) Release of dangerous substances
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the
EU Construction Products Directive
Describes requirements for the identification and the performance (including durability aspects) of products and systems for active and barrier coatings for protection of existing uncoated steel reinforcement and embedded steel in concrete structures under repair.
DevelopmentNote |
DRAFT 2015 issued in September 2015. (09/2015)
|
DocumentType |
Draft
|
Pages |
36
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Withdrawn
|
Standards | Relationship |
NF EN 1504-7 : 2006 | Identical |
NBN EN 1504-7 : 2007 | Identical |
NEN EN 1504-7 : 2006 | Identical |
NS EN 1504-7 : 1ED 2006 | Identical |
I.S. EN 1504-7:2007 | Identical |
UNI EN 1504-7 : 2007 | Identical |
UNE-EN 1504-7:2007 | Identical |
BS EN 1504-7:2006 | Identical |
EN 1504-7:2006 | Identical |
ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
EN 1767:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
EN 1015-4:1998 | Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) |
EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
EN 13062:2003 | Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement |
ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
EN ISO 3219:1994 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
EN 12614:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
EN 15184:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
ENV 1504-9 : DRAFT 1997 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.