DIN EN 15094:2009-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of machinery - Safety requirements for cold flat rolling mills
Hardcopy , PDF
01-12-2023
English, German
01-04-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe und Definitionen
4 Liste der signifikanten Gefährdungen
5 Sicherheitsanforderungen und/oder -massnahmen
5.1 Allgemeine Anforderungen an die Konstruktion,
Planung und Risikobewertung
5.1.1 Planung von Kaltflachwalzwerken
5.1.2 Bauliche Ausführung
5.1.3 Sicherheits-Lageplan
5.1.4 Zugang zu Bedienungsstellen
5.1.5 Zugang zu Gefahrbereichen
5.1.6 Trennende Schutzeinrichtungen
5.1.7 Geländer
5.1.8 Sicherheitszeichen und Warneinrichtungen
5.1.9 Sicherheitseinrichtungen
5.1.10 Persönliche Schutzausrüstung
5.1.11 Elektrische Ausrüstung
5.1.12 Hydraulik-, Pneumatik-, Kühl- und
Schmiersysteme
5.1.13 Flüssigkeitssysteme
5.1.14 Stoffe, die in Abflüsse entleert werden
5.1.15 Oberflächentemperaturen und
Wärmestrahlung
5.1.16 Bedienungsstände und Steuerstände
5.1.17 Software-Manipulation
5.1.18 Brandschutz
5.1.19 Ergonomische Grundsätze
5.1.20 Schwingungen
5.1.21 Energieverlust
5.1.22 Verbundene Ausrüstung
5.2 Liste der signifikanten Gefährdungen,
Gefährdungssituationen, Sicherheitsanforderungen
und/oder -massnahmen
5.2.1 Allgemein
5.2.2 Hydraulik, Pneumatik, Emulsionen und
sonstige Druckflüssigkeitssysteme
5.2.3 Übergänge über Rollgänge
und Produkt-/Materialführungen
5.2.4 Handhabungs-, Führungs- und
Transporteinrichtungen (allgemein)
5.2.5 Rollgänge und Transporteinrichtungen
5.2.6 Walzwerke, Walzgerüste
5.2.7 Bedienungs- und Steuerstände
5.2.8 Messvorrichtungen und Anzeigegeräte
5.2.9 Trenneinrichtungen
5.2.10 Auf- und Abwickeleinrichtungen
5.2.11 Coil-Abbinde- und Markierungsmaschinen
5.3 Zusätzliche Sicherheitsanforderungen
oder -massnahmen
5.3.1 Steuereinrichtung mit selbsttätiger
Rückstellung
5.3.2 Mechanische Rückhaltevorrichtungen
5.3.3 Zugängliche rotierende/bewegliche Teile
5.3.4 Besondere ergonomische Anforderungen
5.4 Geräuschminderung als Sicherheitsanforderung
5.4.1 Geräuschminderung an der Quelle durch
Konstruktion
5.4.2 Geräuschminderung durch Schutzmassnahmen
5.4.3 Geräuschminderung durch Information
5.4.4 Geräuschquellen und Beispiele für
geräuschmindernde Massnahmen
6 Überprüfung der Sicherheitsanforderungen
und/oder -massnahmen
7 Benutzerinformationen
7.1 Allgemein
7.2 Warneinrichtungen und Sicherheitszeichen
7.3 Mindestkennzeichnung
7.4 Begleitende Dokumente
7.4.1 Betriebsanleitung
7.4.2 Angaben zur Maschine/Ausrüstung
7.4.3 Detaillierte Angaben/Anweisungen
7.5 Wartungshandbuch
Anhang A (normativ) - Sicherheitsanforderungen
und/oder -massnahmen für elektrische
Ausrüstung und Steuerungen in
Kaltflachwalzwerken
A.1 Allgemein
A.2 Spezielle Anforderungen an die Steuerung
A.3 Besondere Anforderungen an die
Stillsetzungsausrüstung
A.3.1 Stillsetzungs-/Not-Halt-Funktion
A.3.2 Auswahl der Stillsetzungsfunktionen
A.3.3 Not-Halt-Bereiche
A.3.4 Stillsetzungsfunktionen
Anhang B (normativ) - Geräuschmessnorm
B.1 Einleitung
B.2 Bestimmung des A-bewerteten
Schallleistungspegels
B.3 Bestimmung des A-bewerteten Schalldruckpegels
B.3.1 Bestimmung des Emissions-Schalldruckpegels
an spezifizierten Messpunkten
B.3.2 Bestimmung des Emissions-Schalldruckpegels
an Arbeitsplätzen
B.4 Messunsicherheit
B.5 Betriebsbedingungen
B.6 Aufzubewahrende und berichtspflichtige Angaben
B.7 Angabe und Verifizierung von Geräuschemissionswerten
Anhang C (normativ) - Schutz von Personen bei Verwendung
von Stickgasen in Brandbekämpfungsanlagen
C.1 Allgemein
C.2 Warneinrichtungen
C.3 Rückhalteeinrichtungen
C.4 Vorwarnzeit
C.5 Unterbrechungseinrichtungen für Löschgas
C.6 Blockiereinrichtungen
C.7 Rohre
C.8 Räume und angrenzende Bereiche
C.9 Fluchtwege
C.10 Türen
C.11 Kennzeichnung
C.12 Betriebsanleitung
Anhang D (informativ) - Beispiele für
Sicherheitsanweisungen des Herstellers
für die Wartung von Kaltflachwalzwerken
D.1 Vorkehrungen zur Reduzierung von
Gefährdungen, die ausgelöst werden
durch
D.1.1 Fehlende Anweisungen
D.1.2 Sichtkontrollen oder akustische Tests
an laufenden Maschinen
D.1.3 Unbeabsichtigte Bewegungen während
der Wartung
D.1.4 Arbeiten während Stillstand mit
unwirksamen Schutzeinrichtungen
D.1.5 Arbeit mit gefährlichen Stoffen
D.1.6 Wiederanlaufen der Anlage
Anhang E (informativ) - Maschinen und/oder Ausrüstung,
die von dieser Norm behandelt werden
E.1 Maschinen, die von dieser Norm behandelt
werden, jedoch nicht auf diese begrenzt sind
E.1.1 Anlagen
E.1.2 Ausrüstung
Anhang F (informativ) - Abplatzen von Teilen der
Walzenoberfläche
F.1 Gefährdung
F.2 Ursachen
F.3 Sicherheitsmassnahmen
F.3.1 Erkennung
F.3.2 Handhabung
F.3.3 Aufzeichnungen
Anhang G (informativ) - Beispiel für Risikoanalyse
bezüglich Schnittstellen
Anhang ZA (informativ) - Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Richtlinie 98/37/EG
Anhang ZB (informativ) - Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Richtlinie 2006/42/EG
Literaturhinweise
Defines the safety requirements for cold rolling mills for flat products (coiled or as heavy plates).
| DocumentType |
Standard
|
| Pages |
65
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 15094:2008 | Identical |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
| EN 60825-4:2006/A2:2011 | SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| EN 14253:2003+A1:2007 | Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| DIN VDE 0833-1 : 2014-10 | ALARM SYSTEMS FOR FIRE, INTRUSION AND HOLD-UP - PART 1: GENERAL REQUIREMENTS |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| ISO 6183:2009 | Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
| EN 1248:2001+A1:2009 | Foundry machinery - Safety requirements for abrasive blasting equipment |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN ISO 11820:1996 | Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| EN 15004-1:2008 | Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2006, modified) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 11820:1996 | Acoustics — Measurements on silencers in situ |
| EN 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 746-3:1997+A1:2009 | Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 14520-1:2015 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 11064-1:2000 | Ergonomic design of control centres Part 1: Principles for the design of control centres |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 50171 : 2001 COR 2001 | CENTRAL POWER SUPPLY SYSTEMS |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN ISO 11064-1:2000 | Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000) |
| EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| EN ISO 11821:1997 | Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| ISO 11821:1997 | Acoustics — Measurement of the in situ sound attenuation of a removable screen |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.